Tascam Cd Recorder/duplicator Cd-rw402 Owners Manual
Here you can view all the pages of manual Tascam Cd Recorder/duplicator Cd-rw402 Owners Manual. The Tascam manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 51
9 – External control—CONTROL I/O TASCAM CD-RW402 Owner’s Manual 51 CONTROL I/O This connector allows for remote control by suitably- equipped units, and provides tally information to such units. The total current of pin 6 (+5 V) and pin 8 must be less than 100 mA.Input signals are active when grounded for at least 30 ms. Output signals are connected to an open collector with maximum voltage 15 V, and maximum current 50 mA. Pin Signal name IN/OUT 1 PLAY command (drive 2)IN 2 STOP command (drive...
Page 52
52 TASCAM CD-RW402 Owner’s Manual 10 – Specifications, etc. This section gives the specifications of the unit, as well as information on error messages, etc. Error messages and troubleshooting The messages below do not indicate an error, but are status messages which show the current operations being performed on the appropriate drive: The following messages typically indicate an error condition, or a condition which requires attention: Message Meaning Check Stop!! The extended recording check has...
Page 53
10 – Specifications, etc.—Specifications TASCAM CD-RW402 Owner’s Manual 53 Specifications Drive 1 Drive 2 CopyReadErr! There is an error in reading the source disc in a copy operation. TEXT FULL! The text buffer for CD TEXT is full. No more can be entered. POINT ERROR! An error has been made when attempting to use the location points when edit- ing the TOC of a disc. CantCompare! Comparison between the original and copy disc is not possible as the destina- tion disc contains an audio track COMPARE ERR!...
Page 54
10 – Specifications, etc.—Specifications 54 TASCAM CD-RW402 Owner’s Manual Digital I/O Analog I/O Control Digital inputs (drive 2 only) COAXIAL RCA pin, IEC-60958 TYPE I, TYPE II — auto-detect OPTICAL TOSLINK, IEC-60958 TYPE I, TYPE II — auto-detect Digital outputs (drives 1 and 2) COAXIAL RCA pin, IEC-60958 TYPE II (SPDIF) OPTICAL TOSLINK, IEC-60958 TYPE II (SPDIF) UNBALANCED LINE OUTPUTS (1, 2, COMMON)Unbalanced RCA Nominal output level–10 dBV (FS –16 dB) Maximum output level +6 dBV Output impedance...
Page 55
10 – Specifications, etc.—Specifications TASCAM CD-RW402 Owner’s Manual 55 General specifications Dimensional drawing Voltage requirements USA/Canada 120 VAC, 60 Hz U.K./Europe 230 VAC, 50 Hz Australia 240 VAC, 50 Hz Power consumption 100 V — 120 V: 34 W, 220 V — 240 V: 39 W Applicable electromagnetic environment E4 Peak inrush current 6.1 A (Pro CE) Dimensions 483 x 138 x 301 (mm) 19 x 5.4 x 11.6 (in) Weight 8 kg (17.6 lb.) Operating temperature 5°C to 35°C (41°F to 95°F) Supplied accessories RC-RW402...
Page 56
TEAC CORPORATION Phone: (0422) 52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC.Phone: (323) 726-0303 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD.Phone: 905-890-8008 Facsimile: 905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.A. De C.VPhone: 5-851-5500 Campesinos No. 184, Colonia Granjes Esmeralda, Delegaacion Iztapalapa CP 09810, Mexico DF TEAC UK LIMITEDPhone: 01923-819699 5 Marlin House, Croxley Business Park,...