Technics Stereo Power Amplifier Se R1 Owners Manual
Here you can view all the pages of manual Technics Stereo Power Amplifier Se R1 Owners Manual . The Technics manuals for Stereo Amplifier are available online for free. You can easily download all the documents as PDF.
Page 1
Owner’s Manual Manuel d’utilisationStereo Power Amplifier Amplificateur de puissance SE-R1 SE-R1-SQT0505_PP_mst.book 1 ページ ２０１５年１月２３日 金曜日 午前９時５１分
Page 2
SE-R1-SQT0505_PP_mst.book 2 ページ ２０１５年１月２３日 金曜日 午前９時５１分
Page 3
Music is borderless and timeless, touching people’s hearts across cultures and generations. Each day the discovery of a truly emotive experience from an unencountered sound awaits. Let us take you on your journey to rediscover music. Sans frontières, la musique est aussi intemporelle, touchant le coeur des gens en traversant les cultures et les générations. Tous les jours, nous attendons la révélation d'une expérience émotionnelle authentique à partir d'un son venu de nulle part....
Page 4
4 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. If you have any questions, visit: U.S.A.: www.panasonic.com/support Canada: www.panasonic.ca/english/support Register online at www.panasonic.com/register (U.S. customers only) ∫ Features of this unit This unit offers the following features: Full-digital amplifier with a high-precision jitter reduction c ircuit and PWM conversion circuit This unit is a...
Page 5
5 English IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instr uctions listed below. Keep these operating instructions handy for future refer ence. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance w ith...
Page 6
6 Table of contents Accessories (ONLY FOR CANADA) The enclosed Canadian French label sheet corresponds to the English display on the unit. ≥Product numbers provided in this Owner’s Manual are correct as of December 2014. These may be subject to change. ≥ Do not use AC power supply cord with other equipment. Unit care Pull out the AC power supply cord from the outlet before mainte nance. Clean this unit with a soft cloth.≥When dirt is heavy, wring a wet cloth tightly to wipe the dirt, and then wipe it...
Page 7
![Page 7
7
English
Control reference guide
∫Front
1 Unit on/off button [ ]
Use this button to turn the unit on and off.
[ ] (off): The unit is off.
[ ] (on): The unit is on.
≥The unit is still using a small amount of power in off mode. Of f
mode uses less power. ( >15)
2 Power indicator
The color of the indicator changes according to the status
of this unit.
3 Peak power meter
Display the output level.
4 LAPC indicator ( >13)
5 [DIMMER]
Adjust the brightness of the light and the indicators.
Each press of this...](http://img.usermanuals.tech/thumb/4760/63993/w300_se-r1_en_om_d-6.png "Page 7
7
English
Control reference guide
∫Front
1 Unit on/off button [ ]
Use this button to turn the unit on and off.
[ ] (off): The unit is off.
[ ] (on): The unit is on.
≥The unit is still using a small amount of power in off mode. Of f
mode uses less power. ( >15)
2 Power indicator
The color of the indicator changes according to the status
of this unit.
3 Peak power meter
Display the output level.
4 LAPC indicator ( >13)
5 [DIMMER]
Adjust the brightness of the light and the indicators.
Each press of this...")
7 English Control reference guide ∫Front 1 Unit on/off button [ ] Use this button to turn the unit on and off. [ ] (off): The unit is off. [ ] (on): The unit is on. ≥The unit is still using a small amount of power in off mode. Of f mode uses less power. ( >15) 2 Power indicator The color of the indicator changes according to the status of this unit. 3 Peak power meter Display the output level. 4 LAPC indicator ( >13) 5 [DIMMER] Adjust the brightness of the light and the indicators. Each press of this...
Page 8
![Page 8
8
Getting started
≥Turn off all equipment before connection and read the appropria te operating instructions.
≥ Do not connect the AC power supply cord until all other connect ions are complete.
≥ Insert the plugs of the cables to be connected all the way in.
≥ Do not bend cables at sharp angles.
