Technics Keyboard Sx Kn2400 Owers Manual

31QQTG0692
About the dispoay




 
OTHER PARTS/TR
By the pressing the OTHER PARTS/TR button,
the screen sequentially switches to the respec-
tive volume balance screens of the play part,
auto accompaniment part, playback part (1 to 8),
and playback part (9 to 16). The playback part(PT) is used to playback recording and song
data.
When there are other parts or tracks to
access, the OTHER PARTS/TR indicator is lit.
PAGE
When there are additional parts to the current
display, a page number indication, for...

32QQTG0692
About the display
Setting display
When you select an item from the menu display,
the setting display for the item is shown.
The buttons to the right, left and/or directly below
the display are used to select and adjust the set-
tings.




 
Example of setting display: MASTER 
TUNING
Press the button corresponding to the 
∧ or ∨ but-
ton on the display to change the value.
In this manual, this procedure is written as fol-
lows: “Use the 
∧ and ∨ buttons to adjust the
pitch.”
TEMPO/PROGRAM 
If...

33QQTG0692
About the dispoay
HELP
You can find an explanation of each button’s
function on the display.
1.Press the HELP button.
The following display appears.
2.Use the buttons below the display to select a
language.
3.Press the OK button.
4.Press a button on the panel whose explana-
tion you wish to read.An explanation of the button’s function is
shown on the display.
5.Press the HELP button again to exit the help
mode.
Attention display messages and error mes-
sages are also shown in the selected...

34QQTG0692
About the display
4.While pressing the SET button, specify where
you wish to paste (put) the item.
While the SET button is depressed, the dis-
play appears as shown below. Use the but-
tons to the left and right of the display to
specify where you wish to paste the item.5.Repeat steps 3 and 4 to create the display you
want.
There are nine settable items on the display.
6.On the FAVORITES SETTINGS display,
press the OK button.
Your customized display is stored.




 
Recall a FAVORITES...

35QQTG0692
Sounds and effects
Part I   Sounds and effects
Overview of sounds and effects
The following is an overview of the sound parts of this instrument.
NX SOUND
NX SOUND is the Technics original sound gen-
erator format which evokes realtime perform-
ance quality and expressive power, and
dramatically expands the number of sounds
and effects generated. This format includes
GM2 (General MIDI Level 2), and make various
controls possible when data is created and
reproduced by computer. 
• For...

Part I Sounds and effects
36QQTG0692
Sounds and effects
Selecting sounds
Select the sounds for the three parts you can play on the keyboard—RIGHT 1, RIGHT 2 and LEFT. After
first selecting a part and a SOUND GROUP, choose the desired sound from the display.
Select a sound
1.In the PART SELECT section, choose RIGHT
1, RIGHT 2 or LEFT.
The CONDUCTOR buttons are used to spec-
ify which part is heard. (Refer to page 39.)
 For the RIGHT 1 and RIGHT 2 parts, when a
CONDUCTOR button is selected, the corre-...

Part I Sounds and effects
37QQTG0692
Sounds and effects
SOUND EXPLORER
This is a convenient feature for finding the sound
you want from the many available sounds.
1.In the PART SELECT section, choose RIGHT
1, RIGHT 2 or LEFT.
2.Press the SOUND EXPLORER button to turn
it on..
3.Use the GRP ∧ and ∨ buttons to select a
GROUP of sound.
4.Use the buttons on both side of the display to
select the sound.
The numerical value that is displayed for each
sound is the MIDI [BANK MSB, LSB]-PRO-
GRAM CHANGE number....

Part I Sounds and effects
38QQTG0692
Sounds and effects




 
Change the sound type
Use the  / 
button to select the type of sound.




 
PERCUSSIVE TONE
PERCUSSIVE TONE adds a tone with a fast ini-
tial attack to the drawbar sounds. You can select
two pitch levels of attack tones.
Use the PERCUSSIVE TONE 2 2/3’ and 4’ but-
tons to turn the respective tone on or off.




 
TREMOLO
Tremolo is a rapid oscillation in volume, like the
effect of a rotating speaker. The tremolo speed
can be changed while you...

Part I Sounds and effects
39QQTG0692
Sounds and effects
Assigning parts to
 the keyboard
The CONDUCTOR buttons are used to assign the parts (RIGHT 1, RIGHT 2, LEFT) to the keyboard in
many different ways. For example, you can split the keyboard into right and left sections (SPLIT), and
assign a different sound to each section.
CONDUCTOR
The volume for each part can be adjusted independently. (Refer to page 30.)
The following conditions are in effect when the AUTO PLAY CHORD is used.
—BASIC, ADVANCED...

Part I Sounds and effects
40QQTG0692
Sounds and effects
SPLIT POINT
When the keyboard is split into left and right sec-
tions, the split point is usually C3.




 
Customized split point
Use the following procedure if you wish to store a
split point at a location other than C3.
1.Press the SPLIT POINT button.
The following display appears.
2.Press a key on the keyboard to specify the
desired split point.
A split point is set at the location of the
pressed key, and is indicated on the keyboard...