Technics Stereo Power Amplifier Se R1 Owners Manual
Here you can view all the pages of manual Technics Stereo Power Amplifier Se R1 Owners Manual . The Technics manuals for Stereo Amplifier are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
11
English
You can input analog audio signals to this unit and play back music.
*1 Select [BALANCED] or [UNBALANCED]. Set the analog audio input selector switch to a position that corresponds to the device you want to
play.
*2 We recommend using cables with a length of 3 m (9.9 ft) or less .
≥When connecting to an analog audio output device, set the input selector knob to [ANALOG]. (>13)
∫To disconnect the XLR cables
Pull out the XLR cables while pressing [PUSH] at the top of the terminals....](http://img.usermanuals.tech/thumb/4760/63993/w300_se-r1_en_om_d-10.png "Page 11
11
English
You can input analog audio signals to this unit and play back music.
*1 Select [BALANCED] or [UNBALANCED]. Set the analog audio input selector switch to a position that corresponds to the device you want to
play.
*2 We recommend using cables with a length of 3 m (9.9 ft) or less .
≥When connecting to an analog audio output device, set the input selector knob to [ANALOG]. (>13)
∫To disconnect the XLR cables
Pull out the XLR cables while pressing [PUSH] at the top of the terminals....")
11 English You can input analog audio signals to this unit and play back music. *1 Select [BALANCED] or [UNBALANCED]. Set the analog audio input selector switch to a position that corresponds to the device you want to play. *2 We recommend using cables with a length of 3 m (9.9 ft) or less . ≥When connecting to an analog audio output device, set the input selector knob to [ANALOG]. (>13) ∫To disconnect the XLR cables Pull out the XLR cables while pressing [PUSH] at the top of the terminals....
Page 12
![Page 12
12
Connect only after all other connections are completed.
∫To disconnect the AC power supply cord from this unit
Pull out the AC power supply cord while pressing the top and bo ttom sides of the connector.
≥Although the AC power switch is in the [ ] position, the unit is not completely disconnected from the mains. Remove the plug from the
main electrical outlet if you will not be using the unit for an extended period of time. Place the unit so the plug can be eas ily removed.
AC power supply cord...](http://img.usermanuals.tech/thumb/4760/63993/w300_se-r1_en_om_d-11.png "Page 12
12
Connect only after all other connections are completed.
∫To disconnect the AC power supply cord from this unit
Pull out the AC power supply cord while pressing the top and bo ttom sides of the connector.
≥Although the AC power switch is in the [ ] position, the unit is not completely disconnected from the mains. Remove the plug from the
main electrical outlet if you will not be using the unit for an extended period of time. Place the unit so the plug can be eas ily removed.
AC power supply cord...")
12 Connect only after all other connections are completed. ∫To disconnect the AC power supply cord from this unit Pull out the AC power supply cord while pressing the top and bo ttom sides of the connector. ≥Although the AC power switch is in the [ ] position, the unit is not completely disconnected from the mains. Remove the plug from the main electrical outlet if you will not be using the unit for an extended period of time. Place the unit so the plug can be eas ily removed. AC power supply cord...
Page 13
![Page 13
13
EnglishTo optimize the audio output, you can measure the amplifier
characteristics and correct its output when it is connected to
the speakers.
≥Set the speaker selector knob to a position that corresponds to the
connected speakers. ( >right)
1Press the unit on/off button to the [ ]
position.
≥The power indicator lights up in blue.
2Press and hold [LAPC] until the LAPC
indicator on this unit starts to blink.
≥ This unit will start measuring the characteristics of the
amplifier. Check that a...](http://img.usermanuals.tech/thumb/4760/63993/w300_se-r1_en_om_d-12.png "Page 13
13
EnglishTo optimize the audio output, you can measure the amplifier
characteristics and correct its output when it is connected to
the speakers.
≥Set the speaker selector knob to a position that corresponds to the
connected speakers. ( >right)
1Press the unit on/off button to the [ ]
position.
≥The power indicator lights up in blue.
2Press and hold [LAPC] until the LAPC
indicator on this unit starts to blink.
≥ This unit will start measuring the characteristics of the
amplifier. Check that a...")
13 EnglishTo optimize the audio output, you can measure the amplifier characteristics and correct its output when it is connected to the speakers. ≥Set the speaker selector knob to a position that corresponds to the connected speakers. ( >right) 1Press the unit on/off button to the [ ] position. ≥The power indicator lights up in blue. 2Press and hold [LAPC] until the LAPC indicator on this unit starts to blink. ≥ This unit will start measuring the characteristics of the amplifier. Check that a...
