Technics Sl C700 Owners Manual

							11
English
Playing back CDs
Refer to “Notes on CDs” (>17) for information about the 
discs this unit can play back.
 
Preparation
≥ Turn on the connected device (amplifier, etc.) and lower its 
volume.
1Raise the power switch lever of this unit to 
the [ Í/I] position.
2Touch [  14) works.Operations during playback 
StopTouch [
∫].≥ When using the SU-C700/ST-C700 remote 
control, press [CD] first, and then press 
[∫].
Pause Touch [
1/;].≥Touch again to restart play.
≥ When using the SU-C700/ST-C700 remote 
control, press [CD] first, and then press 
[1/ ;].
Skip Touch [
:] or [9 ] to skip track.≥When using the SU-C700/ST-C700 remote 
control, press [CD] first, and then press 
[: ]
 or [9 ].
Search During play or pause, touch and hold 
[
: ] or [9 ].≥When using the SU-C700/ST-C700 remote 
control, press [CD] first, and then press 
and hold either [ 6] or [5 ]. 
12 cm CD
8 cm CD
DO DO NOT
On All tracks are repeated randomly.≥
“RND  `” is displayed.
Off Turns off random repeat mode.
1 TrackOnly plays the selected track.≥
“1  ` ” is displayed.
All Tracks All tracks are repeated.≥
“` ” is displayed.
Off Turns off repeat mode.
(11)
SL-C700-SQT0934.book  11 ページ  ２０１５年３月２４日　火曜日　午後５時３３分 
						

							12
≥Only available from the SU-C700/ST-C700 remote control: 
1Press [CD].
2Press [INFO] while playing back or paused.
The information displayed changes each time you press the 
button. 
For CD-DA: 
The display changes as follows; elapsed play time of the 
track, remaining time for the track, and remaining time on the 
entire disc (or entire program). 
For MP3/WMA: 
The display changes as follows; file name, folder name, title 
name, artist name, album name, format, etc.  This function allows you to program up to 25 tracks.
≥
Only available from the SU-C700/ST-C700 remote control: 
1Press [PGM] in the stop mode.
≥“PGM” screen will be displayed.
2Select tracks
For CD-DA:
Press the numeric buttons
For MP3/WMA:
Select folders/files (> 13)
≥ Repeat this step to make further selections. 
3Press [ 1/; ] to start playback.
Operations on the remote control
	
≥The program memory will be cleared:
– When the disc tray is opened.
– When the unit is turned to standby or off mode.
– When the auto off function (> 14) works.
≥ Program play settings are not possible while playing back a CD.
≥ Random repeat playback is not possible during program playback.
≥ You can also cancel program mode by operating the touch panel 
on this unit.
1 Touch [MENU] repeatedly to select “Play Mode”.
2 Touch [ :,9 ] to select the item and then touch [ 1/; ].
Viewing information such as 
the remaining playback timeProgram playback
Stop Press [
∫].≥ Programmed content is maintained.
Check the 
programmed 
order Press [
6] or [ 5] in the stop mode.
Add tracks Do steps 2 through 3 in the stop mode.
Clear the last 
trackPress [CLEAR] in the stop mode.≥
It is not possible to select and clear the 
desired programmed track.
Cancel 
program mode Press [PGM] in the stop mode.
“PGM” disappears.
(Programmed content is maintained) 
(12)
SL-C700-SQT0934.book  12 ページ  ２０１５年３月２４日　火曜日　午後５時３３分 
						

