Tenda Router TEI480T User Manual

							
Copyright Statement 
 is the registered trademark of Shenzhen Tenda 
Technology Co., Ltd. Other trademark or trade name mentioned herein 
are the trademark or registered trademark of the company. Copyright 
of the whole product as integrati on, including its accessories and 
software, belongs to Shenzhen Tenda Technology Co., Ltd. Without 
the permission of Shenzhen Tenda Technology Co., Ltd, individual or 
party is not allowed to copy, plagiarize, imitate or translate it into other 
languages. 
All the photos and product specifications mentioned in this manual 
are for references only, as the upgrad ing of software and hardware, 
there will be changes. And if there are changes, Tenda is not 
responsible for informing in advance. If you want to know more about 
our products information, please visit our website at www.tenda.cn   
  
						

							
                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
   1 
 
Table of Contents 
Chapter One Introduction………………………………………………...…..3 
1.1 Function…………………………………………………\
…….……………...3 
1.2 Unpacking……………………………………………\
………………….…...5 
Chapter Two Hardware Installation………………………………………….6 
2.1 Front Panel………………………………………\
………………………..…6 
2.2 Rear Panel………………………………………\
…………………….……..7 
2.3 Physical Environment…………………………………………………\
.……7 
2.4 Steps………………………………………………\
………………….…..…..7 
Chapter Three Connect to  the Broadband Router……………….……….9 
3.1 Set up LAN Connection………………………………\
……………….……9 
3.2 Set up WAN Connection………………………………………\
……………9 
Chapter Four Configuration on the Router………………………...………9 
4.1 Set up proper Network Configuration…………………………………..…9 
4.2 ISP Configuration………………………………………………...…….\
..…10 
4.2.1 Wizard…………………………………………………\
……….………….11 
4.2.1.1 PPPoE (ADSL)……………………………………….………………\
…11 
4.2.1.2 Dynamic IP……………………………………………….……………\
..11 
4.2.1.3 Static IP……………………………………………\
………….…………12 
4.3 Configurati on…………………………………………………..…………\
…13 
4.3.1 Start and Log In…………………………………………………………\
..13 
4.3.2 Running Status……………………………………………\
……………...13 
4.3.3 General Setting……………………………………………..…………\
…14 
4.3.3.1 LAN Setting……………………………………\
………….…………….14 
4.3.3.2 WAN Setting…………………………………………….…………...\
…15 
4.3.3.3 MAC Clone……………………………………………………………\
..16 
4.3.3.4 DNS Server……………………………………………………..……\
...16 
4.3.3.5 Access  Limit…………………………………………………………\
….17 
4.3.4 DHCP Server……………………………………………\
………………..17 
4.3.4.1 LAN DHCP Server………………………………………..…………\
…17 
4.3.4.2 DHCP Client  List……………………………………………………\
 .. 18  
						

