Home > Tascam > Recording Equipment > Tascam TM-D1000 Operations Manual

Tascam TM-D1000 Operations Manual

Add to Favourites
    Download as PDF

    View the Tascam TM-D1000 Operations Manual for free. All the Tascam manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 1 TASCAM TM-D1000 Operations Manual 1 - TM-D1000 Operations Manual Congratulations on your purchase of the TM-D1000. This high-quality digital mixing console allows you to produce crystal-clear multitrack recordings and to mix them to a digital stereo mastering machine. We do not expect you to read the Reference Manual from cover to cover, but if you take the time to read through this Operations Manual, this will be repaid in terms of future familiarity with the unit. Since the TM-D1000 is a...
    Page 2 1 - TM-D1000 Operations Manual TASCAM TM-D1000 Operations Manual 2 NOTE When referring to named parts of the TM- D1000, we will use the following typeface: CH SEL (or CH SEL in notes, etc.). When referring to words, etc. shown on the display, we will use the following typeface: Option. 1.2 TM-D1000 features Among other features, the TM-D1000 includes: ¥ Eight analog inputs, capable of accepting input from a variety of sources, from professional line level to standard dynamic microphones. Four of...
    Page 3 1 - TM-D1000 Operations Manual 3 TASCAM TM-D1000 Operations Manual WARNING Although it is possible to connect equipment using the XLR and phone connectors at the same time to input channels 1 through 4, we do not recommend that you do this. There is a risk of damage to the microphone, due to sig- nals received at the phone jack being re- transmitted to the XLR jack. 1.3.2 PHANTOM (+48V) The PHANTOM power switch by the XLR jack of channel 4 provides phantom power at +48 V to the XLR jacks of...
    Page 4 1 - TM-D1000 Operations Manual TASCAM TM-D1000 Operations Manual 4 1.3.10MIDI IN & OUT These MIDI connectors are used for control by an external sequencer, etc., as well as for receiving MIDI timecode and transmitting MIDI Machine Control commands to external equipment. See ÒMIDI Machine controlÓ on page 29, ÒLoca- tionsÓ on page 30 and ÒMIDI control of the TM- D1000Ó on page 32 for further details of MIDI func- tions and the TM-D1000. 1.3.11DIGITAL OUTPUTS There are two pairs of digital outputs...
    Start reading Tascam TM-D1000 Operations Manual

    Related Manuals for Tascam TM-D1000 Operations Manual

    All Tascam manuals