							13
English
For MP3/WMA CDs, files (MP3/WMA files) may be 
organized in a hierarchy, with folders containing files and 
subfolders, as shown below.
If you don’t select a specific MP3/WMA file or folder for 
playback, all of the MP3/WMA files on the CD will be played 
in numerical order starting with file #1.
∫Selecting files  in folder mode 
In folder mode, all folders containing files are shown as the 
same level, so you can select files without worrying about the 
structure of the folders. Select while the disc is stopped. 
≥Operation with the touch panel on the unit: 
1 Touch [MENU] repeatedly to select “Folder” and then 
touch [ 1/;].
≥ The first folder is displayed. (“Root” is displayed if it is 
the root folder.)
2 Touch [ :,9 ].
≥ Another folder name is displayed. 
3 Touch [ 1/;] so that you can select the files in that folder.
≥ To u c h   [ :,9 ] to display the files in the folder. 
≥ To u c h   [ ∫] to enable selection of a different folder and 
select different files. 
4 Touch [ 1/;].
≥ Playback starts for the displayed folder or file. 
≥ To u c h   [ ∫] to stop playback. 
≥ Operation with the  SU-C700/ST-C700 remote control:
1 Press [CD].
2 Press [MENU].
3 Press [ 3,4] repeatedly to select “Folder” and then 
press [OK] .
≥ The first folder is displayed. (“Root” is displayed if it is 
the root folder.)
4 Press [ 3,4] or [ :,9 ]. 
≥ Another folder name is displayed. 
5 Press [ 1] or [OK] so that you can select the files in that 
folder. 
6 The first file name in the folder is displayed. 
≥Press [ 3,4] or [ :,9 ] to display the files in the 
folder. 
≥ Pres
s [2
 ] or [RETURN] to enable selection of a 
different folder and select different files. 
7 Press [ 1/;] or [OK].
≥ Playback starts for the displayed folder or file. 
≥ To cancel the procedure at any point, press the [ ∫].
∫ Selecting the playback mode 
All: Plays back all tracks on the CD.
1 Folder: Plays back the tracks in a folder.
≥Operation with the touch panel on the unit:
1 Touch [MENU] repeatedly to select “Play Mode”. 
2 Touch [ :,9 ] to select the item and then touch 
[ 1/ ;]. 
≥ Operation with the  SU-C700/ST-C700 remote control:
1 Press [CD].
2 Press [MENU].
3 Press [ 3,4] repeatedly to select “Play Mode”.
4 Press [ 2,1] to select the item and then press [OK].
Selecting folders and files for 
MP3/WMA CDs
Folder#1
Root
Folder#2 File#1
File#10
Folder#3 Folder#4 File#11
File#12
File#13 File#14
File#18
(13)
SL-C700-SQT0934.book  13 ページ  ２０１５年３月２４日　火曜日　午後５時３３分 
						

							14
Others
The brightness of this unit’s display and the basic control 
switches can be changed.
≥Operation with the touch panel on the unit:
1Touch [MENU] repeatedly to select 
“Dimmer”.
2Touch [ :,9 ] to select an item and 
then touch [ 1/; ].
	
≥When using the SU-C700/ST-C700 remote control, press 
[DIMMER] to select the brightness.
≥ When the display is turned off, it will light up only when you 
operate this unit.
Before the display turns off again, “Display Off” will be displ ayed 
for a few seconds.
You can turn the beep sound on/off.≥ The factory default is “On”.
≥Operation with the touch panel on the unit:
1Touch [MENU] repeatedly to select “Setup” 
and then touch [ 1/; ].
2Touch [MENU] repeatedly to select “Beep”.
3Touch [ :,9 ] to select an item and 
then touch [ 1/; ].
4Touch [ ∫] twice after you have finished 
setting.
≥ Operation with the  SU-C700/ST-C700 remote control:
1Press [CD].
2Press [MENU].
3Press [ 3,4] repeatedly to select “Setup” 
and then press [OK].
4Press [ 3,4] repeatedly to select “Beep”.
5Press [ 2,1] to select “On”/“Off” and then 
press [OK].
6Press [MENU] after you have finished 
setting.
This unit is designed to conserve its power consumption and 
save energy. The unit will turn to standby mode automatically 
if there is no sound and it is not being used for approximately  
20 minutes.
≥ The factory default is “On”.
To cancel this function
≥Operation with the touch panel on the unit:
1Touch [MENU] repeatedly to select “Setup” 
and then touch [ 1/;].
2Touch [MENU] repeatedly to select 
“AUTO OFF”.
3Touch [ :,9 ] to select an item and 
then touch [ 1/;].
4Touch [∫] twice after you have finished setting.
≥ Operation with the  SU-C700/ST-C700 remote control:
1Press [CD].
2Press [MENU].
3Press [ 3,4 ] repeatedly to select “Setup” 
and then press [OK].
4Press [ 3,4 ] repeatedly to select 
“AUTO OFF”.
5Press [ 2,1 ] to select “Off” and then press 
[OK].
≥ To enable the output again, select “On”.
6Press [MENU] after you have finished setting.
	
