Tenda Router W330R User Manual

							
 Wireless-N Broadband Router   
Static Route 
 
Static Route is set by 
administrator in advance 
is called static route. 
Usually, it is set according 
to network configuration 
when installing the 
operation system. It would 
not be changed according 
to network structure’s 
change.  
 
Destination LAN IP: The 
address of the remote host 
with which you want to 
construct a static route. 
 
Subnet Mask: The 
network portion of the 
Destination LAN IP. 
 
Gateway:  The gateway of 
the next hop. 
 
 
 
 
 
 
  76 
						

							
 Wireless-N Broadband Router   
Chapter 12: System Tools 
 
Time 
 
This section is to select 
the time zone for your 
location. If you turn off the 
Router, the settings for 
time disappear. However, 
the Router will 
automatically obtain the 
GMT time again once it 
has access to the Internet.
 
Time Zone: Select your 
time zone from the 
drop-down menu. 
 
Customized time: Enter 
the time you customize. 
 
 
 
 
 
 
 
 
 
 
DDNS 
 
The  DDNS (Dynamic 
Domain Name System)  is 
supported in this router. It  
 
 
  77 
						

							
 Wireless-N Broadband Router   
is to assign a fixed host 
and domain name to a 
dynamic Internet IP 
address, which is used to 
monitor hosting website, 
FTP server and so on 
behind the Router. If you 
want to activate this 
function, please select 
“Enable” and a DDNS 
service provider to sign 
up. 
 
DDNS: Click the radio 
button to enable or disable 
the DDNS service. 
 
Service Provider:  Select 
one from the drop-down 
 menu and press “Sign up” 
for registration. 
 
User Name:  Enter the 
user name the same as 
the registration name. 
 
Password:  Enter the 
 
 
 
 
 
 
 
 
 
 
78 
						

							
 Wireless-N Broadband Router   
password you set. 
 
Domain Name: Enter the 
domain name which is 
optional.    
 
 
Backup/Restore 
 
The device provides 
backup/restore settings, 
so you need set a 
directory to keep these 
parameters. 
 
Backup: Click this button 
to back up the Router’s 
configurations. 
 
Browse:  Click this button 
to browse the directory 
where you Back up or 
save files 
Restore:  Click this button 
to restore the Router’s 
configurations. 
 
 
 
 
 
 
 
  79 
						

							
 Wireless-N Broadband Router   
Firmware Upgrade 
 
The Router provides the 
firmware upgrade by 
clicking the “Upgrade” 
after browsing for the 
firmware upgrade packet 
which you can download 
from 
www.tenda.cn. After 
the upgrade is completed, 
the Router will reboot 
automatically. 
 
Browse:  Click this button 
to browse the directory 
where you download the 
firmware upgrade files. 
 
Upgrade:  Click this button 
to start upgrade. 
 
IMPORTANT:  
Do not power off the 
system during the 
firmware upgrade to 
avoid damaging the 
device. The Router 
will reboot after the 
upgrade.
 
 
 
 
 
 
 
 
 
 
80 
						

							
 Wireless-N Broadband Router   
Restore to Factory Default Settings 
 
This button is to reset all 
configurations to the 
default values. It means 
the Router will lose all the 
settings you have set. So 
please Note down the 
related settings if 
necessary. 
 
Restore to Factory 
Default Settings: Click 
this button to restore to 
default settings.   
 
Factory Default Settings: 
User Name:  admin 
Password: admin  
IP Address: 192.168.0.1 
Subnet Mask:  
255.255.255.0  
 
NOTE:  
After restoring to 
default settings, 
please restart the 
 
 
 
 
 
 
 
 
 
 
 
 
 
81 
						

							
 Wireless-N Broadband Router   
device, then the 
default settings can 
go into effect.
 
 
Reboot 
 
Rebooting the Router 
makes the settings 
configured go into effect or 
to set the Router again if 
setting failure happens. 
 
Reboot the router: Click 
this button to reboot the 
device. 
 
 
 
 
 
 
Change Password 
 
This section is to set a 
new user name and 
password to better secure 
your router and network. 
Please Note that the new 
password should be less 
than 14 characters.  
 
 
 
 
 
 
  82 
						

							
 Wireless-N Broadband Router   
User Name:  Enter a new 
user name for the device. 
 
Old Password:   Enter  the 
old password. 
 
New Password:   Enter a 
new password. 
 
Re-enter to Confirm:  
Re-enter to confirm the 
new password. 
 
NOTE: 
 It is highly 
recommended to 
change the 
password to secure 
your network and 
the Router.
 
 
 
 
 
 
 
 
 
  83 
						

							
 Wireless-N Broadband Router   
System Log 
 
The section is to view the 
system log. Click the 
“Refresh” to update the 
log. Click “Clear” to clear 
all shown information. If 
the log is over 150 
records, it will clear them 
automatically. 
 
Refresh: Click this button 
to update the log. 
 
Clear:  Click this button to 
clear the current shown 
log. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  84 
						

							
 Wireless-N Broadband Router   
Appendix A: Product Features 
 
◆    Integrates router, wireless access point, four-port Gigabit 
switch and firewall in one                                         
◆    Complies with IEEE802.11n (Draft 2.0), IEEE802.11b     
and IEEE802.11g standards                                      
◆    MIMO technology utilizes reflection signal to increase 8 
times transmission distance of original 802.11g standard 
and reduces the dead spots in the wireless coverage 
area                                                           
◆    Provides 300Mbps receiving rate and 300Mbps sending 
rate                                                            
◆    Supports WMM to make your voice and video more 
smooth                                                         
◆    Supports 64/128-bit WEP, WPA, WPA2 encryption   
methods and 802.1x securi ty authentication standard 
◆    Setup Wizard support for fast and easy configurations 
◆    WPS (PBC and PIN) encryption method to free you from 
    remembering long passwords                                     
◆  Supports remote/local Web management                           
◆    Supports wireless Roaming technology to ensure high- 
efficient wireless connections                                     
◆    Supports wireless SSID stealth mode and MAC address 
access control                                                  
◆  Supports Auto MDI/MDIX                                         
◆    Provides system log to record the status  of the router                
 
85