							
                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
   2 
 
4.3.5 Advance  Setting…………………………………………….....…………19 
4.3.5.1 Statistic……………………………………………\
………………….…19 
4.3.5.2 Port Monitor…………………………………………………………\
….20 
4.3.5.3 VLAN………………………………………\
……………………...…….21 
4.3.5.4 Bandwidth Control……………………………………………..……\
…21 
4.3.5.5 LAN IP Control…………………………………………………..……\
..22 
4.3.5.6 ARP  Bind………………………………………………………..……\
…22 
4.3.6 Virtual Server………………………………………\
………………….….23 
4.3.6.1 Virtual  Server…………………………………………….…………\
.….24 
4.3.6.2 UPnP Setting………………………………………..………….……....25 
4.3.6.3 DMZ…………………………………………\
………………….….……25 
4.3.7 Security Setting…………………………………………….…………\
….26 
4.3.7.1 Client Filter………………………………………………..……………\
26 
4.3.7.2 URL Filter……………………………………………\
………………….27 
4.3.7.3 MAC Filter……………………………………\
…………………………28 
4.3.7.4 Defense Netw ork Attack……………………………..………………\
..29 
4.3.7.5 Remote Control………………………………………………….…\
…..30 
4.3.7.6 Special Appl ication Filter………………………………………\
………31 
4.3.8 Route Setting…………………………………………\
……….……….…31 
4.3.8.1 System Routing Table……………………………………………\
…….31 
4.3.8.2 Static Routing Table…………………………………………………\
…32 
4.3.9 System Tool………………………………………………..….…………. 33 
4.3.9.1 Time Setting…………………………………………………………\
….33 
4.3.9.2 DDNS………………………………………………\
………….…..…….33 
4.3.9.3 Backup/ Resume  settings…………………………………..…...…….34 
4.3.9.4 Software Upgrade ………………………………………….….…..\
.….35 
4.3.9.5 Restore to Factory Setting………………………………….……....…36 
4.3.9.6 Restart………………………………………………\
……………...…...36 
4.3.9.7 Change Pass word……………………………………….….……..\
…..37 
4.3.9.8 System Log………………………………………………….………\
….37  
4.3.9.10 Log out………………………………………………\
……………...…37 
  
						

							
                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
   3 
 
Chapter One Introduction 
Thanks for purchasing TEI480T/490T /4000 Enterprise/Net-bar level 
router. TEI480T/490T/4000 is Tenda’s  latest multifunctional broadband 
access products specially designed for Net-bar, community, enterprise and 
school. TEI480T/490T/4000 ar e adopting the world level high quality, high 
stability Intel IXP high level network processor, main Frequency is up to 
266/533 MHz, adopting six-layers PCB  professional design, fully ensuring 
the powerful function and super stability of the machine. Full duplex data 
transferring up to 200Mbps, supports up to 60,000 Link counts, data packing 
is fast and stable. Powerful Firewall is able to prevent various hacker 
attacks, ARP attacks and cheating and ARP virus etc.             
TEI480T/490T/4000 are equipped with  all the common function of other 
broadband routers, besides, TEI480T /490T/4000 also supports Statistic 
monitoring on clients, Bandwidth control based on IP address, Link Count 
Controlling on a certain computer, IP and MAC address binding, Port 
Mirroring, VLAN, UPnP, DDNS, VPN Pass-th rough and Firewall etc. Please 
read this user’s manual carefully before using. 
1.1 Function 
z   Compliant with IEEE802.3, IEEE802.3u, IEEE802.3x 
z  Supports CSMA/CD, PPPoE, PPP, IP, ARP, DHCP, TCP, UDP, HTTP, 
FTP, DNS protocol 
z  Supports 1 10/100Mbps Auto-Negotiation WAN port, connectable to 
xDSL/Ethernet/Cable  
						

							
                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
   4 
 
z   Supports 4 10/100Mbps Auto-Negotiation LAN ports, connectable to 
LAN 
z  Supports port bandwidth control, port VLAN dividing and port mirroring 
z  Supports Statistic function, enabl es administrator to analyses the 
whole network usages status 
z   Support Web-Management function in cluding IP client filtering, URL 
Filtering, MAC Addr ess filtering etc. 
z  Support VPN Pass-through 
z  Supports QoS configuration based  on IP or Port, enables you to 
control the bandwidth of a certain client 
z   Supports IP and MAC address binding, prevent from ARP attacks 
z  Support virtual server, special software, DMZ and static routing 
z  Supports Link count c onfiguration and limit the  Link count of a certain 
computer  
z   Built-in firewall, supports IP address Filtering, URL Filtering ，MAC 
Address Filtering 
z   Prevent from DoS attack, ARP attack,  able to separate the computer 
which is infected by virus 
z   Support remote Web Management, English configuration Interface, 
supports simple and easy configuration guide 
z  TEI4000 supports one SFP expansion slot, supports optical fiber 
connection 
  
						