≥ The auto off function works unless you turn it off, even if you  turn 
off and on this unit.
Display brightness
Operation sound setting
Auto off function
(14)
SL-C700-SQT0934.book  14 ページ  ２０１５年３月２４日　火曜日　午後５時３３分 
						

							15
English
Make settings to play back CD EXTRA discs. 
Audio : Plays back CD-DA data. 
MP3/WMA : Plays back MP3/WMA data.
≥The factory default is “Audio”.
≥Operation with the touch panel on the unit:
1Touch [MENU] repeatedly to select “Setup” 
and then touch [ 1/;].
2Touch [MENU] repeatedly to select “CD 
EXTRA”.
3Touch [ :,9 ] to select an item and 
then touch [ 1/; ].
≥Operation with the  SU-C700/ST-C700 remote control:
1Press [CD].
2Press [MENU].
3Press [3,4 ] repeatedly to select “Setup” 
and then press [OK].
4Press [ 3,4 ] repeatedly to select “CD 
EXTRA”.
5Press [ 2,1 ] to select an item and then 
press [OK].
Re-mastering expands the playback band and achieves a 
higher bit depth to reproduce natural and expansive sound 
close to original music.
≥ The factory default is “Off”.
≥Operation with the touch panel on the unit:
1Touch [MENU] repeatedly to select 
“RE-MASTER”.
2Touch [ :,9 ] to select an item and 
then touch [ 1/; ].
≥Operation with the  SU-C700/ST-C700 remote control:
1Press [CD].
2Press [RE-MASTER] to select “On”/“Off”.
	
≥This function works for both the analog and digital audio outpu ts.
You can set the upper limit for the sampling frequency for 
signals output from the digital audio output terminal when 
[RE-MASTER] is “On”. The sampling frequencies you can 
transmit depend on the device you have connected. Refer to 
the operating instructions for the device you have connected 
for details.
≥The factory default is “176.4kHz”.
≥ We recommend that you select “176.4kHz” when you have 
connected this unit and SU-C700 as a system. ( >9)
≥Operation with the touch panel on the unit:
1Touch [MENU] repeatedly to select “Setup” 
and then touch [ 1/;].
2Touch [MENU] repeatedly to select “Digital Output”.
3Touch [ :,9 ] to select an item and 
then touch [ 1/; ].
4Touch [∫] twice after you have finished setting.
≥Operation with the  SU-C700/ST-C700 remote control:
1Press [CD].
2Press [MENU].
3Press [ 3,4] repeatedly to select “Setup” 
and then press [OK].
4Press [ 3,4] repeatedly to select “Digital 
Output”.
5Press [ 2,1] to select an item and then 
press [OK].
≥You can select a sampling frequency of 44.1 kHz or 
176.4 kHz
.
6Press [MENU] after you have finished setting.
	
