Studio Experience Projector Premier 30hd User Manual
Have a look at the manual Studio Experience Projector Premier 30hd User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 12 Studio Experience manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Appendix 59 Connecting Pin Assignments DVI-D port: 25 pin connector • DVI Digital INPUT RS-232C Port: 9-pin D-sub Female connector of the DIN-D-sub RS-232C cable Pin No.SignalPin No.Signal 1T.M.D.S data 2-16Hot plug detection2T.M.D.S data 2+17T.M.D.S data 0–3T.M.D.S data 2 shield18T.M.D.S data 0+4Not connected19T.M.D.S data 0 shield5Not connected20Not connected6DDC clock21Not connected7DDC data22T.M.D.S clock shield8Not connected23T.M.D.S clock+9T.M.D.S data 1–24T.M.D.S clock–10T.M.D.S data 1+C1Ground11T.M.D.S data 1 shield12Not connected13Not connected14+5V power from graphic card. 15Ground Pin No.SignalNameI/OReference 1Not connected2SDSend DataOutputConnected to internal circuit3RDReceive DataInputConnected to internal circuit4Not connected5SGSignal GroundConnected to internal circuit6Not connected7Not connected8Not connected9Not connected 168 7 ~ 2 1 ~ ~ 24 2318 17 9 C1 4321 9 876 5
60 Appendix Computer Compatibility Chart Computer • Multiple signal support Horizontal Frequency: 25–75 kHz, Vertical Frequency: 50–85 Hz, Pixel Clock: 25–108 MHz • Compatible with sync on green and composite sync signals • XGA compatible with advanced intelligent compression The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. PC/MAC/WSResolutionHorizontal Frequency (kHz)Ve r t i c a l Frequency (kHz)VESA StandardDVI Sup-portDisplay PCVGA 640 x 35027.060 Upscale 31.57037.9853 720 x 35027.06031.570 640 x 40027.060331.570337.98533 720 x 40027.060331.570337.98533 640 x 480 26.250331.560336.870337.9723337.5753343.3853347.990353.01003 PC/MAC/WSResolutionHorizontal Frequency (kHz)Ve r t i c a l Frequency (kHz)VESA StandardDVI Sup-portDisplay PC SVGA800 x 600 31.4503 Upscale 35.1563337.9603344.570348.1723346.9753353.7853356.890364.01003 XGA1024 x 768 35.5433 True 40.350348.4603356.5703360.0753368.7853373.590377.296380.61003MAC 13”VGA640 x 48034.967UpscaleMAC 16”SVGA832 x 62449.675 MAC 19”XGA1024 x 76848.4603True Note • This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this occur, turn off the LCD display on the notebook computer and output the display data in “CRT only” mode. Details on how to change display modes can be found in your notebook computer’s operation manual. • When this projector receives 640 × 350 VESA format VGA signals, “640 × 400” appears on the screen. • When projecting video images of an interlace video signal with the projector, the intended image may not be projected depending on the video signal when using the RBG input. In such cases, use the component input, S-video input or video input.
Appendix 61 Video Compatibility Chart 1. Component 1/2 support signal formats are Y/Pb/Pr, Y/Cb/Cr2. VGA port support signal formats are RGsyncB, RGBHV or RGBCsysc3. “U” means manual setting is needed DTV Troubleshooting ResolutionH-Freq (kHz)V-Freq (Hz)Comp1 SupportComp2 SupportS-Video SupportCompos-ite SupportVGASupportDVISupport SD VideoNTSC640x480i15.7359.94/603333 PA L768x576i15.63503333 SECAM768x576i15.63503333 NTSC-4.43UUUU PA L - MUUUU PA L - NUUUU NTSC-JUUUU PAL-60UUUU NTSC-50 ED TV480P720x480P31.559.94/603333 576P720x576P31.3503333 HD TV1080i/501920x1080i33.8503333 1080i/601920x1080i28.159.94/603333 720P/501280x720P37.5503333 720P/601280x720P45.059.94/603333 HTPC720P/481280x720P48 720P/751280x720P75 SignalHorizontal Frequency (kHz)Vertical Frequency (Hz)DVI Support 480I15.860 480P31.5603 576I15.650 576P31.3503 720P45.0603 720P37.5503 1080I33.8603 1080I28.1503 ProblemCheck Projector does not start Projector power cord is not plugged into the wall outlet. Remote control batteries have run out. No picture The selected input mode is wrong. Cables may be incorrectly connected to the rear panel of the projector. Power to the external connected device is off. The video signal format of the video equipment is not set correctly.
62 Appendix Color is faded Picture adjustments are incorrectly set. Picture is blurred Adjust the focus The projection distance exceeds the focus range. Picture noise appears. (PC input only) Perform Fine Sync adjustments (Execute Auto tune) Perform Fine Sync adjustments (Clock adjustment) also in component Perform Fine Sync adjustments (Phase adjustment) also in component Picture is green on INPUT1 or 2 COMPONENT Change the input signal type of the video equipment. Picture is dark or bright and whitish Picture adjustments are incorrectly set. Picture is too bright and whitish Picture adjustments are incorrectly set.
