Technics Keyboard Sx Kn2400 Owers Manual

Part VI Disk Drive (KN2400)
121QQTG0692
Disk Drive (KN2400)




 
SINGLE LOAD
You can specify which data to load from a disk
into a specific PANEL MEMORY, COMPOSER
(MEMORY), SOUND MEMORY, EFFECT
MEMORY or SEQUENCER (when SONG SAVE
was executed) memory.
1.Use the PAGE buttons to access the PAGE 
3/3 SINGLE LOAD display.
The display looks similar to the following.
2.Use the MODE button to select the data you
wish to load.
3.Use the BANK/SINGLE button to select the
load increment. (except for SEQUENCER)...

Part VI Disk Drive (KN2400)
122QQTG0692
Disk Drive (KN2400)




 
COMPOSER LOAD
Load COMPOSER data only from a disk.
1.In the RHYTHM GROUP section, press and
hold the LOAD (MEMORY) button for a few
seconds.The display looks similar to the following.
2.Select the name of the file you wish to load.
3.Press the LOAD button.
Data is loaded to this instrument’s COM-
POSER memory (MEMORY).
Direct Play
You can enjoy immediate playback of “Standard MIDI File” (SMF), “Disk Orchestra Collection” (DOC) and...

Part VI Disk Drive (KN2400)
123QQTG0692
Disk Drive (KN2400)




 
The display during playback

During playback, the buttons below the display
are used for player functions such as fast for-
ward, pause, etc.
During playback, if you press the MIXER but-
ton you can change the settings for each part.
If you press the MIC button during playback,
the display changes to the MIC REVERB &
EFFECT setting display.
For SMF disks:
For “SMF with LYRICS” disks, by pressing the
LYRICS button, the lyrics are shown...

Part VI Disk Drive (KN2400)
124QQTG0692
Disk Drive (KN2400)
Song Medley
Songs saved from the SEQUENCER to a disk (disk data) in the TECHNICS FORMAT can be played back
in a medley.
1.On the DISK MENU display, select SONG
MEDLEY from the display.
The display looks similar to the following.
2.Select the order of files in the medley.
If ALL is pressed, all the files are selected, and
the songs are played back in numerical in a
medley.
You can select a file and song, then press the
ADD button to add it to...

Part VI Disk Drive (KN2400)
125QQTG0692
Disk Drive (KN2400)
Saving data
The recorded data and panel settings of this instrument can be saved on a disk.
Disks
You can use 3.5 inch 2DD (720KB) or 2HD
(1.44MB) disks.
How to distinguish the two disk types:
Although 2HD disks can hold more data and
are convenient for quick loading and saving,
some models may be able to read only 2DD
disks. Therefore, you may not be able to use
your 2HD disk data with other musical instru-
ment models.When saving data to...

Part VI Disk Drive (KN2400)
126QQTG0692
Disk Drive (KN2400)




 
TECHNICS FORMAT
1.Use the buttons below the display to specify
the file number you wish to save to.
• The types of data that can be saved are
shown in a frame on the right side of the
display. If you press the SAVE button, all the
indicated data is saved. Ordinarily PERFOR-
MANCE data is selected, but you can use the
SAVE OPTION to select specific data to save.
2.If you wish to assign a name to the file, press
the NAME button.
 The...

Part VI Disk Drive (KN2400)
127QQTG0692
Disk Drive (KN2400)

You can specify a single song in the
SEQUENCER to save to the disk.
1.Use the PAGE buttons to access the 3/3
SEQUENCER SONG SAVE display.
The display looks similar to the following.
2.Use the buttons below the display to select the
song number you wish to save.
3.Press the SAVE button.
The SAVE operation begins.




 
SMF FORMAT 0
This instrument’s SEQUENCER data can be
saved in the “Standard MIDI File” format (FOR-
MAT 0) for use on other...

Part VI Disk Drive (KN2400)
128QQTG0692
Disk Drive (KN2400)
7.Use the 1 MEASURE SPACE buttons to
select ON or OFF.
ON: 
A one-measure space is added to the
beginning of the file.
OFF: 
No space is added.
When there is various data other than perfor-
mance data stored at the beginning of a file,
the start of playback may be delayed. This can
be avoided by set the 1 MEASURE SPACE to
ON to inserting a before the beginning of the
performance.
When set to ON, a space is added each time a
file is saved....

Part VI Disk Drive (KN2400)
129QQTG0692
Disk Drive (KN2400)
Note that this procedure clears any data which
is currently stored on the disk.
1.Select the type of format (2DD or 2HD).
Be sure to select the type which is the same
as your disk type.
If the type is automatically detected, the dis-
play changes directly to the following display,
without showing the type select display.
The display looks similar to the following.
If you wish to select the type again, use the
PAGE button to access the PAGE...

Part VI Disk Drive (KN2400)
130QQTG0692
Disk Drive (KN2400)
Set the automatic display when a disk is 
inserted
When a disk is inserted in the Disk Drive, the display automatically changes to a disk-procedure display.
Follow this procedure to customize the automatic display.
PREFERENCES
1.On the DISK MENU display, select PREFER-
ENCES.
The display looks similar to the following.
2.Use the buttons to the left of the display to
select the item, and the 
∧ and ∨ buttons to
change the setting.
DISK INSERT...