≥ Depending on the music source that you play back, the applied 
setting may be less effective.
≥ Depending on the music source that you play back, it may not be  
possible to achieve the desired audio quality and sound field 
effect. In such cases, turn off this function.
≥ It may take some time to output audio when you have adjusted th e 
audio quality.
≥ This has no effect on analog audio output.
≥ Sound may not be output when you set to 176.4 kHz, depending 
on the device you have connected. Set to 44.1 kHz if this occurs . 
([RE-MASTER] will be disabled.)
CD EXTRA
Listening to more natural-
sounding audio (Re-master)
Setting the upper limit for the 
sampling frequency during 
digital output
(15)
SL-C700-SQT0934.book  15 ページ  ２０１５年３月２４日　火曜日　午後５時３３分 
						

							16
When other equipment responds to the supplied remote 
control, change the remote control code.
≥The factory default is “Mode 1”.
≥Only available from the SU-C700/ST-C700 remote control: 
Point the remote control at this unit, and press 
and hold [OK] and the numeric button for at least 
4 seconds.
≥When the remote control code is changed, the new code 
will appear on the display for a few seconds.
	
≥ When the SU-C700/ST-C700 is connected via the system control 
function, change its remote control code as well as the remote 
control code for this unit.
Select English or French for the display.≥The factory default is “English”.
≥Operation with the touch panel on the unit:
1Touch [MENU] repeatedly to select “Setup” 
and then touch [ 1/; ].
2Touch [MENU] repeatedly to select 
“Language”.
3Touch [ :,9 ] to select “English”/ 
“Français” and then touch [ 1/; ].
4Touch [ ∫] twice after you have finished 
setting.
≥ Operation with the SU-C700/ST-C700 remote control:
1Press [CD].
2Press [MENU].
3Press [ 3,4] repeatedly to select “Setup” 
and then press [OK].
4Press [ 3,4] repeatedly to select 
“Language”.
5Press [ 2,1] to select “English”/“Français” 
and then press [OK].
6Press [MENU] after you have finished 
setting.
You can automatically link this unit with SU-C700 to operate 
them.
Preparation
1 Connect this unit and the SU-C700 with a system 
connection cable and a coaxial digital cable. ( >9)
2 Set the power switch lever of this unit and the SU-C700 
to the [Í/I] position.
∫Switching this unit and the SU-C700 to 
on/standby simultaneously
≥When this unit and SU-C700 are in standby mode, while 
pointing the SU-C700/ST-C700 remote control at this unit, 
press [CD Í] so that this unit and SU-C700 switch on 
automatically. 
∫ Switching the SU-C700’s input source 
automatically
When you perform an operation such as playback on this 
unit, the input source of the SU-C700 will be automatically 
switched to “COAX2”.
	
≥For information on the operations of the SU-C700, please also 
refer to its operating instructions.
Remote control code
[OK] + [1] Set the code to “Mode 1”
[OK] + [2]Set the code to “Mode 2”
Language
Using the system control 
function
(16)
SL-C700-SQT0934.book  16 ページ  ２０１５年３月２４日　火曜日　午後５時３３分 
						

							17
English
Notes on CDs
∫Compatible CD
≥A disc with the CD Logo.
≥ This unit can play back discs that conform to the CD-DA format.
≥ The unit may not be able to play some discs due to the conditio n of 
the recording.
≥ Before playback, finalize the disc on the device it was recorde d on.
∫Compatible MP3 files
≥Supported format: Files with the extension “.mp3” or “.MP3”.
≥ Compatible compression rate: Between 16 kbps and 320 kbps 
(stereo).
≥ Sampling Rate: 32, 44.1, 48 kHz.
≥ Depending on how you create the MP3 files, they may not play in  
the order you numbered them or may not play at all.
∫ Compatible WMA files
≥Supported format: Files with the extension “.wma” or “.WMA”.
≥ Compatible compression rate: Between 32 kbps and 192 kbps 
(stereo).
≥ Depending on how you create the WMA files, they may not play in  
the order you numbered them or may not play at all.
∫ CD-R/RW
≥Maximum number of tracks and albums: 499 tracks and 99 albums 
(Including Root folder).
≥ Disc formats: ISO9660 level 1 and level 2 (except for extended 
formats).
≥ This unit cannot play files recorded using packet write.
∫ Note about using a DualDisc
≥The digital audio content side of a DualDisc does not meet the 
technical specifications of the Compact Disc Digital Audio (CD-
DA) format so play may not be possible.
≥ Do not use a DualDisc in this unit as it may not be possible to  
insert it correctly and it may get scratched.
	
