Toshiba Dkt3210 Sd Instruction Manual

							IPT1020-SD Settings
IPT-to-IP Network Connection Instructions
Strata CTX DKT/IPT Telephone     11/0397
6. If the IPT is connected to a router or other gateway device, press . Enter the 
router address, then press 
%	. Only used if Step 3, above, is set for manual 
setting. 
7. Press 
. Enter a Station ID for the IPT and press %	. This is usually your 
telephone’s primary number (PDN).
8. Press 
  to enter the CTX Strata Net node number of the CTX node that contains 
the BIPU-M1A to which this IPT interfaces, then press 
%	. This FB setting is 
for CTX networked systems only.
9. Press 
 for BIPU IP address mode. Press one of the following:
: manual setting, then press %	. Press & and enter the BIPU IP address, 
then press 
%	. (e.g., if the BIPU IP address is “192.168.1.241,” enter it in this 
format 
&0 ,00&).
&: auto setting by broadcast, then press %	.
+: auto setting by multicast (IPT doesn’t support multicast setting in this first 
release), then press 
%	.
10. Press 
%	 again to set all the above data.
11. Go off-hook and hang up. The IPT will search for the BIPU-M1A, initialize and 
then set the IP address (from 20 sec. to 60 sec.). Time, Date and PDN displays on 
LCD when the information is set.
NoteSee “IP Telephone Start Up Sequence” below for an explanation of the LCDs 
that you will see during this procedure. 
						

							IPT1020-SD Settings
IPT-to-IP Network Connection Instructions
98Strata CTX DKT/IPT Telephone     11/03
IP Telephone Start Up Sequence
After the IP telephone network setting has been programmed, the following displays 
occur after the IP telephone is hung-up:
ActionLCD IndicationRemarks
1. IPT 
initializes.
2. IPT 
searches 
for IP 
address.Possible errors:
IP address is not 
set.
No DHCP server, 
etc.
If error occurs, IP address setting is carried out 
continuously.
3. IPT 
searches 
for BIPU.Retries every 10 seconds.
Possible errors:
BIPU is not found 
“time out.”
BIPU is not found 
(Station ID 
automatic setting).
BIPU is not found 
(StationID manual 
setting)
Multicast address is 
not registered 
(BIPU IP address 
setting mode is automatic setting by multicast)
BIPU IP address is 
not registered 
(BIPU IP address 
setting mode is manual setting.
INITIALIZING
PLEASE WAIT...
IPaddress setting...
IPaddress setting...
Can’t set IPaddress
Searching BIPU...
Searching BIPU..
BIPU not found
Searching BIPU..
Can’t get StationID
Searching BIPU..
StationID unmatch
Not exist Multicast addr
Not exist BIPU address 
						

							IPT1020-SD Settings
IPT1020-SD Function Settings
Strata CTX DKT/IPT Telephone     11/0399
IPT1020-SD Function Settings
These steps enable you to turn On/Off button beeps, room noise cancellation, handset 
Busy Override, and headset volume control. You can also adjust the setting for carbon 
headsets vs. non-carbon headsets. 
1. Press 
++ ++%	 (simultaneously).
2. Press 
 then %	.
3. Press the Feature Buttons to turn the LEDs On/Off (see Ta b l e  1 6).
4. Press 
%	 to set the above data.
5. Go off-hook and hang up. 
4. Registering 
to BIPUWhen registering fails, IPT retries by starting at 
Step 2 again.
Error message:
“Exxx” is error 
number.
5. Registering 
completion 
- normal 
action.LCD data is indicated from 
CTX. Example:
Table 16 IPT1020-SD Function Settings
FBLED ONLED OFF
FB1
Buttons beep. Buttons do not beep.
FB3Speakerphone/Microphone sensitivity 
is lower.Speakerphone/Microphone sensitivity is 
normal.
FB4Enable handset Busy Override (BOV) 
tone. Disable handset BOV.
FB11Turn LED On if carbon headset is 
attached.Turn LED Off if carbon headset is not 
attached.
ActionLCD IndicationRemarks
Registering IPT
Registering IPT
Can’t register IPT:EXXX
                                NO. 205 
FEB 28  THURSDAY  01:09 
						

							IPT1020-SD Settings
Setting the IPT1020-SD Headset Transmit Volume
100Strata CTX DKT/IPT Telephone     11/03
Setting the IPT1020-SD Headset Transmit 
Vo l u m e
1. Press ++ ++%	 (simultaneously).
2. Press 

.
3. Press the Feature Buttons to turn the LEDs On/Off for the desired volume 
transmission level (see Ta b l e  1 7).
4. Press FB4 for handset voice output in speakerphone mode (LED On = with, LED 
Off = without).
5. Press 
%	 to set the above data.
6. Go off-hook and hang up. 
Viewing IPT1020-SD Terminal Information
1. Press ++ ++%	 (simultaneously).
2. Press 
, then press %	.
3. Press 
 to view IPT firmware version (application and boot versions, read 
only).
4. Press 
& to view IPT MAC address (read only).
5. Go off-hook and hang up.
Table 17 Volume Level Transmitted from Headset Microphone
LEDSTransmit LevelFB3FB2FB1
ON ON ON Level 7 (min.)
ON ON OFF Level 6 
ON OFF ON Level 5 
ON OFF OFF Level 4
OFF ON ON Level 3 (initial value)
OFF ON OFF Level 2 
OFF OFF ON Level 1 
OFF OFF OFF Level 0 (max.) 
						

