TomTom Via 16 2 Reference Manual

81 
 
 
 
Tip: If there is not enough space on your memory card or your card is not formatted correctly, 
you get on-screen help to fix the problem. 
5. When you see a message that your tracks have been exported successfully, remove your memory 
card to share your tracks with other users. 
Note: Each exported route is saved as a GPX file in the TomTom Routes folder on your 
memory card. 
 
Importación de rutas y recorridos desde una tarjeta de memoria 
Puede importar dos tipos de archivo de una tarjeta...

82 
 
 
 
About voice control 
Note: Voice control is not supported on all devices or in all languages. 
Instead of selecting items on the screen to control your TomTom VIA, you can use your voice to 
control your VIA. 
You can use voice control to control many of the navigation features on your VIA, or to change 
settings. For example, you can change the screen to day colours, avoid a blocked road or decrease 
the volume just by using your voice. 
Voice control is active in the map view, the guidance...

83 
 
 
 
 Orange means your phrase might work. 
 Green means your phrase is good. 
4. Select Hear it to listen to your wake-up phrase. 
5. Select Done then Yes to save your wake-up phrase. 
Your new wake-up phrase is ready to use. Start Voice Control and try it.  
The voice control screen 
 
1. Examples of what you can say.  
Tip: Say All commands to see a list of commands you can say. Alternatively, select Help in 
the Main menu, then select Voice control and then select Which commands can I say?....

84 
 
 
 
Some tips for using voice control 
You can help your VIA understand what you are saying by following these tips: 
 Mount your VIA about an arms length in front of you, away from speakers or air vents. 
 Reduce background noise such as voices or the radio. If there is excessive road noise, you may 
need to speak in the direction of the microphone. 
 Speak fluently and naturally as though speaking to a friend. 
 When saying an address, try not to pause between parts of the address or add...

85 
 
 
 
Saying commands in different ways 
Your VIA recognises many more words than just the ones you see in the list of commands, so try 
some of your own words. You can say other words that have the same meaning, for example you can 
say the following words: 
 OK, Correct or Right instead of Yes when you want to confirm what you said. 
 Navigate to, Look for or Nearest instead of Drive to when you want to drive to a petrol 
station. 
 Cancel or Delete instead of Clear when you want to clear your...

86 
 
 
 
The voice control screen is shown and your VIA says Im listening. When voice control is ready 
to listen, you see a microphone icon in the bottom left corner and you hear a beep. 
 
2. Say the command Drive home. 
Tip: Say All commands to see a list of commands you can say. Alternatively, select Help in 
the Main menu, then select Voice control and then select Which commands can I say?. 
For some commands, your VIA repeats what you say and asks for confirmation. 
3. If the command is correct,...

87 
 
 
 
3. If the command is correct, say Yes. 
If the command is incorrect, say No and repeat the command after you hear Im listening. 
The volume on your VIA changes to 50%. 
Tip: To stop voice control, say Cancel. To go back one step, say Back.  

88 
 
 
 
About Map Share 
You can report map changes using Map Share. These map changes are then shared with other 
TomTom device users when they receive a map update. 
There are two ways to report a map change: 
 Select a location on the map and create the change report immediately. 
 Mark a location and create the change report later. 
Your map change reports are automatically sent to TomTom in real time or when you connect your 
device to MyDrive Connect using a USB connection. 
All map changes are...

89 
 
 
 
Note: If you want to report a map change of a type not shown in the menu, use the Map Share 
Reporter at tomtom.com. 
 
5. Follow the instructions for your chosen type of map change. 
6. Select Report. 
Your map change report is sent to TomTom in real time or when you connect your device to 
MyDrive Connect using a USB connection. You receive map changes from other TomTom users as 
part of map updates. 
Tip: If you have a smartphone-connected device, reports are sent when your device is con-...

90 
 
 
 
5. Select Report Map Error from the pop-up menu. 
6. Select the type of map change you want to apply. 
Note: If you want to report a map change of a type not shown in the menu, use the Map Share 
Reporter at tomtom.com. 
7. Follow the instructions for your chosen type of map change. 
8. Select Report. 
The marker for the marked location is removed from the map. 
Your map change report is sent to TomTom in real time or when you connect your device to 
MyDrive Connect using a USB connection. You...