≥ This unit can display the “Windows-1252” character code.
Troubleshooting
Before requesting service, make the following checks. If you 
are uncertain about some of the check points, or if the 
solutions indicated in the following guide does not resolve 
the issue, then consult your dealer for instructions.
Heat buildup of this unit.
≥This unit becomes warm when used for a long time. This is 
not a malfunction.
A “humming” sound can be heard during 
playback.
≥An AC power supply cord or fluorescent light is near the 
cables. Keep other appliances and cords away from the 
cables of this unit.
No sound.
≥Check the volume of the connected device (amplifier, etc.).
≥ Check to see if the cable connections to the input and 
output terminals are incorrect. If this is the case, turn off 
this unit and reconnect the cables correctly.
≥ Fully insert the cable plug into the pin jack to assure a good 
connection.
To return all settings to the factory defaults
When the following situations occur, reset the memory:
≥ There is no response when buttons are pressed.
≥ You want to clear and reset the memory contents.
≥Operation with the touch panel on the unit:
1 Touch [MENU] repeatedly to select “Setup” and then 
touch [ 1/;].
2 Touch [MENU] repeatedly to select “Initialization”.
3 Touch [ :,9 ] to select “Yes” and then touch 
[ 1/ ;].
4 Touch [ :,9 ] to select “Yes” and then touch 
[ 1/ ;] again.
≥ Operation with the  SU-C700/ST-C700 remote control:
1 Press [CD].
2 Press [MENU].
3 Press [ 3,4] repeatedly to select “Setup” and then 
press [OK].
4 Press [ 3,4] repeatedly to select “Initialization” and 
then press [OK].
5 Press [ 2,1] to select “Yes” and then press [OK].
6 Press [ 2,1] to select “Yes” and then press [OK] 
again.
General
(17)
SL-C700-SQT0934.book  17 ページ  ２０１５年３月２４日　火曜日　午後５時３３分 
						