							
                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
   5 
 
1.2 Unpacking 
ITEM Quantity
TEI480T/490T/4000 Enterprise and  Net-bar Level router1 Unit 
Power cord 1 
User’s Manual 1 copy 
Quality Warranty Card 1 copy 
Quality Passed Certificate 1 copy 
Fast installation guide 1 pcs 
Mounting Brackets 4 pcs 
Rubber feet used for shock cushioning 4 pcs 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							
                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
   6 
 
Chapter Two Hardware Installation 
2.1 Front Panel 
a. Reset: Button for Resetting the rout er. Please press the Reset Button for 
5 seconds and the SYS LED Indicator wo uld be blinking. After 5 seconds, 
please un-press the button, the router  would restore to factory default 
setting and restart automatically. 
b. LED Indicators: 
LED 
Indicator Description Function 
POWER  Indicating the  Status of the PowerWhen the power LED lights on, the 
Switch is receiving power 
SYS Indicating the Status of the 
System When the SYS LED is blinking, the 
system is working normally. 
When the SYS LED lights ON or OFF, 
the system is working abnormally. 
Link/Act Indicating the  Status of WAN and 
LAN When the LED lights ON, the 
respective port is successfully 
connected to the Ethernet network. 
When the LED is blinking, the 
respective port is transmitting or 
receiving data. 
100Mbps Indicating the 
Speed of WAN and 
LAN When the LED for 100M lights ON, the 
respective port is working at the speed 
of 100M; 
When the LED for 100M lights OFF, the 
respective port is working at the speed 
of 10M  
						

							
                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
   7 
 
c. WAN Port: Wide Area Network (RJ-45). Please connect the xDSL Modem 
or the Ethernet access cable to  the WAN port of the router. 
d. LAN Port: Local Area Network (RJ-45). Please connect the LAN  port to 
computer, Hub or Switch. 
2.2 Rear Panel   
Power: Please use the power attached in the package. 
2.3 Physical Environment 
Required Physical Envir onment for Installation: 
¾  Please place the router on a sturdy  level surface and install the router 
in a site free from high heat. 
¾   Please place the router in wet or dirty places. 
¾  Please do not wipe the router with wet cloth. 
¾  Recommend operating environment: 
Temperature:0 ℃~38℃(32℉~100℉) 
Humidity: 5%~90% RH (Non-condensing) 
2.4 Steps 
a. Set up LAN Hardware connection 
Please connect the LAN port with the swit ches or Hubs in the LAN. Or you 
can also connect the LAN port of your r outer directly to the LAN adapter of 
your computer. 
b. Set up WAN Hardware connection 
Please connect your xDSL or Ethernet to  the WAN port of the router with  
						

							
                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
   8 
 
Cat. 5 cable. 
c. Connect the power cord 
Please connect the power cord correctly and the router would start 
automatically. 
 
Note: TEI4000 supports one SFP expansion slot, supports optical fiber 
connection 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							
                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
   9 
 
Chapter Three Connect to the Broadband Router 
3.1 Set up LAN Connection 
Please connect the LAN port with the sw itches or Hubs in the LAN. Or 
you can also connect the LAN port of your  router directly to the LAN adapter 
of your computer. 
3.2 Set up WAN Connection 
Please connect your xDSL or Ethernet to the WAN port of the router 
with Cat. 5 cable. 
Dynamic IP: To distribute IP Address through DHCP service 
Static IP: To connect to the Internet through fixed IP Address provided 
by your ISP 
 
Chapter Four Configuration on the Router 
Before using the router, please hav e proper network configuration on 
your computer, this would enables you to have normal communication with 
the router. 
4.1 Set up proper Network Configuration 
z   Please set the IP address of your computer as auto-obtain or Fix IP 
Address. The router has its fact ory default IP address which is 
“192.168.0.1”, please open IE and ent er “192.168.0.1” in the address 
bar. The system would require the user to enter User Name and 
Password as the figure below. Please enter the User Name and