Technics Keyboard Sx Kn2400 Owers Manual

Part V Composer
111QQTG0692
Composer
Playback
1.In the RHYTHM GROUP section, press the
MEMORY button. The display looks similar to the following.
2.Select the desired memory (A/B/C).
3.Use the VARIATION buttons to select a varia-
tion.
4.Press the START/STOP button.
 The DRUMS part begins to play back.
 The BASS and ACCOMP parts are played
back when you use the AUTO PLAY CHORD.
Step Record
Use STEP RECORD to store the notes one-by-one on the display. This is a convenient way to store com-
plicated...

Part V Composer
112QQTG0692
Composer
5.Use the PHRS ∧ and ∨ buttons to specify the
actual length of the produced sound for the
desired legato or staccato effect.
6.Specify the pitch and velocity of the note by
playing the keyboard.
The dot on the display where the note is
stored changes to a 
∗ mark.
When recording chords, you can store multiple
notes at one position.
REST: To store a rest, after specifying the note
LENGTH, press the REST button.
Positions at which nothing is stored are read
as...

Part V Composer
113QQTG0692
Composer
MEASURE COPY
Copy recorded data of specified measures to a
specified point.
On the destination track, the new data
replaces the current measure contents.
1.Specify the measures you wish to copy from
the source track (FROM).
On the FROM side, specify the settings with
the corresponding buttons.
PART: 
Select the part to copy from. (If ALL is
selected, all parts are copied.)
FIRST MEASURE: 
Specify the first measure to copy.
LAST MEASURE: 
Specify the last measure to...

Part V Composer
114QQTG0692
Composer
MEASURE DELETE
Delete specified measures from all parts at once.
The length of the performance accordingly
decreases by the number of deleted mea-
sures.
1.Use the FIRST MEASURE ∧ and ∨ buttons, to
specify the first measure to delete.
2.Use the LAST MEASURE ∧ and ∨ buttons to
specify the last measure to delete.
One measure is the smallest unit that can be
deleted.
3.Press the OK button.
The confirmation display appears. Press the
YES button to execute the function,...

Part V Composer
115QQTG0692
Composer
Pattern Copy
Use this function to copy a pattern from a rhythm or from SEQUENCER data.
PATTERN COPY
Copy a rhythm to the COMPOSER.
You can also copy a pattern from the
MEMORY.
1.On the COMPOSER MENU display, select
PATTERN COPY.
The display looks similar to the following.
2.Select the pattern you wish to copy.
In the FROM box, specify the settings with the
corresponding buttons.
GROUP: Group name
RHYTHM: Rhythm name
PATTERN: Pattern name
If ALL is selected, all...

Part V Composer
116QQTG0692
Composer
SEQ TO COMPOSER COPY
Data from the SEQUENCER can be copied to a
COMPOSER memory. For example, you can
use a rhythm pattern on a song disk as the auto-
matic accompaniment for your own performance.
1.Play back the song you wish to copy from
SEQUENCER to confirm the tracks, the mea-
sures and the time signature you wish to copy.
2.Follow the procedure in “Prepare to record” to
prepare the COMPOSER memory you will be
copying to. (Refer to page 106.)
Be sure that time...

117QQTG0692
Disk Drive (KN2400)
Part VI   Disk Drive (KN2400)
Outline of the Disk Drive function
The Disk Drive enables you to store recorded and stored data from this instrument’s memories on disks,
as well as play commercial recorded disks on this instrument.
Internal memory and Disk Drive
The storable internal memory of this instrument
as well as the backup time are limited. However,
the Disk Drive maximizes your control of data
management by allowing you to store (SAVE)
this instrument’s data on...

Part VI Disk Drive (KN2400)
118QQTG0692
Disk Drive (KN2400)
Using commercial song disks
Not only disks recorded on this instrument, but
also data from commercial song disks can be
read on this instrument.
This instrument accepts the following file for-
mats:




 
Loading Technics File format disks
Using Technics file format disks allows you load
new SOUND EDIT, rhythm & accompaniments,
PANEL MEMORY, PERFORMANCE PADS and
Song data into your instrument to expand its
potential even further.




 
About...

Part VI Disk Drive (KN2400)
119QQTG0692
Disk Drive (KN2400)
Outline of the procedure
1.Insert the disk into the Disk Drive slot. Push it
all the way in until you hear a click.
On this instrument, if the normal display is
active, it automatically changes to the DISK
MENU display when a disk is inserted into the
Disk Drive (initialized settings). The PREFER-
ENCES menu is used to specify which display
is shown when a disk is inserted.
2.Select a menu on the DISK MENU display.
If the DISK MENU display...

Part VI Disk Drive (KN2400)
120QQTG0692
Disk Drive (KN2400)
Loading data
Recall (load) the data from the disk to this instrument’s memories.
Note that the load procedure causes any data which is currently stored in the relevant memories to be
erased.
LOAD
Load data that saved to a disk into this instru-
ment’s memory.
1.Insert the disk with the stored data into the
Disk Drive. Push it all the way in until you hear
a click.
2.On the DISK MENU display, select LOAD.
The display looks similar to the...