							18
The sound is interrupted.
≥Depending on your environment, the audio may be 
interrupted during playback. Check the operating 
instructions of the connected device and the connection to 
the device.
Playback does not start.
≥Depending on your environment or connected devices, it 
may take some time.
The system control function is not working.
≥Connect the system connection cable to the system 
terminal [CONTROL2] of the SU-C700.
≥ Connect the coaxial digital cable to the digital audio input 
terminal [COAX2 IN] of the SU-C700.
The unit enters standby mode automatically.
≥Is the auto off function turned on? ( >14)
≥ If the SU-C700 is connected to this unit via the system 
control function, this unit may automatically enter standby 
mode when the SU-C700 enters standby mode. ( >9, 16)
Incorrect display or play does not start.
≥Make sure that the disc is compatible with this unit. ( >17)
≥ There is moisture on the lens. Wait for about an hour and 
then try again.
≥ Unfinalised CD-R and CD-RW cannot be played back. 
Playback takes time to start .
≥It may take some time for the disc to load if there are a lot 
of tracks or folders on it. 
The remote control does not work properly.
≥To avoid interference, please do not put any objects in front 
of signal sensor. ( >7)
≥ Change the remote control code if other products react to 
this remote control. ( >16)
≥ If the SU-C700/ST-C700 is selected for the device to be 
operated, press [CD] and retry the operation. ( >8)
≥ When this unit and the SU-C700 are connected with an 
audio cable, switch the input of the SU-C700 to “LINE”.
Pressing [DIMMER] changes the display, the light 
and the indicator brightness  of the SU-C700/ST-
C700.
≥ [DIMMER] works for the SU-C70 0/ST-C700 as well as this 
unit. Turn off the device that you want to maintain the 
brightness level of, and press [DIMMER]. The following messages or service numbers may appear 
on the unit’s display.
“Full”
≥
The number of programmed tracks is more than 25.
“Not Conditional”
≥The function you have tried to use is not available with the 
current settings. Check the steps and settings.
“No Disc”
≥Insert the disc to be played (> 11 ) .
“No File”
≥Insert the disc to be played (> 11 ) .
≥ Insert a disc that has MP3/WMA files on it (> 17).
“No Play”
≥A CD that is not in CD-DA , MP3 or WMA format is 
inserted. It cannot be played.
≥ Examine the content. You can only play supported format. 
(> 17)
“Reading”
≥The unit is checking the CD information. After this display 
has disappeared, start operating.
“Remote ” (“   ” stands for a number.)
≥ The remote control and this unit are using different codes. 
Change the code on the remote control.
– When “Remote 1” is displayed, press and hold [OK] and [1] for 
at least 4 seconds.
– When “Remote 2” is displayed, press and hold [OK] and [2] for  at least 4 seconds.
-- -- :-- --
≥ The display time is over 99 minutes and 59 seconds.
Disc
Remote control
（ Supplied with the SU-C700/ST-C700 ）
Messages
(18)
SL-C700-SQT0934.book  18 ページ  ２０１５年３月２４日　火曜日　午後５時３３分 
						

							19
English
Specifications
	
≥Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
*1 ISO9660 Level-1, Level-2, Joliet,Romeo Recommended single-session. Recommended finalized disc.
*2 ID3 tag: ver.2(2.2/2.3) and ver.1(1.0/1.1) supported
*3 Not support WMA9 Pro/WMA9 Lossless/WMA9 Voice. Not support fi le with DRM.
∫GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 10 W
Power consumption in standby mode Approx. 0.5 W
Power consumption in off mode Approx. 0.5 W
Dimensions (Wk Hk D) 340 mm k78 mm k295 mm (13
3/8qk 31/16qk 115/8q)
Mass (Weight) Approx. 5.2 kg (11.44 lbs)
Operating temperature range 0oC to r 40oC ( r32 oF to  r104 oF)
Operating humidity range 35 % to 80 % RH (no condensation)
∫TERMINALS SECTION
Analog output
LINE OUT Pin jack
Digital output
Optical digital output Optical terminal
Coaxial digital output Pin jack
System port System control ‰3.5 mm (
1/8q) jack
∫ DISC SECTION
Playable Disc (8 cm or 12 cm) CD, CD-R/RW (CD-DA, MP3*1, WMA*1)
MP3 MPEG-1 Audio Layer 3*
2
WMAWindows Media Audio9*3
Pick up
Wavelength 790 nm
Laser power CLASS 1
Channel 2ch (Stereo)
∫ANALOG OUTPUT SECTION
Channel 2ch
Output level LINE OUT 2.0 Vrms
Frequency response 2 Hz to 20 kHz (s0.5 dB)
THD+N 0.0018 % (1 kHz, 0 dB)
S/N 117 dB (IHF-A)
Dynamic range 100 dB (IHF-A)
(19)
SL-C700-SQT0934.book  19 ページ  ２０１５年３月２４日　火曜日　午後５時３３分 
						

