Toshiba B Ex4 User Guide

2.PRINTER SETUP ENGLISH VERSION EO1-33089 2.10 Threshold Setting
 
E2-67  
2.10 Threshold Setting 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
To maintain a constant print position  the printer uses the media sensor to 
detect a print start position according to the difference of voltage between 
a print area and a gap or black mark.  When the media is pre-printed, the 
darker (or more dense) inks can inte rfere with this process causing paper 
jam errors. 
To get around this problem, first, try an automatic...

2.PRINTER SETUP ENGLISH VERSION EO1-33089 2.10 Threshold Setting
 
E2-68  
2.10 Threshold Setting  (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 Display example  Explanation 
1 
 
Result: OK (Mid.) 
Threshold is at the midpoint between the 
peak and the baseline. 
2 
 
Result: OK (High) 
Threshold is near the peak voltage. 
Adjusting the threshold to the midpoint 
between the peak and  the baseline enables 
more accurate detection.  
3 
 
Result: OK (Low) 
Threshold is near the baseline voltage....

2.PRINTER SETUP ENGLISH VERSION EO1-33089 2.11 Sensor Setting
 
E2-69  
2.11  Sensor Setting  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  If a paper jam error still occurs even
 after a threshold setting has been 
performed, register the voltage level of media to the media sensor.   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Contents of the Sensor Adjust Menu  
Menu Parameter 
TEMPERATURE  Displays the ambient temperature and  print head temperature....

2.PRINTER SETUP ENGLISH VERSION EO1-33089 2.11 Sensor Setting
 
E2-70  
2.11 Sensor Setting  (Cont.) 
 
 (1) REFLECT 
  1.  Select “REFLECT” from the Sensor Adjust menu. 
  2.  Place the tag paper to be used  on the reflective sensor so that the 
sensor can detect a print area. 
  3.  Hold down the [ENTER] for 3 seconds or more. 
  4.  When registration of the “print area level” is completed, “Adjust 
Complete” is displayed and an asterisk is shown on the right side 
of the voltage.  
 
 
(2) TRANS....

3. ON LINE MODE ENGLISH VERSION EO1-33089 3.1 Key Functions 
 
E3- 1 
3.  ON LINE MODE
 
 
 
 
3.1 Key Functions   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
This chapter describes usage of the ke ys on the Operation Panel in On 
Line mode.  
When the printer is in On Line mode and connected to a host computer, 
the normal operation of printing im ages on labels or tags can be 
accomplished.  
 
 
 
„  Key functions in the online mode 
 
Key Function 
(1)  Feeds one piece of paper.  
(2)  Prints...

3. ON LINE MODE ENGLISH VERSION EO1-33089 3.2 LCD 
E3- 2 
3.2 LCD 
 
 
 
 
 Online state 
 
 
 
 
 
 
 
Error state 
 
 
 
 
 
 
 
No. Description 
(1)  Model name and firmware version 
(2) Message 
(3)  The number of labels printed 
(4)  IP address (only when LAN/WLAN is enabled.) 
(5)  Radio intensity (only when WLAN is enabled.) Indicates the radio intensity in 4 levels. 
(6)  WLAN connection (only when WLAN is enabled.) ▪ Lights up when connecting to an access point. 
▪  Flashes while roaming. 
▪...

3. ON LINE MODE ENGLISH VERSION EO1-33089 3.3 Operation Example 
E3- 3 
3.3 Operation Example 
„ Online Mode 
   
 
 
 
   
  
Idling or normal issuing 
  
 
 Printing is stopped. 
 
   
 
 Help guide is displayed. 
   
  
 
Help guide message for head open  
 
   
 Printing is stopped and 
Help guide is displayed.  
 
  
 
Help guide message for no paper 
 
If the print head is 
opened during idling: 
If an error occurs 
while 
printing:  
When [PAUSE] key is 
pressed while printing: 
When [RESTART]...

3. ON LINE MODE ENGLISH VERSION EO1-33089 3.3 Operation Example 
E3- 4 
3.3  Operation Example (Cont.) 
„ Help Guide Message 
 
  
Idling or normal issuing    
 
   
 
Printing is stopped and 
Help guide is displayed.    
  
 
Cause of the error 
 
  
 
Troubleshooting 
 
  
 
How to restore to online 
 
If an error occurs 
while 
printing:  
Load media. 
When [RESTART] key is pressed, the 
printer resumes printing if there is 
remaining data. 
[RIGHT] or [ENTER]
[RIGHT] or 
[ENTER] 
[RIGHT] or 
[ENTER]...

3. ON LINE MODE ENGLISH VERSION EO1-33089 3.3 Operation Example 
E3- 5 
3.3  Operation Example (Cont.) 
„ Cancellation of Print Job 
 
 
 
 
 
  
Idling or normal issuing 
  
 
  
 
   
 
 
 
   
If an error occurs while 
printing: When [PAUSE] key is 
pressed while printing: 
Hold down [CANCEL] for 3 sec. or more.
Hold down [CANCEL] for 3 sec. or more.
While [CANCEL] is held down, 
the received data is discarded. 
(Quick reset) 

4. MAINTENANCE ENGLISH VERSION EO1-33089 4.1 Cleaning
 
E4- 1 
4. MAINTENANCE
 
 
 
 
 
 
 
 
 
 
 
 
 
4.1 Cleaning 
 
 
 
4.1.1 Print Head/Platen/
 Sensors 
 
 
 
 
 
 
 
 
 
 
This chapter describes how to pe rform routine maintenance.  
To ensure the continuous high qualit y operation of the printer, you should 
perform a regular maintenance routine.  For high throughput it should be 
done on a daily basis.  For low throughput it should be done on a weekly 
basis. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
To...