Technics Keyboard Sx Kn2400 Owers Manual

Part II Playing the rhythm
61QQTG0692
Playing the rhythm
The AUTO PLAY CHORD and the SYNCHRO
& BREAK turn on, and the sounds, effects,
volume balances, rhythm and tempo etc.
which are best suited for the selected music
style are automatically selected.
5.Play the keyboard.
When you specify a chord, the automatic
rhythm begins to play immediately.
Setup by era
You can select a style from a specific music era.
1.Press the MUSIC STYLIST button to turn it
on.
2.Select MUSICAL ERA.
The display looks...

Part II Playing the rhythm
62QQTG0692
Playing the rhythm
Music Style Arranger
The MUSIC STYLE ARRANGER helps you to make professional registration changes during your perfor-
mance. Select between four contrasting registrations at the push of a button, or let your instrument
change the registration automatically for you when you use FILL IN 1 or 2. The MUSIC STYLE
ARRANGER will also alter the accompaniment in character with the registration change creating a pol-
ished sounding arrangement.
How to use...

Part II Playing the rhythm
63QQTG0692
Playing the rhythm
How to change the music style 
during your performance
While you are playing the keyboard with the
MUSIC STYLE ARRANGER on, press the FILL
IN 1 or FILL IN 2 button.
Each time the FILL IN 1 button is pressed, the
FILL IN 1 pattern plays, and then the music
style changes in the 4 ➝ 3 ➝ 2 ➝ 1 order. And
each time the FILL IN 2 button is pressed, the
FILL IN 2 pattern plays, and then the style
changes in the 1 ➝ 2 ➝ 3 ➝ 4 order.




 
MUSIC STYLE...

Part II Playing the rhythm
64QQTG0692
Playing the rhythm
Panel Memory
PANEL MEMORY stores all the current panel settings so you can recall them at the push of a button.
How to store the panel settings
By storing all the panel settings you use for a
song in the same bank, for example, you can
switch from one panel setup to the next in a
flash.
1.Set up the desired panel settings (sounds, vol-
umes, etc.)
2.Press the BANK VIEW button to turn it on.
The BANK SELECT display appears.
3.Select the desired...

Part II Playing the rhythm
65QQTG0692
Playing the rhythm
Assign a name to the bank/memory
You can assign names to the banks and memo-
ries.
1.Select a bank or memory.
2.Use the PAGE buttons to go to the PAGE 2/2
page on the display.
3.Press the BANK NAMING button to assign a
name to the bank, or the MEMORY NAMING
button for the memory.
The display looks similar to the following.
4.Use the buttons below the display to assign a
name.
Set the character input position with the POSI-
TION buttons, select...

Part II Playing the rhythm
66QQTG0692
Playing the rhythm
PANEL MEMORY mode
You can define which panel settings are recalled
when the PANEL MEMORY is used.
1.Press and hold the SET button for a few sec-
onds.
The display changes to the following.
2.Select the mode.
NORMAL: 
The sounds and volume balance, and CON-
DUCTOR status are stored.
EXPAND: 
All the instrument’s settings are stored, includ-
ing the rhythm (except for SOUND AR-
RANGER on/off status), TRANSPOSE,
tempo, etc.
After a few seconds, the...

67QQTG0692
Performance Pads
Part III   Performance Pads
Playing phrases
During your performance, you can insert a short recorded phrase or effect sounds by pressing a pad but-
ton. A different group of phrases is recorded in each bank.
1.Press the BANK button.
2.Select the desired bank from the display.
• The list of banks consists of three screen
pages. Use the PAGE buttons to change the
page.
 “User Bank” A, B and C are for storing your
original phrases.
 “Compile Bank” 1 and 2 are for assigning...

Part III Peformance Pads
68QQTG0692
Performance Pads
AUTO SETTING
When this button is set to on, the bank automati-
cally changes according to the automatic setting
functions in the ONE TOUCH PLAY, the MUSIC
STYLE ARRANGER and the MUSIC STYLIST.
When it is set to off, the bank does not automati-
cally change according to these functions.
Copying phrases
You can copy the desired data, as phrases, from the SEQUENCER to each pad memory of a “User
Bank”.
Chord data also can be copied to pad buttons 5 and 6...

Part III Peformance Pads
69QQTG0692
Performance Pads
SEQ TO PAD COPY
1.Record a phrase in the SEQUENCER, or load
data from a disk.
After this procedure, please do not change the
song number.
For details about SEQUENCER operation,
refer to page 73.
For information about loading data, refer to
pages 120, 133.
2.Press the PROGRAM MENUS button to turn it
on.
3.Select PERFORMANCE PADS.
4.Select SEQ TO PAD COPY.
The display looks similar to the following.
5.Select the measures of SEQUENCER data
you wish to...

Part III Peformance Pads
70QQTG0692
Performance Pads
Compile
You can assign desired phrases from different banks in “Compile Bank” 1 and 2.
1.Press the PROGRAM MENUS button to turn it
on.
The display looks similar to the following.
2.Select PERFORMANCE PADS.
The display looks similar to the following.
3.Select COMPILE SET.
The display looks similar to the following.
You can press the NAMING button and assign
a name to the bank.
4.Press the BANK button to select a bank (Com-
pile Bank: 1/2).
5.Use the...