Tenda Router TEI480T User Manual
Have a look at the manual Tenda Router TEI480T User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 4 Tenda manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![](/img/blank.gif)
TEI480T/490T/4000 Enterprise & Net-bar Level Router z IP data Traffic and Rate: To display the data of visiting the router and visiting the external network. z Link Count: To display the Link Counts established by the IP z Operation: You can restrict or release this IP z Binding: To bind this IP with the MAC loaded. But the ARP Binding in IP-MAC binding should be enabled Notice: If you have not enabled the “Defense Network Attack” function in “Security Setting”, the data above would be caused to be not accurate. 4.3.5.2 Port Monitor z This page sets basic parameters of port monitor. The port monitor function can transmit data packet (transmission or receive + transmission data packet) of one or more ports monitored to the port for monitoring. ¾ Port monitor function: Enable or Disable Port Monitor Function 20
![](/img/blank.gif)
TEI480T/490T/4000 Enterprise & Net-bar Level Router ¾ Port for Monitoring: To collect the data packet of the ports being monitored ¾ Port Be Monitored: All the data pa ckets transmitted or received by this port are copied and send to the Port for Monitoring 4.3.5.3 VLAN ¾ In this section, you are able to c onfigure the basic parameters of VLAN function, this router supports VLAN (Port based VLAN).Only the ports set in the same VLAN group are able to communicate with each other. ¾ VLAN Mode Selecting: To choose the required mode according to the Notice. Notice: this function can be used in safe management of company data. 4.3.5.4 Bandwidth Control In this page, we will set the bandwidth of every LAN. We can distribute bandwidth reasonably based on the st ructure of LAN, for utilizing the networks resources sufficiently. 21
![](/img/blank.gif)
TEI480T/490T/4000 Enterprise & Net-bar Level Router z You are able to configure reasonable bandwidth for respective LAN port to control the download rate of each port, and able to utilizing the networks resources sufficiently If you don’t want to limit the bandwidth of a certain LAN port, then please configure it as “No Limit”. 4.3.5.5 LAN IP Control In this page you are able to set actual transmission bandwidth of every IP address segment in LAN, to contro l effectively bandwidth of every PC combined with flow statistics, to prevent the evilly intentionally seizing of the network resources through download tools like BT etc. and to equally distribute current flow of total network. z Upload speed and download range: 8K 、16、 32K、64K 、128K 、256K 、 512K 、1024 、2048K 、no limit z Connect Limit range: 0-999. “0” stands for No Limit 4.3.5.6 ARP Bind In this page, you are able to set ma tching rule of single PC’s MAC and IP, and prevent other illegal IP and illegal MAC from having access to the 22
![](/img/blank.gif)
TEI480T/490T/4000 Enterprise & Net-bar Level Router network, and to prevent ARP cheating. z Load All: To Load the IP and MAC addresses displayed in Advance SettingÆ Statistic. If you want to add IP and MAC addresses in the network, please add this manually. z Other Configuration: Add Item, E nable Item, Delete Item, Search Item and Save Notice: If you enable this function, there is no IP or MAC addresses in the table, then all the computers in the network are not able to connect to the network, only the IP and MAC addresses displaying in the table are entitled to have access to the network. 4.3.6 Virtual Server Under the Virtual Server Menu, there are three sub-items including Virtual Server, UPnP Setting and DMZ. Single click a certain sub-item, you are able to have respective checking and configuration. 23
![](/img/blank.gif)
TEI480T/490T/4000 Enterprise & Net-bar Level Router 4.3.6.1 Virtual Server z Virtual Server is defined as a service port. All external access to this port of WAN is re-oriented to the computers on the LAN ¾ Service Port: LAN service port, this refers to the internal service port which should be connected to the WAN service port. ¾ Network IP: Please input the IP of the internal host which requires to open virtual service. ¾ Protocol: Please choose protocol of TCP/UDP/ALL for data transferring. ¾ Enable: Please select “Enable” to activate the setting. Notice: If you configure the virtual serv er with service port of 80, then you are required to set the value in “Remote Control” under “Security 24