Appendix 63 Product Specifications ItemDescription Model No.Matterhorn DLP Front Projector DLP PanelPanel size: 0.63 W-PAL Display method: DMD by Texas Instruments Device method: Digital Light Processing (DLPTM) Display TypeDLP Chip, RGB optical shutter method Resolution1024 x 576 pixels Lens1-1.25 x zoom lens, F2.4~2.5, f= 19.1~23.9 mm Projection Lamp250 W / 200 W switchable UHP lamp Input SourcesVideo VGA YCbCr, YPbPr CVBS (Composite Video) S-Video DVI-D Control RS-232 (For computer) IR Receiver (For remote) Computer CompatibilityVGA,SVGA, XGA 2D Lens Shift AbilityUp/Down: ± 100% Left/Right: ± 15% Brightness800 ANSI Lumen - Bright Mode Digital Keystone Correction± 15° Vertical / Horizontal correction (Estimated) Projection LensZoom lens with manual focus and manual zoom adjust Contrast Ratio2500:1 Uniformity90% Screen Size30 ~ 300 inches Throw Ratio (16:9)1.34:1 ~ 1.68:1 Aspect Ratio16:9 Native Projection Distance in 100”3 m ~ 3.72 m Video Enhance4-Line Y/C separation(2D) DLTi, DCTi Projection MethodFront / Rear, Desktop / Ceiling OSD ControlProjector keypad IR remote control Video systemNTSC 3.58 / NTSC 4.43 / PAL / PAL-M / PAL-N / PAL 60 / SECAM / EDTV480P /EDTV576P/HDTV720P /HDTV1080I Dimensions342 mm x 307 mm x 144 mm (13.5 x 12 x 5.6)(W x L x H) Weight14 lbs Power Supply100 ~ 240 V at 50 ~ 60 Hz Power Consumption370 W (Standby mode < 5W) Operating Temperature5°C to 35°C Audible Noise32 dba (ECO mode) Lamp Warranty90 days or 500 hours Product Warranty2 years parts Specifications are subjected to change without notice.
64 Appendix Dimensions Units: inches (mm) Temp ledSTANDBY MENUINPUT KEYSTONE Focus Zoom LENS SHIFT(H)LENS SHIFT(V)ENTER307.1 mm 121 16inch 341.8 mm 13 7 16inch 144.8 mm511 16inch 125.7 mm4 15 16inch 160.8 mm65 16inch 283.4 mm 113 16inch 85.7 mm33 8inch 216.1 mm8 1 2inch 41.6 mm1 5 8inch 44.2 mm1 3 4inch 208.9 mm81 4inch 253.6 mm10 inch 127.4 mm5 inch 29.9 mm1 3 16inch 179.0 mm71 16inch 125.7 mm4 15 16inch216.1 mm8 1 2inch WARNING• Do not disassemble any components except the lamp chassis cover while replacing the lamp. • Do not touch ventilation slots, lamp and objects next to them until they have sufficiently cooled down. • Never insert any objects through ventilation holes. • Do not use this unit near water or in a rainy/moist environment.Made in Taiwan S-VIDEO VIDEO RS-232Pr/Cr Pb/Cb Y Pr/Cr Pb/CbYPCDVI Bottom View Front View Side ViewSide View Top View Rear View
LIMITED WARRANTY Boxlight (Boxlight) warrants that each Studio Experience Premiere 30HD (the Product) sold hereunder will conform to and function in accordance with the written specifications of Boxlight. Said limited warranty shall apply only to the first person or entity that purchases the Product for personal or business use and not for the purpose of distribution or resale. Said warranty shall continue for a period of three (3) years from the date of such purchase. The standard limited warranty excludes the lamps in projectors after 120 days or 500 hours (whichever comes first) and the accessories after one year. Boxlight does not warrant that the Product will meet the specific requirements of the first person or entity that purchases the Product for personal or business use. Boxlights liability for the breach of the foregoing limited warranty is limited to the repair or replacement of the Product or refund of the purchase price of the Product, at Boxlights sole option. Replacement Product may be re-furbished in like-new condition, at Boxlights sole discretion. To exercise the Purchasers rights under the foregoing warranty, the Product must be returned at the Purchasers sole cost and expense, to Boxlight or to any authorized Boxlight service center provided, and the Product must be accompanied by a written letter explaining the problem and which includes (i) proof of date of purchase; (ii) the dealers name; and (iii) the model and serial number of the Product. When sending your unit in for repair, please ship your unit in its original packing material or a Boxlight approved ATA Shipping Case, or have a professional packaging company pack the unit. Please insure your shipment for its full value. A return authorization number, issued by the Boxlight Customer Service department, must also be clearly displayed on the outside of the shipping carton containing the Product. WARRANTY LIMITATION AND EXCLUSION Boxlight shall have no further obligation under the foregoing limited warranty if the Product has been damaged due to abuse, misuse, neglect, accident, unusual physical or electrical stress (unusual physical and electrical stress includes unusually long operation, exposure to smoke and other airborne contaminants), unauthorized modifications, tampering, alterations, or service other than by Boxlight or its authorized agents, causes other than from ordinary use or failure to properly use the Product in the application for which said Product is intended. DISCLAIMER OF UNSTATED WARRANTIES THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER- CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE FACE HEREOF AND THE FOREGOING WARRANTY SHALL NOT BE EXTENDED, ALTERED OR VARIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY BOXLIGHT. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO YOU. LIMITATION OF LIABILITY IT IS UNDERSTOOD AND AGREED THAT BOXLIGHTS LIABILITY WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE RETURN OF THE AMOUNT OF THE PURCHASE PRICE PAID BY PURCHASER AND UNDER NO CIRCUMSTANCES SHALL BOXLIGHT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST PROFITS, LOST REVENUES OR LOST SAVINGS. THE PRICE STATED FOR THE PRODUCT IS A CONSIDERATION IN LIMITING BOXLIGHTS LIABIL-ITY. NO ACTION, REGARDLESS OF FORM, ARISING OUT OF THE AGREEMENT TO PURCHASE THE PRODUCT MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR AFTER THE CAUSE OF ACTION HAS ACCRUED. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM-AGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Boxlight Corporation 19332 Powder Hill Place Poulsbo, WA 98370-7407 USA www.boxlight.com USA and Canada 800-762-5757 International +1.360.779.7901 www.boxlight.com www.studioexperience.com