Toshiba Dkt3210 Sd Instruction Manual

User Programming
Feature Codes
Strata CTX DKT/IPT Telephone     11/0377
All Call Page, Group Page and/or 
External Page Pickup of pageExt. button +  + Page Zone No. (01~08)
 + Ext. No. of another phone being paged.
Call Pickup for calls on Hold
Local Pickup (call held on this phone)
Ext. button + 
Remote Pickup (pickup another 
extension)Ext. button + + Primary Ext. No.
Pickup an Outside Line on HoldExt. button + + Outside Line on hold (001~128)
Pickup a an on HoldExt. button +...

User Programming
Feature Codes
78Strata CTX DKT/IPT Telephone     11/03
Retrieve a received MWExt. button + 
Activate MW at another Station 
without Ringing + Ext. no. (where you want to light the MW LED)
Cancel MW at another Station 
without Ringing
 + Ext. no. (where you want to turn off the MW LED)
Messaging - Advisory
Advisory Message - ActivationExt. or Phantom Ext. button + + Message No. (see 
table in “Advisory Messages” on page 24). Hang up.
Advisory Message - CancellationExt. or...

User Programming
Feature Codes
Strata CTX DKT/IPT Telephone     11/0379
Speed Dial (Storing an SD number)
Station
2 + QQQ + Phone No.3 + 
nnn = 100~199 SD bin numbers
System2 + QQQ + Phone No.3 + 
nnn = 200~999 SD bin numbers
Speed Dial (Dialing a stored SD number)
Station
26SGLDO4+QQQ
nnn = 100~199 Station SD bin numbers
System26SGLDO4+QQQ
nnn = 200~999 System SD bin numbers
Start Application
Travelling Class Override
Enter Code
, then dial number (enter LCR code if required)
Change...

User Programming
LED Indicator Details
80Strata CTX DKT/IPT Telephone     11/03
LED Indicator Details
Each line and feature button has a LED next to it which indicates the status of the line 
or feature associated with the button. Line LEDs light red or green and flash at varying 
rates to indicate call status (see Table 14).
Table 14 LED Indicators 
LEDYour Station (Green)Other Station (Red)
Interval Rates
Extension In-Use
(access outside line)2 seconds On, 1/8 second Off
— 1/8 second On/Offsteady...

Strata CTX DKT/IPT Telephone     11/0381
DADM/DSS Console6
This chapter provides an overview of the following two optional units and describes 
the features, buttons and associated LEDs. It describes the various models for the 
following two types of units.
Digital Add-on Module (DADM) – adds 20 line/feature buttons to digital 
telephones. Up to two DADMs can be connected to a telephone.
Direct Station Selection (DSS) Console – adds 60 line/feature buttons to a digital 
telephone. Available for system...

DADM/DSS Console
DADM
82Strata CTX DKT/IPT Telephone     11/03
DADM
Digital add-on Modules (DADM) can be connected to 3000-, IPT, and 2000-series 
telephones to provide additional buttons. Certain models are not interchangeable.
The DADM3120 works with the DKT3000-series telephones and the IPT1020-SD. 
The DADM3020 works with 3000-series telephones only and the 2000-series 
telephone requires a 2000-series DADM.
The DADM3020 model, is shown below, right. The DADM2020 (not shown) looks 
similar and has...

DADM/DSS Console
DSS Console
Strata CTX DKT/IPT Telephone     11/0383
DSS Console
The Direct Station Selection (DSS) console 
operates alongside of a digital telephone to 
provide 60 additional buttons. The 3000-
series telephone requires a 3000-series DSS; 
the 2000-series telephone requires a 2000-
series DSS. A DDSS3060 example is shown 
right. The DDSS2060 (not shown) looks 
similar and has the same button/LED 
functions.
NoteThe IPT1020-SD does not support a 
DSS console.
The 60 flexible feature...

DADM/DSS Console
DSS Console
84Strata CTX DKT/IPT Telephone     11/03
Calling a Station
➤To call a station’s extension from either a DSS console or a DADM, press the DSS 
associated with the station. 
A station call with a DSS button can be made on-hook or off-hook, and with Voice 
First or Tone signaling. After pressing the button, treat the call like any other 
station call made from a digital telephone. 
DSS LEDs indicate whether the associated station is idle or busy. The LED is 
steady red if the...

DADM/DSS Console
DSS Console
Strata CTX DKT/IPT Telephone     11/0385
Call Transfer with Camp-on
You can transfer a call to a busy station from either a DSS console or an DADM. Use 
the DSS to transfer the call, even though the DSS LED associated with the station you 
are “transferring to” is red.
➤To transfer call to a busy station
1. Press DSS corresponding to the busy station to be called.
You may hear a busy tone. The original caller is placed automatically on hold. The 
Line or extension LED flashes...

DADM/DSS Console
DSS Console
86Strata CTX DKT/IPT Telephone     11/03
Paging
You can make an announcement page to a group of telephone speakers selected in 
system programming with 

!
 on the DSS console. . (if programmed) 
on either the DSS console or the DADM can be used for page announcements. See 
“All Call Page” on page 52.
Call Forward Override (DSS Override)
Either the DSS buttons on your DSS console or the associated telephone can be set in 
system programming to ring stations that...