Toshiba C70b User Guide
Have a look at the manual Toshiba C70b User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
61Getting Started Using external display devices Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: 1Read the directions that came with the monitor to see if you first need to install new software. 2Connect the monitor’s video cable to the RGB (monitor) port on the side of the computer. 3Connect the device’s power cable to a live electrical outlet. 4Turn on the external device. Your computer will automatically detect the external display device. You can change the display settings by pressing the () + P keys, or by configuring the display properties settings. Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. Some modes are only available with the appropriate device attached and turned on. The quickest way to change the display output settings is to use the ( ) + P keys: Press the ( ) + P keys repeatedly until the setting you want takes effect. Briefly pause each time you press the ( ) + P keys to allow time for the display to change. This cycles through the settings in the following order (the last two options are available if an external monitor is connected): ❖PC screen only ❖Duplicate ❖Extend NOTE NOTE
62Getting Started Customizing your computer’s settings ❖Second screen only (Sample Image) Display options window The ( ) + P keys navigate through the options without activating a selection. Press ENTER to activate a selection. You may also use the F4 key, and then press ENTER to activate a selection. Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps. Customizing your computer’s settings There are several ways in which you can customize your computer to suit your particular requirements. You can go into your computer settings to make adjustments to your computer to suit your needs. NOTE NOTE
63Getting Started Caring for your computer From the Start or Desktop screen, move your pointer to the upper-right corner of the screen or swipe in from the right edge. When the Windows ® charms appear, click or touch the Settings ( ) charm, and then click or touch Change PC Settings . Then choose a category you wish to change. Refer to your operating system documentation or Help and Support for details. You may also wish to customize your power usage settings. For more information, see “Power Plans” on page 84. There are additional custom settings you can choose. See “Utilities” on page 104. Caring for your computer This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s battery, see “Taking care of your battery” on page 89. Please handle your computer carefully to avoid scratching or damaging the surface. Cleaning the computer Keep liquids, including cleaning fluid, out of the computer’s keyboard, speaker, and other openings. Never spray cleaner directly onto the computer and/or display. Never use harsh or caustic chemical products to clean the computer. To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Moving the computer Before moving your computer, even across the room, make sure all drive activity has ended (the internal storage drive and optical disc drive indicator lights stop glowing) and all external peripheral cables are disconnected. Do not pick up the computer by its display panel or by the back. Doing so could damage the system. NOTE
64Getting Started Caring for your computer Using a computer lock You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: 1Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. 2Pass the locking end through the loop. 3Insert the cable’s locking end into the security lock slot on your computer, then engage the locking device. The computer is now securely locked. (Sample Illustration) Attaching security lock cable
65 Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved. See “Saving your work” on page 71 for further information. HINT: Some programs have an automatic save feature that can be activated. This feature saves your file to the internal storage drive at preset intervals. See your software documentation for details.
66Learning the Basics Using the keyboard ❖Back up your files to external media on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy. For more information, see “Data and system configuration backup in the Windows® operating system” on page 136. ❖Use Error-checking and Disk Defragmenter regularly to check and optimize disk space and improve performance. ❖Scan all new files for viruses. This precaution is especially important for files you receive via external media, email, or download from the Internet. ❖Take frequent breaks to avoid repetitive-motion injuries and eyestrain. ❖Do not turn off the computer if a drive indicator light indicates a drive is active. Turning off the computer while it is reading from or writing to a disk may damage the disk, the drive, or both. The Windows® operating system records information, such as your desktop setup, during its shutdown procedure. If you do not let the Windows ® operating system shut down normally, details such as new icon positions may be lost. Using the keyboard Your computer may be equipped with a 10-key keyboard, depending on your model. Your computer’s keyboard contains character keys, control keys, function keys, and special Windows ® keys. NOTE NOTE
67Learning the Basics Using the keyboard (Sample Illustration) Keyboard (Sample Illustration) 10-key keyboard (Available on certain models) To capture a print screen of the entire screen, press the Fn + PRTSC key. (This only applies to models with a 10-key keypad.) To capture only the active window displayed, press Fn + ALT while simultaneously pressing the PRTSC key. (Sample Illustration) PRTSC key on the 10-key keyboard Function keys The function keys (not to be confused with the Fn key) are the 12 keys at the top of the keyboard. (Sample Illustration) Function keys NOTE
68Learning the Basics Touch screen F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, function keys marked with icons execute specific functions on the computer. For example, F5 turns the touch pad ON/OFF. For more information, see “TOSHIBA Function Keys” on page 143. Special Windows® keys (Sample Illustration) Special Windows® keys Your computer’s keyboard has one key and one button that have special functions in Windows®: ❖ Windows® key—Toggles between the Desktop screen and the last app opened on the Start screen. For more information refer to Help & Support, or see “Exploring the Start screen” on page 93 ❖ Application key—Has a similar function as the secondary mouse button Touch screen (Available on certain models.) Your computer may come with a touch screen, enabling direct interaction with displayed apps and programs through simple or multi-touch gestures. Touch screen navigation Use your finger to manipulate the on-screen icons, buttons, menu items, and other items on the touch screen. You can also change the screen’s orientation. The screen is made of glass so avoid contact with sharp, rough, or abrasive objects or substances as screen may break or scratch if not handled properly. If you see a crack in the glass, discontinue use of the device to avoid injury. Application key Windows ® key
69Learning the Basics Mouse properties To u c h—Touch to activate items displayed on the screen, such as app and setting icons or on-screen buttons. Touch to type using the keyboard. Touch & hold—Touch and hold an item on the screen by touching and holding the item in place until an action occurs. Drag—Touch and hold an item for a moment and then, without lifting your finger, move the item until you reach the target position. For example, drag items on any app screen to reposition them. Swipe or slide—To swipe or slide, quickly move your finger across the surface of the screen without pausing. For example, swipe your finger to the left from the right edge of the screen to display the Windows ® charms. Double-tap—Tap quickly twice to zoom in. For example, double-tap a section of a Web page to zoom in on that section. Double-tap again to zoom out. Pinch—In some apps (such as Maps and Games), you can zoom in and out by placing two fingers on the screen at once and pinching them together (to zoom out) or spreading them apart (to zoom in). Rotate—Place two or more fingers on an item and rotate your hand. The item rotates in the direction you turn your hand. (Not functional in all apps). Mouse properties Mouse properties allow you to change your pointing device or mouse settings. To access Mouse properties: 1If you are in the Desktop, press the Windows® ( ) key to display the Start screen. Click or touch the Search ( ) icon at the upper-right corner of the screen and, in the Search field, type Mouse. In the list that appears, click or touch your selection. The Mouse screen appears. 2Adjust the settings as desired, and then click or touch OK.
70Learning the Basics Starting an app Starting an app To Start an app on the Start screen, move your pointer over the appropriate app tile and click or touch to open. To Start an app from the Desktop, move your pointer to the upper-right corner of the screen or swipe in from the right edge. When the Windows ® charms slide out from the right, click or touch the Start ( ) charm, and then click or touch the appropriate app tile to open. Starting an app from the Start screen To start an app on the Start screen, move your pointer over the appropriate tile and click or touch to open. Swipe your finger to the left or right to reveal more available tiles. To search for an app using the Apps page, click or touch the Down arrow ( ) icon in the lower-left corner of the Start screen. The Apps screen appears with the available system apps to choose from, or you can enter your search in the search field. (Sample Image) Searching for apps To return the Start screen, click or touch the Up arrow ( ) icon in the lower-left corner of the screen. NOTE