TomTom Gps Watch Spark User Manual
Here you can view all the pages of manual TomTom Gps Watch Spark User Manual. The TomTom manuals for GPS Receiver are available online for free. You can easily download all the documents as PDF.
Page 11
11 1. Slide the handlebar strap into the hook at the back of the watch holder. Choose the right length for the size of your handlebars. Tip: The strap has two holes so that it fits a range of different sizes of handlebars from 22 mm to 32 mm. Select the hole that fits your handlebars best.
Page 12
12 2. Place the watch holder on your handlebar and wrap the strap around the bar. 3. Use the clip on the bottom of the holder to attach the handlebar strap. The strap should now be attached securely around the handlebar.
Page 13
13 4. Remove your watch from the wrist strap. Open the holder by pressing as shown below. Lift the cover. 5. Slide your watch into the holder as shown. 6. Make sure your watch clicks securely into place.
Page 14
14 7. Close the holder over the top of the watch, ensuring that it clicks as you close it. You are now ready to go cycling! Removing your watch from the holder You may want to remove your watch from the holder in order to charge it or while attaching the bike mount to your handlebars. To remove the watch from the holder, do the following: 1. Open the holder by pressing as shown below and then lift the cover. 2. Push the watch back towards you to unlock it from the holder.
Page 15
15 3. Slide the watch out towards you into the palm of your hand. Using an O-ring If you lose your bike mount strap, you can use a standard O-ring to mount your watch on your handlebars. To use an O-ring, do the following: 1. Turn the watch over and insert the O-ring in the hook nearest the front of the watch. 2. Find a piece of rubber, for example, a piece of an old bicycle inner tube. This is needed to sit between the mount and handle bars and prevents slipping. 3. Place the mount...
Page 16
16 About screen From the clock screen, press DOWN to open the About screen. The About screen shows the following information: BATTERY - the battery power left on your watch. To charge the battery, place the watch in the desk dock and connect the dock to your comput- er. STORAGE - the amount of free space available on your watch. If you are running out of space, connect your watch to your computer. TomTom MySports Connect transfers the workouts or activities to your computer....
Page 17
17 Performing a reset Soft reset A soft reset is performed each time you disconnect your TomTom GPS watch from a wall charger or computer. To perform a soft reset on your watch, follow these steps: 1. Connect your watch to a wall charger or computer. Wait until your watch shows a battery symbol. If you are using a computer, wait until MySports Connect finishes updating your watch. 2. Disconnect your watch from the wall charger or computer. The software on your watch restarts. This...
Page 18
18 MySports Connect installs the software on your watch. 5. Keep your watch connected when the window for MySports Connect opens again. 6. Follow the instructions in MySports Connect to setup your watch.
Page 19
19 About activity tracking You can use your TomTom GPS watch to track how active you are. Here are some of things you can do: Track steps, time spent being physically active, calories burned and distance moved. Set a daily goal for one of these metrics on your watch. Use a weekly goal that is automatically generated based on your daily goal multiplied by 7. See your daily and weekly progress for your set goal. Upload your activity tracking metrics to the TomTom MySports website...
Page 20
20 Monitoring your activity To see how active you have been, do the following: 1. From the Clock screen, press LEFT to see how you are progressing towards your goal. 2. Press UP or DOWN to see distance, time, or calories, depending on the goals you have set. 3. To see steps per week, press LEFT again. 4. Press RIGHT twice to go back to the Clock screen.