Tenda Router W330R User Manual

							
 Wireless-N Broadband Router   
Fragment Threshold: Do 
not modify default value if 
you don’t know what it is, 
default value is 2346. 
 
RTS Threshold:  Set the   
RTS threshold of wireless 
radio. Do not modify default 
value if you don’t know 
what it is, default value is 
2347. 
 
TX Power: You can set the output power of wireless 
radio. Unless you’re using 
this wireless router in a 
really big space, you may 
not have to set output 
power to 100%. This will 
enhance security (malicious 
/ unknown users in distance 
will not be able to reach 
your wireless router). 
 
WMM Capable:  It will 
enhance the data transfer 
performance of multimedia 
contents when they’re 
  46 
						

							
 Wireless-N Broadband Router   
being transferred over 
wireless network. If you 
don’t know what it is / not 
sure if you need it, it’s safe 
to set this option to 
‘Enable’, however, default 
value is enabling. 
 
APSD Capable: It is used 
for auto power-saved 
service. The default is 
disabled.  
  
 
Wireless Access Control 
 
To secure your wireless 
LAN, the wireless access 
control is actually based on 
the MAC address 
management. 
 
MAC Address Filter: 
you want to access the   
Router from any external IP Address, please select the 
“Disable”.  
 
MAC Address: To specify 
 
 
 
 
 
 
 
 
 
 
 
 
 
47 
						

							
 Wireless-N Broadband Router   
an external IP address, 
please add the MAC 
address manually and click 
“Add”. 
 
MAC Address List:  The 
added MAC addresses are 
listed here. Click   
“Delete” to delete the filter 
management for this MAC address.   
 
 
 
 
Wireless Connection Status 
 
This page is to show the 
current wireless access 
status. Click “Refresh” to 
update the wireless 
connection information. 
 
MAC Address: Shows the 
connecting PC’s MAC 
address.   
 
Bandwidth:  displays the 
channel bandwidth of the 
host to be connected.   
 
 
 
 
 
  48 
						

							
 Wireless-N Broadband Router   
Chapter 7: DHCP Server 
 
DHCP (Dynamic Host 
Control Protocol) is to 
assign an IP address to the 
computers on the LAN/ 
private network. When you 
enable the DHCP Server, 
the DHCP Server will 
allocate auto matically an 
unused IP address from the 
IP address pool to the 
requesting computer in 
premise of activating 
“Obtain an IP Address 
Automatically”. So 
specifying the starting and 
ending address of the IP 
Address pool is needed. 
 
DHCP Server:  Activate the 
checkbox to enable 
DHCP server. 
 
IP Address Start/End: 
Enter the range of IP 
address  for DHCP server 
distribution. 
 
Lease Time:  The length of 
the IP address lease. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  49 
						

							
 Wireless-N Broadband Router   
DHCP Server List 
 
The Static IP assignment 
is to add a specifically 
static IP address to the 
assigned MAC address. 
You can view the related 
information in the DHCP 
server list.   
 
IP Address:  Enter one IP 
address for the computer 
on the LAN network. 
 
MAC Address:   Enter the 
MAC address of the 
computer you want to 
assign the above IP 
address. Click “Add” to 
add the entry in the list. 
 
Hostname:    The name of 
the computer which   
 
Lease Time： The time 
length of the correspond —
—ding IP address lease. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  50 
						

							
 Wireless-N Broadband Router   
Chapter 8: Virtual Server 
 
Single Port Forwarding 
 
The W330R can be 
configured as a virtual 
server on behalf of local 
services behind the LAN 
port. The given remote 
requests will be 
re-directed to the local 
servers via the virtual 
server. This section deals 
with the single port 
forwarding mainly. The 
Single Port Forwarding 
allows you to set up kinds 
of public services such as 
web servers, ftp, e-mail 
and other specialized 
Internet applications on 
your network. 
 
NOTE:  
the virtual server 
uses known 
host-name or 
public IP address. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  51 
						

							
 Wireless-N Broadband Router   
External Port:   This is the 
external port number for 
server or Internet 
application, for example, 
port 21 for ftp    service.
 
Internal Port:    This is the 
port number of LAN 
computer set by the 
Router. The Internet traffic 
from the external   port will 
forward to the internal 
port.  
For example, you can set 
the internal port NO.66 to 
act as the external port 
NO.21 for ftp service. 
 
IP Address:   Enter the IP 
address of the PC where 
you want to set the 
applications. 
 
Protocol:  Select the 
protocol (TCP/UDP/Both) 
for the application. 
 
Well-Known Service   
  52 
						

							
 Wireless-N Broadband Router   
Port: Select the 
well-known services as 
DNS, FTP from the 
drop-down menu to add to 
the configured one above.
 
Delete/Enable: Click to 
check it for corresponding 
operation.   
 
NOTE:  
If you set the virtual 
server of the service 
port as 80, you must 
set the Web 
management port 
on Remote Web 
Management page 
to be any value 
except 80 such as 
8080. Otherwise, 
there will be a 
conflict to disable 
the virtual server.
 
 
 
53 
						

							
 Wireless-N Broadband Router   
 
This section deals with the 
port range forwarding 
mainly. The Port Range 
Forwarding allows you to 
set up a range of public 
services such as web 
servers, ftp, e-mail and 
other specialized Internet 
applications to an 
assigned IP address on 
your LAN. 
 
Start/End Port: Enter the 
start/end port number 
which ranges the External 
ports used to set the 
server or Internet 
applications. 
 
IP Address:  Enter the IP 
address of the PC where 
you want to set the 
applications. 
 
Protocol: Select the 
protocol (TCP/UDP/Both) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  54
Port Range Forwarding  
						

							
 Wireless-N Broadband Router   
for the application. 
 
Well-Known Service 
Port: Select the well- 
known services as DNS, 
FTP from the drop-down 
menu to add to the 
configured one above. 
 
Delete/Enable:Click to 
check it for corresponding 
operation.  
 
 
Port Trigger Settings 
 
When internal clients have 
access to external server 
in the Internet for some 
application, the clients 
request to connect with 
severs, and the server will 
also ask to connect with 
client. But in the default 
setting, router will refuse 
to accept any request from  
 
 
 
 
 
 
 
 
 
 
55