Tenda Router TEI480T User Manual
Here you can view all the pages of manual Tenda Router TEI480T User Manual. The Tenda manuals for Router are available online for free. You can easily download all the documents as PDF.
Page 31
TEI480T/490T/4000 Enterprise & Net-bar Level Router ¾ Enable UDP-FLOOD filter: Enablin g this function to prevent from UDP-FLOOD Attack ¾ Enable TCP-SYN-FLOOD attack filter :Enabling this function to prevent from SYN-FLOOD attack. Notice: 1、 The computer is limited and not able to connect to the network when the network attack is found, and you can find the IP address of the host that launched the attack by in the table. 2 、 When the attack or virus of the computer...
Page 32
TEI480T/490T/4000 Enterprise & Net-bar Level Router Port (e.g.: http://192.168.0.1:8080)’, to log in, and execute remote management. 2 、 The default IP for remote management is 0.0.0.0. When enabling this function, every host in the WAN could log in and remotely manage the router. If you change the default IP (e.g.: changed into 58.60.111.221), only the host with specified IP (58. 60.111.221) could execute this WEB management function. 4.3.7.6 Special Application...
Page 33
TEI480T/490T/4000 Enterprise & Net-bar Level Router z This section displays the core cont ents of the system routing table of the router. 4.3.8.2 Static Routing Table z You could set the static routing functi on, and specify static routing rule. ¾ Destination IP: IP for host(s) or network to access ¾ Subnet Mask: Usually subnet Mask of destination address Normally is 255.255.255.0 ¾ Gateway: The IP address for the router or host to transmit packet to....
Page 34
TEI480T/490T/4000 Enterprise & Net-bar Level Router If the destination IP is 10.1.2.0, Subnet mask should be 255.255.255.0 4.3.9 System Tool z Under “System Tool”, there are 8 sub-items. They are Time Setting, Dynamic DNS (DDNS), Backup/ Resu me settings, Upgrade, Restore factory settings, Restart, Passwo rd and System Log. Click the sub-item, you are able to have respec tive configuration. Below is the detailed introduction. 4.3.9.1 Time Setting z You would choose...
Page 35
TEI480T/490T/4000 Enterprise & Net-bar Level Router z Register your Domain name in Oray.net. Input your registered User Name and password, and saved. Then, you could access your local server by the Domain name through the DDNS of this router: (For example, register a user name qp612 in Oray.net. And set up a WEB server on the local host of 192.168.0.111 The domain name is qp612.vicp.net. When Mapped the port in Virtual server, you are able to input “http://...
Page 36
TEI480T/490T/4000 Enterprise & Net-bar Level Router the router and we are able to restore to the previous system configuration. 4.3.9.4 Software Upgrade By upgrading router firmware, you would obtain more stable router version and value-added function. Steps for Upgrading 1 、 Download the latest version of firmware from our homepage www.tenda.cn. 2、 Open a TFTP Server in a certain PC which is on the LAN. Please unpack the file downloaded and use WinRAR to unpack...
Page 37
TEI480T/490T/4000 Enterprise & Net-bar Level Router 4.3.9.5 Restore to Factory Settings z By clicking the “Restore” button, a ll the function on the router would go back to factory default settings. They are as follows: ¾ Default User Name: admin ¾ Default Password: admin ¾ Default IP: 192.168.0.1 ¾ Default Subnet Mask: 255.255.255.0 ¾ You should restart the router to take effect after restoring to factory default setting 4.3.9.6 Restart z By click...
Page 38
TEI480T/490T/4000 Enterprise & Net-bar Level Router 4.3.9.7 Change Password z In this section, you can change the User Name and Password. z Please input your new User name, old password, and new password. Then click “Save”, The User name and Password would be changed successfully if the informati on that you input are correct. Notice: Considering the security, we strongly recommend you to change the default User Name and Password. 4.3.9.8 System Log z In System...