Telrad Digital Executive Set With Extended Display User Guide R6

6 Executive set with expanded display
DN buttons may be programmed in three different modes:
•
ringing mode - the telephone rings and the DN button 
flashes green when a call is received.
•
flashing mode - the DN button flashes green when a 
call is received, but there is no ringing.
•
delayed ringing mode - a call rings first at another sta-
tion or group of stations, for a programmed length of 
time, before beginning to ring at your station.
Outside line buttons
One or more of the buttons on your...

Executive set with expanded display 7
DISTINCTIVE RINGING
To change the ring for your telephone set
1. Press
 [
*] and
 [#] simultaneously.
2. Press one of the dialpad buttons 
([1]-[9]).
When you hear the ring that you want:
3. Press
 {SAVE}.
4. Lift and replace the handset.
Your telephone set reinitializes and all telephone rings 
(internal, external, recall, etc.) sound with the distinctive 
ring selected. 

8 Executive set with expanded display
MUTE
If you want to talk to someone in your office during a call 
without the connected party hearing, you can disable the 
handset or telephone set microphone.
To enable or disable the microphone 
(MUTE)
•Press
 [MUTE] during a conversation.
To enable or disable 
the handset microphone (HANDSET MUTE)
During a handset call:
• Press the 
HS MUTE button (if programmed).
NOTE
If your station is Single Audio Path (SAP), pressing 
[MUTE] deactivates both microphones....

Executive set with expanded display 9
HOT DIALPAD
The hot dialpad enables you to dial and activate features 
without lifting the handset or pressing
 [SPKR] first.
NOTE
The instructions in this guide assume that you 
have hot dialpad capability. 

10 Executive set with expanded display
INTERNAL CALLS
To place a non-ringing call
• Dial the extension number.
To place a ringing call
1. Dial the Tone code
 [1].
2. Dial the extension number.
IF THE EXTENSION YOU CALLED 
IS BUSY (CALLBACK)
When you dial an extension and hear busy tone, you can 
activate the Callback feature:
1. Press
 {CALL BACK}.
2. Hang up.
When the called extension becomes available, your tele-
phone rings. Then:
3. Press 
[SPKR] or lift the handset.
You hear the called extension...

Executive set with expanded display 11
PAGE CALLS
You can make announcements through an external page 
unit, or through the speakers of all DIGITAL telephones in a 
page zone.
1. Lift the handset.
2. Press
 [FEAT].
3. Dial the PAGE zone access code (
[4][1] - [4][8]).
After the double tone burst:
4. Make your announcement.
To speak directly with a page initiator 
(MEET ME PAGE)
You can call a page initiator during a page call:
1. Lift the handset.
2. Press
 [FEAT].
3. Dial the MEET ME PAGE code (...

12 Executive set with expanded display
ANSWERING CALLS
When you receive a call, an indicator flashes green on a 
telephone set that is programmed with DN buttons. For 
internal calls the top line of the display shows the name of 
the caller and their extension number.
 For external calls, the display shows the trunk name and 
number. A softkey also appears for the incoming call, indi-
cating to which DN the call is allocated, or which outside 
line it is on. You usually also hear a ring, unless your...

Executive set with expanded display 13
CALL  WAITING
You may hear a beep, indicating a second call, while 
already engaged in a conversation. A
 {RING} softkey 
appears. You can answer the call without disconnecting the 
first call.
To answer a second call 
1. Press 
[HOLD].
The first call is put on hold. The indicator for the DN 
flashes green. A 
{HOLD} softkey appears, indicating 
which line is on hold. The top line of the display shows 
the extension number of the call that is on hold or the 
outside...

14 Executive set with expanded display
OUTSIDE CALLS
Outside calls may be placed by accessing an outside line 
(or group) or by using the Least Cost Routing (LCR) fea-
ture.
When the instructions tell you to access an outside line, 
you may:
• Press an outside line or outside line group button.
• Dial an outside line code or outside line group code.
• Dial the LCR code (usually
 [9]).
• Press the LCR button.
Depending on system programming, the cost of your call 
may be displayed briefly at the end of...

Executive set with expanded display 15
AUTOMATIC REDIAL
If you dial an outside number and hear busy tone, you can 
have the system dial the number several times, at pre-
defined intervals.
When you hear busy tone
• Press an
 ARD button.
When the called party answers:
•Press
 [SPKR] or lift the handset.
If the dialed number rings, or if the system makes the 
maximum number of dialing attempts, the Automatic 
redial is deactivated.
To temporarily deactivate 
or reactivate Automatic Redial
• Press the 
ARD...