TomTom Mazda Nb1 6g Reference Guide

21 
 
 
 
About radio unit settings 
Some settings for the navigation device can be accessed from the radio unit (head unit). These are 
described below. 
All settings for the navigation device can be changed in the Settings menu in the application. For 
more information see the online Mazda Navigation System NB1 Reference Guide. 
Note: To prevent damage, do not press the screen hard or press it with a sharp or pointed 
object.  
 
1. Audio button. 
2. Phone button. 
3. Navigation button (NAV button)....

22 
 
 
 
Note that you can set the volume to be very low on the radio and very high on the navigation 
device and you won’t hear sounds. Hence we recommend you use only one method to change 
the volume.  
If you hear no sound or low sound, check the volume on the navigation device. If that is not set to 
a low volume, turn the volume dial on the radio while a navigation instruction is playing. You can 
tap the centre section of the status bar on the Driving View to repeat the last spoken instruction....

23 
 
 
 
 
 
1. Talk button. 
2. Start call button. 
3. End call button. 
4. + and - buttons. 
When you hear spoken instructions, press + to increase the volume or press or - to 
decrease the volume. 
5. Nav button. 
To hear spoken instructions, press the NAV button on the navigation device or on the 
commander.  
Steering wheel buttons  

24 
 
 
 
For support on your navigation device’s functionality, call TomTom Customer Support. Go to 
tomtom.com/support (see tomtom.com - http://www.tomtom.com) for more information on how 
to get in touch with TomTom customer-care.  
For support on features related to the radio or phone functionality, check the corresponding guide. 
Here is a list of frequently asked questions and answers: 
Common issues 
Symptoms Cause Solution 
No navigation voice or 
sound. 
The volume is too low or is set to 
0....

25 
 
 
 
Map does not scroll by 
dragging the screen. 
You are not using the map 
viewer. 
On your Mazda NB1, select View 
map or View route in the Main 
Menu. 
Map does not move when 
you are driving the 
vehicle. 
You are using the map viewer. On your Mazda NB1, select Done to 
go back to the Driving View. 
Navigation error Route 
cannot be found. 
The Mazda NB1 tried to plan a 
route to a destination not 
connected to land without using 
a ferry or toll road. 
Select Planning settings in the...

26 
 
 
 
Voice control 
Symptoms Cause Solution 
Voice command is not 
recognised. 
Trying to speak navigation 
commands when a hands-free 
box is installed. 
When voice control starts, say 
Navigation. Then say your 
navigation command when 
prompted.  
 
 
 
 
 
 
Someone else is speaking at the 
same time as you. 
If other people talk when you say 
voice commands, the commands 
may not be recognised. Try to say 
voice commands when no-one else 
is talking. 
The speech voice level is low or...

27 
 
 
 
Driving View goes grey. GPS signal has been lost 
temporarily. 
Wait for the GPS signal to be 
restored. If anything is obstructing 
GPS reception, for example, a high 
building, move away from it. Remove 
any obstructions on the dashboard. 
 
 
GPS signal cannot be 
received after starting the 
car and the Mazda NB1. 
When you first start your Mazda 
NB1 navigation device, the 
device may need a few minutes 
to determine your GPS position 
and show your current position 
on the map.  
Wait...

28 
 
 
 
Important Safety Notices and Warnings 
Global Positioning System 
The Global Positioning System (GPS) is a satellite-based system that provides location and timing 
information around the globe. GPS is operated and controlled under the sole responsibility of the 
Government of the United States of America which is responsible for its availability and accuracy. 
Any changes in GPS availability and accuracy, or in environmental conditions, may impact the 
operation of this device. TomTom does not...

29 
 
 
 
This device has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that 
interference...

30 
 
 
 
Exposure limits 
This device complies with radiation exposure limits set forth for an uncontrolled environment. In 
order to avoid the possibility of exceeding the radio frequency exposure limits, human proximity 
to the antenna shall not be less than 20cm (8 inches) during normal operation.  
CE marking 
This equipment complies with the requirements for CE marking when used in a residential, 
commercial, vehicular or light industrial environment, achieving all the appropriate provisions of...