							Strata CTX DKT/IPT Telephone     11/03101
Index
A
abandoned call numbers (see Call 
History),37
about this book
conventions,viii
how to use this guide,viii
organization,vii
related documents,ix
access codes,54, 55, 73, 76
account codes,25, 73, 76
calls,25
forced,25
verified/non-verified,25
add-on module
⁄DSS console,81
advisory messaging,78
all call page,52
alphanumeric entry,69
ANI,37
answer a call,10
answering calls,9
attendant console,76
automatic
busy redial,73, 76
callback,28
callback cancel,73, 76
hold,18
line selection,8
automatic busy redial,27
automatic hold,18
B
background music (BGM),29, 73, 76
busy override,49
button
labels,89
programming,73
buttons
3000-series LCD,3, 6
DSS on ADMs and DSS consoles,83
extension,viii
FB,94
fixed,3, 5
flexible,3, 6
one touch,74
C
caller ID,37
call forward
access codes,73
any call,31
override,86
station,30
system,30
call history,37
call hold,18
calling,9
call park,76
orbits,37
call pickup,38, 73, 76 
						

							Index
D ~ G
102Strata CTX DKT/IPT Telephone     11/03
held calls,77
call recording,63
call transfer,13
call waiting,40, 50
centrex
application,87
feature buttons,87
CO line
call transfer,13
CO line buttons,7
CO line queuing,41
conference
calls,14, 77
hold,18
split/join/drop,16
voice mail,15
D
DADM,82
delayed ringing,88
dial pad,69
digital add-on module (DADM),82
direct inward system access (see DISA)
directories,69
direct station selection,66
buttons,41
DISA
security code,77
distinctive ringing,42
DKT2000-series telephones,4
DKT3000-series telephones,1
do not disturb,43, 77
override,49
door lock,44
control,77
door phone,45
calling,77
drop,16DSS,41
buttons on ADMs and DSS consoles,83
call answering,85
call forward override,86
calling,84
console,81, 83
night transfer,86
paging,86
speed dial,85
transferring,84
E
echo cancellation,46
emergency
call,77
page,52
emergency call,46
emergency ringdown,47
exclusive hold,18
executive override,50
extension number,viii
external directory,67
F
FB buttons,94
feature access codes,76
flash,73, 77
flexible buttons,3, 6
codes,73
flexible directory numbering,87
forced account codes (verified/non-
verified),25
G
group line button,7
group pickup,38 
						

							Index
H ~ P
Strata CTX DKT/IPT Telephone     11/03103
H
handset calling,9
handsfree answerback,10
hold,18
line hold,13, 38
hot dialing,8, 9
I
indicators
LED,80
internal directory,67
IPT1020-SD,4, 46, 93
ISDN
buttons,57, 91
J
join,16
L
language changes,77
language code,47
LCD
(large screen),65
3000-series buttons,3, 6
contrast,19
LCR
dialing out,77
LED indicators,80
line
access,7
automatic selection,8
buttons,7
ringing preference,8
line button,7, 13
M
making a call,9message waiting,11, 77
message waiting light
on another telephone,12
on phantom ext/MW,12
messaging
advisory,78
Mic button,12
microphone cut-off,47, 48, 73
Msg button/LED,11
N
names
storing speed dial,68
names (entering),69
network access,78
networked systems and stations,64
night ring answer,78
night transfer button,86
O
off-hook call announce (OCA),48, 78
one touch button,74, 75
outside line access,7
override
access codes,78
busy,49
call forward (DSS),86
do not disturb,49
executive,50
privacy,51
travelling class,79
override calls,49
P
paging,39, 86
access codes,73, 78
park,76 
						

							Index
R ~ V
104Strata CTX DKT/IPT Telephone     11/03
personal speed dial,55, 67
pickup,38
pick up group calls,39
pooled line group,7
privacy,53
override,51
private network access,78
programming
buttons,73
FB buttons,94
R
redial,13
repeat last number dialed,78
ringing
distinctive settings,42
line preference,8
ringing line preference,10
ringing repeat,87
S
signaling
tone,8
voice first,8
soft keys,22, 23
2000-phone location,6
3000-phone location,3
DKT3014 LCD,55, 66, 67
Stratagy voice mail,58
speakerphone,10
special characters for speed dialing,56
speed dial,54, 74
access codes,54, 55, 73, 79
names,68
personal,55, 67, 75
system,55, 67
speed dial (DADM or DSS),85
Spkr button,9answering,10
split,16
start application,79
storing speed dial names,68
system speed dial,55, 67
T
telephones
IPT1020-SD,4
tone
⁄pulse dialing,57
tone signaling,8
transfer,13
travelling class override,79
two (tandem) CO line connection,15
U
user programming,71, 73, 79
V
voice first signaling,8
voice mail
access codes,79
call record,63
conference,15
direct transfer,58
volume control,79, 80
voluntary account codes  (verified/non-
verified),26