ThermovisionFLIR DSeries Installation and Operation Manual

427-9030-01-12 Rev130 Mar 2014 3-11
3Advanced Configuration
On the Files page under PelcoD Map, use the Download link to open the text file that is used for 
mapping the functions to Aux commands and Presets. If it is necessary to change the mapped 
functions, edit the file and upload the new map file to the camera using the Upload button. Once a file 
has been edited and tested, it can also be uploaded to other cameras so that each camera operates 
the same way.
3.5Remote/VMS (ONVIF Interface)
Several...

3-12 427-9030-01-12 Rev 130 Mar 2014
3Advanced Configuration
3.6 Video Stream Parameters
From the Maintenance menu, it is 
possible to modify the video stream 
parameters by selecting the Sensor > 
Modules > Video page. Various 
parameters that affect both image 
quality and transmission bandwidth 
are available. 
By default, two video streams are 
enabled for the thermal (IR) camera 
(Video 0 and Video 1) and two for the 
daylight (DLTV) camera (Video 3 and 
Video 4). The Video 0 and Video 2 
streams...

427-9030-01-12 Rev130 Mar 2014 3-13
3Advanced Configuration
RTP Settings
According to the specification, RTP is 
originated and received on even port numbers 
and the associated RTCP communication 
uses the next higher odd port number; the 
default RTP Port is 554. The Stream Name is 
used when establishing a session from a 
client. The default value recognized by FSM 
for the first stream is ch0; the complete 
connection string is: 

rtsp://192.168.250.116/ch0. 
If necessary, this stream name can be...

3-14 427-9030-01-12 Rev 130 Mar 2014
3Advanced Configuration
Settings
The parameters in the Settings section will have a significant impact on the quality and bandwidth 
requirements of the video stream. In general it is recommended that the default values are used 
initially, and then individual parameters can be modified and tested incrementally to determine if the 
bandwidth and quality requirements are met. The proper settings for a given installation will depend 
on many factors, including the...

427-9030-01-12 Rev130 Mar 2014 3-15
3Advanced Configuration
Note, the image size for FC-Series cameras with 320 resolution is expanded to be equivalent to the 
image size for 640 cameras.
As a rule of thumb, if the video will be viewed on its own and on a reasonably large screen, a large 
image size setting may look better. On the other hand, if the video is shown as a tile in a video wall, a 
smaller image size may look as good and consume less bandwidth. 
MJPEG Codec Type
The video stream for the Live...

3-16 427-9030-01-12 Rev 130 Mar 2014
3Advanced Configuration
3.7 Configuration File 
The Configuration File web page allows the Nexus Server configuration to be displayed or backed up 
locally (on the camera). The configuration file can also be downloaded to another computer for 
backup, or a new configuration file can be uploaded from a computer to the camera. 
Shown at the top of the screen is the configuration script file in a scrollable window. This can be useful 
if you ever need help from a support...

427-9030-01-12 Rev130 Mar 2014 3-17
3Advanced Configuration
3.8 Restoring the Factory Settings
The camera comes configured from the factory with default settings for the IP address 
(192.168.250.116), the login password (fliradmin), and all of the other configuration parameters 
(stored in a file called server.ini). In some cases, it may be necessary to restore the settings of the 
camera to the original factory settings. If necessary, this can be accomplished by temporarily 
connecting a loopback device...

3-18 427-9030-01-12 Rev 130 Mar 2014
3Advanced Configuration
After the camera boots up, confirm the startup information is displayed on the analog monitor after 
approximately 90 seconds. For example:
S/N: 1234567
IP Addr: 192.168.250.116
PelcoD (Addr:1): 9600 SW 

3 Advanced Configuration
427-9030-01-12, version 130 Mar 2014 3-19 

Document: 
427-9030-01-12
Version: 130
Date: Mar 2014 FLIR Systems, Inc.
70 Castilian Drive
Goleta, CA 93117
USA
PH: + 1 805.964.9797
PH: + 1 877.773.3547 
(Sales)
PH: + 1 888.747.3547 
(Support)
FX: + 1 805.685.2711
www.flir.com
Corporate Headquarters
FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
PH: +1 503.498.3547
FX: +1 503.498.3153
[email protected]