Page 14
![Page 14
14
You can automatically link this unit with the SU-R1 and
operate them easily with the remote control of the SU-R1.
Preparation
1Connect this unit and the SU-R1 with cables for system
control. ( >10)
2 Set the input selector knob to [DIGITAL]. ( >13)
3 Press the unit on/off button on this unit and the SU-R1 to
the [ ] position.
4 If “Digital Link” is set to “Off” on the SU-R1, change the
setting to “On”.
∫Switching this unit and the SU-R1 to
on/standby simultaneously
≥If you point the SU-R1’s...](http://img.usermanuals.tech/thumb/4760/63993/w300_se-r1_en_om_d-13.png "Page 14
14
You can automatically link this unit with the SU-R1 and
operate them easily with the remote control of the SU-R1.
Preparation
1Connect this unit and the SU-R1 with cables for system
control. ( >10)
2 Set the input selector knob to [DIGITAL]. ( >13)
3 Press the unit on/off button on this unit and the SU-R1 to
the [ ] position.
4 If “Digital Link” is set to “Off” on the SU-R1, change the
setting to “On”.
∫Switching this unit and the SU-R1 to
on/standby simultaneously
≥If you point the SU-R1’s...")
14 You can automatically link this unit with the SU-R1 and operate them easily with the remote control of the SU-R1. Preparation 1Connect this unit and the SU-R1 with cables for system control. ( >10) 2 Set the input selector knob to [DIGITAL]. ( >13) 3 Press the unit on/off button on this unit and the SU-R1 to the [ ] position. 4 If “Digital Link” is set to “Off” on the SU-R1, change the setting to “On”. ∫Switching this unit and the SU-R1 to on/standby simultaneously ≥If you point the SU-R1’s...
Page 15
15 English Specifications ≥Specifications are subject to change without notice. ≥ Mass and dimensions are approximate. ∫ GENERAL Power supply AC 120 V, 60 Hz Power consumption 250 W Power consumption in standby mode Approx. 0.7 W Power consumption in off mode Approx. 0.3 W Dimensions (Wk Hk D) 480 mmk241 mm k567 mm (18 7/8qk 915/32qk 2211/32q) Mass (Weight) Approx. 54 kg (119 lbs) Operating temperature range 0oC to r 40oC ( r32 oF to r104 oF) Operating humidity range 35 % to 80 % RH (no condensation)...
Page 16
16 Limited Warranty (ONLY FOR U.S.A.) Technics Products – Limited Warranty Limited Warranty Coverage (For USA Only) If your product does not work properly because of a defect in m aterials or workmanship, Panasonic Corporation of North America (referred t o as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it...
Page 17
17 English Limited Warranty (ONLY FOR CANADA) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 TECHNICS PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agree s to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund...
Page 18
4 Nous vous remercions d’avoir arrêté votre choix sur cet appareil. Il est recommandé de lire attentivement ce manuel avant d’utiliser l’appareil et de le conserver pour consultation ultérieure. ∫Caractéristiques de cet appareil Cet appareil offre les caractéristiques suivantes : Amplificateur complètement numérique avec circuit de réduct ion de gigue très précis et circuit de conversion MID Cet appareil est un amplificateur complète ment numérique. Son circuit de réduction de gigue très précis et son...
Page 19
5 Français (Canada) IMPORTANTES MISES EN GARDE Avant d’utiliser l’appareil, lire attentivement les instructions qui suivent. Se conformer tout particulièrement aux avertissements inscrits sur l’appareil et aux consignes de sécurité indiquées ci-dessous. Conserver le présent manuel pour consultation ultérieure. 1 Lire attentivement ces instructions. 2 Conserver ces instructions. 3 Lire toutes les mises en garde. 4 Suivre toutes les instructions. 5 Ne pas utiliser cet appareil près d’une source d’eau. 6...
Page 20
6 Table des matières Accessoires (SEULEMENT POUR LE CANADA) La feuille d’autocollants en français ci-incluse correspond aux noms des touches sur l’appareil. ≥Les numéros de produit fournis dans ce manuel de lutilisateur sont corrects à compter de décembre 2014. Ces numéros peuvent êt re modifiés sans préavis. ≥ Ne pas utiliser le cordon d’alim entation avec aucun autre appareil. Entretien de l’appareil Débrancher le cordon d’alimentation avant de procéder à l’entreti en de l’appareil. Nettoyer cet...