Timex Cycle Trainer 20 GPS User Manual

NA/EU  W280  242-095004
Cycle Trainer™ 2.0
QUICK
START
GUIDE
GPS
W280_NA_EU_BOOK.indb   2-31/19/12   9:15 AM 

Table of Contents
Get Started Using Your Cycle Trainer
™ .................................................................. 4
Charge the Cycle Trainer ........................................................................\
............... 5
Basic Operation ........................................................................\
............................. 6
Button Functions ........................................................................\
........................... 7
Icon Descriptions...

45
ChArGE ThE CyClE TrAINErBefore you use the Cycle Trainer™ computer for the first time, charge the battery 
for at least 4 hours.
Plug the large end of the USB cable into a powered USB port on your comp\
uter, 
and plug the small end into the port on the back of the device covered b\
y the 
rubber cap. 
A fully charged battery will run for 
18 hours in full GPS mode.GET STArTED USING  yoUr CyClE TrAINEr™ Timex Cycle Trainer™ 2.0 bike computer adds a dashboard to your handlebars. 
Five screens of...

67
BUTToN FUNCTIoNSBACk/  
Hold for 2 seconds to turn the Cycle Trainer™ computer on or off. Press to turn 
the night-light on or off. In menus, press to go back to the previous page.
 /ENTEr 
Press to cycle through screens in Speedometer mode. Hold to enter the main 
menus. In menus, press 
 /ENTER to select the highlighted choice. 
p/STArT/ST oP 
Press to highlight the previous item in a list. Press to start or stop the timer in 
Speedometer mode. Press to zoom out in Map mode. 
lAP/rESET/ q 
Press to...

89
ICoN DESCrIPTIoNSThese icons can appear on the Time and menu screens. 
  GPS status Solid: GPS has a satellite fix. More bars indicate a stronger signal. 
Blinking: GPS is seeking a satellite fix. 
   Timer Solid: Timer is running. 
Blinking: Timer is stopped, but has not been reset. 
   Cadence 
sensor Solid: Device is receiving data from a cadence sensor. 
Blinking: Device is searching for a cadence sensor. 
   Alarm An alarm is set and will sound at the specified time. 
   Heart rate 
sensor Solid:...

1011
2. Highlight SET SYSTEM, then press ENTER.
3.  Highlight DISPLAY, then press ENTER.
4.  Highlight UNITS, then press ENTER.
5.  Highlight the UNIT or COORDINATION field, then press ENTER.
6.  Highlight the units to display, then press ENTER. 
SET UP  yoUr USEr ProFIlEEnter your name, gender, birth date, height, and weight to ensure accurate 
heart rate zone and calorie calculations. 
1.    Press and hold ENTER to bring up the Main Menu. Highlight 
CONFIGURATION, then press ENTER.
2.  Highlight USER...

1213
CoNNECT ThE hEArT rATE SENSor T o ThE CyClE TrAINEr™ 1.   Make sure you are at least 30 feet away from other heart 
rate sensors.
2.    Wet the heart rate sensor pads, and fasten the sensor firmly 
to your chest, just below your sternum. 
3.     Press and hold ENTER to bring up the Main Menu. Highlight 
CONFIGURATION, then press ENTER.
4.  Highlight ACCESSORIES, then press ENTER.
5.  Highlight SENSORS, then press ENTER.
6.  Highlight HEART RATE, then press ENTER.
7.  Highlight SCAN, then press...

1415
reset the timer and save the ride. 
5.  Highlight CONFIRM?, then press ENTER.
rEvIEWING rIDESEvery time you reset the timer in Speedometer mode (and in the Trainer 
Function, if you chose to record data), the ride is saved. You can view it from the 
ACTIVITY INFO screens. Compare these saved rides against one another to track 
your progress, or follow the routes of your favorite rides on the map.
ChooSING  rIDES AND vIEWING D ATAView the list of rides from the ACTIVITY INFO screen, and select a ride...

16
INSTAllING ThE TImEx® DEvICE AGENTThe Device Agent is software that runs on your computer. It allows you to 
connect the Cycle Trainer™ device to your computer so you can upgrade 
firmware, customize settings and download workouts.
1.    In a Web browser, navigate to www.timexironman.com/deviceagent
2.  Click the download link for the Cycle Trainer
™ 2.0.
3.  Follow the prompts to install the Device Agent.
See Uploading Rides to Training Peaks in the Online User Manual for more 
information on this.
W...

1819
Please note that Timex may, at its option, repair your Timex® product by 
installing new or thoroughly reconditioned and inspected components or 
replace it with an identical or similar model.
ImPorTANT: PLEASE NOTE THAT THIS WARRANTY DOES NOT COVER DEFECTS 
OR DAMAGES TO YOUR PRODUCT:  
1.  after the warranty period expires;
2.     if the product was not originally purchased from an authorized Timex retailer;
3.   from repair services not performed by Timex;
4.  from accidents, tampering or abuse;...