Home > Tascam > Recording Equipment > Tascam 2488 MIDI Control Manual

Tascam 2488 MIDI Control Manual

Add to Favourites
    Download as PDF

    View the Tascam 2488 MIDI Control Manual for free. All the Tascam manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 2488 Digital Portastudio™ MIDI Parameter Mapping v0.2 - April 15, 2004 pkillianey@tascam.com THIS DOCUMENT IS FOR EXPERIENCED MIDI USERS ONLY. This document is written under the presumption that the reader has created a MIDI controller maps in the past, or has the equivalent understanding of MIDI controllers. This allows the advanced user to cut to the chase on the programming, rather than scan past pages of minutae on what controllers are, what parameter ranges are, etc. If you are a beginner on this...
    Page 2 Setting the 2488 for External MIDI Control MENU > SYNC/MIDI > REMOTE This menu decides what external control is going to be allowed. The key settings for external MIDI control are: MIDI IN - Selects target for incoming MIDI note messages and control parameters MODE: OFF: Ignores messages TG: Sends all messages to the internal General MIDI Chip REMOTE: Interprets incoming messages for mixer automation REMOTE CONTROL - Enables/Disables Specific MIDI Messages PROGRAM CHANGE SCENE: Allows scene libraries to...
    Page 3 2488 Parameter Banking One of the challenges in the 2488 was to overcome the mismatch between mixer channels and MIDI channels. The 2488 actually has 32 channels, and there are only 16 MIDI channels. The engineers dealt with this by offering a special MIDI command to shift the target of the MIDI commands in blocks of 8 channels. This banking concept is used not only with mixer channels, but also with varoious effect processors, and other functions. (The various bank switches do not affect each other...
    Page 4 Mixer Channel Controls Mixer channels 1-24 and inputs A-H all offer individual control, using the bank switching method explained previously. The parameters are listed in the chart on the next page. Some key notes on it are below. Tone Generator - Does Not Bank You may notice that the Tone Generator mixer channel also offers the same functions, including the 3-band EQ, effect sends, volume, etc. The audio channel for the tone generator will receive MIDI control messages on channel 13 at any time,...
    Start reading Tascam 2488 MIDI Control Manual

    Related Manuals for Tascam 2488 MIDI Control Manual

    All Tascam manuals