							20
Limited Warranty (ONLY FOR U.S.A.)
Technics Products – Limited Warranty
Limited Warranty Coverage
(For USA Only)
If your product does not work properly because of a defect in m aterials or 
workmanship, Panasonic Corporation of North America (referred t o as “the 
warrantor”) will, for the length of the period indicated on the  chart below, which 
starts with the date of original purchase (“warranty period”),  at its option either (a) 
repair your product with new or refurbished parts, (b) replace  it with a new or a 
refurbished equivalent value pr oduct, or (c) refund your purcha se price. The 
decision to repair, replace or refund will be made by the warra ntor.
During the “Labor” warranty period there will be no charge for  labor. During the 
“Parts” warranty period, there  will be no charge for parts. This Limited Warranty 
excludes both parts and labor for non-rechargeable batteries, a ntennas, and 
cosmetic parts (cabinet). This warranty only applies to products purchased and 
serviced in the United States. This warranty is extended only t o the original 
purchaser of a new product which was not sold “as is”.
Mail-In Service--Online Repair Request
Online Repair Request
To submit a new repair request and for quick repair status visi t our Web Site at 
www.panasonic.com/support.
When shipping the unit, carefully pack, include all supplied ac cessories listed in 
the Owner’s Manual, and send it prepaid, adequately insured and  packed well in 
a carton box. When shipping Lithium Ion batteries please visit  our Web Site at 
www.panasonic.com/BatteryHandling
 as Panasonic is committed to 
providing the most up to date information.  Include a letter detailing the complaint, 
a return address and provide a daytime phone number where you c an be 
reached. A valid registered receipt is required under the Limit ed Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE 
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits and Exclusions
This warranty ONLY COVERS failures due to defects in materials  or 
workmanship, and DOES NOT COVER normal wear and tear or cosmeti c 
damage. The warranty ALSO DOES NOT COVER damages which occurred  in 
shipment, or failures which are caused by products not supplied  by the 
warrantor, or failures which result from accidents, misuse, abu se, neglect, 
mishandling, misapplication, alteration, faulty installation, 
set-up adjustments, misadjustm ent of consumer controls, imprope r 
maintenance, power line surge, lightning damage, modification,  introduction of 
sand, humidity or liquids, commercial use such as hotel, office , restaurant, or 
other business or rental use of the product, or service by anyo ne other than a 
Factory Service Center or other Authorized Servicer, or damage  that is 
attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER 
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS 
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes dam
ages for lost time, travel to and from the 
servicer, loss of or damage to media or images, data or other memory or 
recorded content. The items listed are not exclusive, but for i llustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY 
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED 
WARRANTY.
Some states do not allow the exclusion or limitation of inciden tal or 
consequential damages, or limitations on how long an implied wa rranty lasts, so 
the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also  have other rights 
which vary from state to state. If a problem with this product  develops during or 
after the warranty period, you may contact your dealer or Servi ce Center. If the 
problem is not handled to your satisfaction, then write to: Consumer Affairs Department
Panasonic Corporation of North America
661 Independence Pkwy 
Chesapeake, VA 23320
PARTS AND SERVICE, WHICH ARE NO T COVERED BY THIS LIMITED 
WARRANTY, ARE YOUR RESPONSIBILITY.
As of October 2014
Product or Part NamePartsLabor
Technics Stereo Integrated Amp
3 (three) years 3 (three) years
Technics Network Audio Player
Technics Speaker System
Technics Compact Disc Player 2 (two) years 2 (two) years
for all your Technics gear
Go to 
www.panasonic.com/accessories
Get everything you need to get the most out of 
your Technics products
Accessories & Parts for your Camera, Phone, A/V 
products, TV, Computers & Networking, Personal  Care, Home Appliances, Headphones, Baeries,  Backup Chargers & more…
Customer Services Directory
For Product Informaon, Operang Assistance, 
Parts, Owner’s Manuals, Dealer and Service info  go to www.panasonic.com/support
For the hearing or speech impaired TTY: 1- 877-833-8855
The model number and serial number of this product can be 
found on either the back or the bottom of the unit.
Please note them in the space  provided below and keep for 
future reference.
MODEL NUMBER
SL-C700
SERIAL NUMBER
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
(20)
SL-C700-SQT0934.book  20 ページ  ２０１５年３月２４日　火曜日　午後５時３３分