![](/img/blank.gif)
TEI480T/490T/4000 Enterprise & Net-bar Level Router Setting” with a value different from 80, for example, 8080 Otherwise, conflict would happen and cause the virtual server to fail to work. If this happens, in order to activate this function again, you should restart the router. 4.3.6.2 UPnP Setting TEI480T/TEI490T/4000 supports the latest Universal Plug and Play. It would be effective under OS Windows ME/ Windows XP or above (Remarks: The OS should be integrated, and installed with Directx 9.0 or above revision.), or under the applications which supports UPnP. For example, a computer under OS of Windows ME/Windows XP with MSN Messenger is able to use UPNP protocol when using the video and audio communication. 4.3.6.3 DMZ Some programs require many connections while running, for example, 25
![](/img/blank.gif)
TEI480T/490T/4000 Enterprise & Net-bar Level Router Internet Games, Video Meeting, Internet Phone etc. Because the firewall of the router exists, these programs are not able to work under pure virtual services. In this case, you could set the computer as DMZ host. As in the figure above, please input t he “DMZ Host IP”of the IP address of the computer which is required to se t as DMZ on the LAN. Then please click “Enable” to make the DMZ take effect. 4.3.7 Security Setting z Under the menu of “Security setting”, there are 6 sub-menus including: Client Filter, URL Filter , MAC Filter, Defense Network attack, Remote Management and Special Application Filter. We would give detail introduction to them as follows: 4.3.7.1 Client Filter z In order to enable you to have further management on the computers on the LAN, you can use the function of Client Filter to control the Internet access of the computers on the LAN. 26
![](/img/blank.gif)
TEI480T/490T/4000 Enterprise & Net-bar Level Router Steps for Client filter configuration are as follows: 1) Please Click “Security setting” and choose submenu “Client Filter” 2) Put IP address of the computer which are going to be controlled on the LAN into the “IP” section. 3) Fill in “Port” with the port name you expect to control. 4) In “Type”’, please choose the pr otocol used by the controlled data packets. (“All” indicates TCP/ UDP) 5) In “Time” section, please choose the effective date and expiry date. 6) Choose “Enable” to ac tivate this filter rule. 7) Single Click “Save” to complete setting. 4.3.7.2 URL Filter z URL Filter: Control the web pages that the hosts in LAN access to. z The steps to set URL Filter: 1) Click “Security setting”, and choose submenu “URL Filter”. 2) Choose “Enable URL Filter” to activate URL Filter Function. 3) Fill in the IP table with the IP segment you want to control. 27
![](/img/blank.gif)
TEI480T/490T/4000 Enterprise & Net-bar Level Router 4) In “URL string”, please input the filtered domain name, or input part of the filtered domain name. If you input a certain character string, the computer with selected IP would not be able to access to all domain names containing this character string. 5) Choose “Enable” to activate this filter rule. This rule is only effective for the WebPages to which the brow ser’s accessing port is 80. 6) Click “Save” to complete setting. 4.3.7.3 MAC Filter z In order to manage the hosts in LAN better, you could control the computers’ access to Internet by MAC filter. Steps for setting MAC filter are as follows: 1) Click “Security setting”, and choose submenu “MAC Filter”. 2) Choose “Enable” to activate MAC Filter. 3) Choose “Filter” to forbid the MA C address to connect with Internet; Choose “Permit” to enable the MAC addre ss to connect with Internet. 4) Input the MAC address of hosts which you want to control in to the 28
![](/img/blank.gif)
TEI480T/490T/4000 Enterprise & Net-bar Level Router “Configure MAC” section, and fill in “Note” with proper description. And you can also select the MAC address of the host which you know in the table of “Operate”, please click ”Add” and then click “Save” to complete configuration. 4.3.7.4 Defense Network Attack z Enable each function to prevent hacker and the various attacks, and protect the network security. ¾ Defend Dos Attack: Only after enabling the Defend Dos Attack function can other function be used. ¾ Neglect PING from WAN: Neglect PING from WAN ¾ Filter PING from LAN: Enabling this function to prevent from shockwave virus’s attack ¾ Enable ICMP-FLOOD attack filter: Enabling this function to prevent from shockwave virus’ attack 29