Timex Intelligent Quartz All Models User Manual

7677
date to your local date, continue rotating the crown to 
position the hands to the current local time, being mindful 
of am/pm. Once the time is set, push the crown back in 
to the closed position. In normal operation the 4th center 
hand will display the date when the crown is pushed. 
The hand will travel to the position of the current date as 
shown on the top ring of the case. The hand will pause 
for you to be able to read the date and then return back 
to the 12 o’clock resting position....

7879
MODE SELECTION
Press button C to advance the upper hand to the desired 
function.
TIME: 
Displays the current time only (Perfect Date function will 
operate only in the Time mode).
YACHT RACE TIMER 5: 
The countdown timer will start at 5 minutes and begin the 
chronograph once it reaches zero.
YACHT RACE TIMER 3: 
The countdown timer will start at 3 minutes and begin the 
chronograph once it reaches zero.
YACHT RACE TIMER 1: 
The countdown timer will start at 1 minute and begin the 
chronograph once...

8081
the countdown process. (Please note: button C is 
disabled until the countdown timer is reset).
4.  To reset, press and hold button B (SPLIT/RESET) for 
2 seconds, which will reset the countdown timer back 
to the originally selected 5, 3 or 1 minute duration.
In the normal operation of the Yacht Race Timer, once 
the countdown timer has reached zero, the chronograph 
will automatically start. There is also an audible alert as 
the countdown timer reaches each minute mark as well 
as when the final...

8283
3. To take a split time, press button B (SPLIT/RESET). 
The upper, lower, and 4th center hands will hold their 
positions for you to note the split (lap) time. The chro-
nograph is still maintaining the timing sequence while 
the hands are stopped. To release the hands, press 
button B (SPLIT/RESET) and the hands will quickly 
catch up to display the total elapsed time. 
4.  To stop, press button A (START/STOP) which will stop 
the chronograph. (Please note: button C is disabled 
while the...

8485
INDIGLO® NIGHT-LIGHT (PRO VERSION ONLY)
Yacht Racer PRO includes the addition of the INDIGLO® 
night-light feature. During low or no-light conditions the 
dial can easily be read by activating the INDIGLO
® night-
light function by pressing in the crown. The Yacht Racer 
PRO uses a special luminescent material on the dial which 
will glow and create an illumination bright enough to be 
able to read the dial, but ensures that your night vision is 
not reduced once the light has been extinguished....

8687
PERFECT DATE
With your watch’s Perfect Date™ feature, the date does 
not need adjustment until 2060. The watch automatically 
accounts for short months and leap years, and will always 
display the correct date upon demand. The date was 
preset at the Timex factory. When initially starting your 
new watch, if the date displays the date before or behind 
the date in your location, you will need to revise the date 
for your local date. Pull the crown out to the outer position. 
The 4th center hand will...

8889
4TH CENTER HAND ADJUSTMENT
To readjust a misaligned 4th center hand:
1. Pull the crown out to position 3. The upper and lower 
hands reset to the ends of their sweeps automatically.
2.  When it stops moving, the 4th center hand should 
point to 12 o’clock, if it does not point to 12 o’clock, 
press button A or B to move the hand counterclock-
wise or clockwise until it points to 12 o’clock. Pressing 
and holding button A or B will make the hand move at 
a fast rate. Please note: after 5 seconds...

9091
2. To start, press button A (START/STOP). The 4th center 
hand displays the seconds counting up; the lower 
hand shows the minutes, counting up in a 30-minute 
scale and the upper hand shows the hour counting up 
on the 4-hour scale. Each time the lower hand reaches 
the 30 minute mark, it will return to the zero position 
to begin the next 30 minute period, while the upper 
hand will continue to advance through the 4-hour 
scale. (Please note: button C is disabled while the 
chronograph is in...

9293
will need to be reset prior to using the chronograph func-
tion again or before changing to a different mode. (Please 
note: button A is disabled when the maximum four hour 
time has elapsed and will not function until the chrono-
graph has been reset by pressing button B).
COUNT-DOWN TIMER 
The watch provides a count-down timer function.
Special note: The upper hand, lower hand, and 4th 
center hand are united during steps 3, 4 and 5 below. As 
you move the minute and second hands forward/back-...

9495
set, the hand will point to the time previously set. If 
this is the first time the timer is being set, it will point 
to the 0 on the timer scale. 
2.  Pull the crown out to the middle position.
3.  To set the desired number of hours in half hour incre-
ments (up to the maximum time of 4:00:00), press 
button A to move the upper hand counterclockwise 
(pressing button B will move this hand clockwise), 
until the desired number of hours has been selected. 
Please note that you are selecting the...