∫ Single wiring connection
≥When using single wiring connection, set the speaker selector k nob to [A] or [B]. (>13)
1Turn the knobs to loosen them, and insert the core wires.
2Tighten the knobs.
WARNING:
RISK...](http://img.usermanuals.tech/thumb/4760/63993/w300_se-r1_en_om_d-7.png "Page 8
8
Getting started
≥Turn off all equipment before connection and read the appropria te operating instructions.
≥ Do not connect the AC power supply cord until all other connect ions are complete.
≥ Insert the plugs of the cables to be connected all the way in.
≥ Do not bend cables at sharp angles.
∫ Single wiring connection
≥When using single wiring connection, set the speaker selector k nob to [A] or [B]. (>13)
1Turn the knobs to loosen them, and insert the core wires.
2Tighten the knobs.
WARNING:
RISK...")
8 Getting started ≥Turn off all equipment before connection and read the appropria te operating instructions. ≥ Do not connect the AC power supply cord until all other connect ions are complete. ≥ Insert the plugs of the cables to be connected all the way in. ≥ Do not bend cables at sharp angles. ∫ Single wiring connection ≥When using single wiring connection, set the speaker selector k nob to [A] or [B]. (>13) 1Turn the knobs to loosen them, and insert the core wires. 2Tighten the knobs. WARNING: RISK...
Page 9
![Page 9
9
English
∫Bi-wiring connection
≥When making bi-wiring connections, set the speaker selector kno b to [A+B]. (>13)
≥When the connections are completed, pull the speaker cables lig htly to check that they are connected firmly.
≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the
amplifier.
≥ Wire the polarity ( r/s ) of the terminals correctly. Not doing so may adversely affect stereo effects or cause
malfunction.
≥ For details, refer to...](http://img.usermanuals.tech/thumb/4760/63993/w300_se-r1_en_om_d-8.png "Page 9
9
English
∫Bi-wiring connection
≥When making bi-wiring connections, set the speaker selector kno b to [A+B]. (>13)
≥When the connections are completed, pull the speaker cables lig htly to check that they are connected firmly.
≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the
amplifier.
≥ Wire the polarity ( r/s ) of the terminals correctly. Not doing so may adversely affect stereo effects or cause
malfunction.
≥ For details, refer to...")
9 English ∫Bi-wiring connection ≥When making bi-wiring connections, set the speaker selector kno b to [A+B]. (>13) ≥When the connections are completed, pull the speaker cables lig htly to check that they are connected firmly. ≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the amplifier. ≥ Wire the polarity ( r/s ) of the terminals correctly. Not doing so may adversely affect stereo effects or cause malfunction. ≥ For details, refer to...
Page 10
![Page 10
10
≥You can input digital audio signals to this unit and play back music.
≥ You can automatically link this unit with the SU-R1 and operate them easily with the remote control of the SU-R1. (>14)
≥When using the system control function, set the input selector knob to [DIGITAL]. (>13)
≥ Use category 7 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ We recommend using cables with a length of 3 m (9.9 ft) or less.
≥ Do not connect an SU-R1 in any other way than described...](http://img.usermanuals.tech/thumb/4760/63993/w300_se-r1_en_om_d-9.png "Page 10
10
≥You can input digital audio signals to this unit and play back music.
≥ You can automatically link this unit with the SU-R1 and operate them easily with the remote control of the SU-R1. (>14)
≥When using the system control function, set the input selector knob to [DIGITAL]. (>13)
≥ Use category 7 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ We recommend using cables with a length of 3 m (9.9 ft) or less.
≥ Do not connect an SU-R1 in any other way than described...")
10 ≥You can input digital audio signals to this unit and play back music. ≥ You can automatically link this unit with the SU-R1 and operate them easily with the remote control of the SU-R1. (>14) ≥When using the system control function, set the input selector knob to [DIGITAL]. (>13) ≥ Use category 7 or above straight LAN cables (STP) when connecting to peripheral devices. ≥ We recommend using cables with a length of 3 m (9.9 ft) or less. ≥ Do not connect an SU-R1 in any other way than described...