Studio Experience Projector Premier 30hd User Manual
Have a look at the manual Studio Experience Projector Premier 30hd User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 12 Studio Experience manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
29 Basic Operation Menu Bar Items This list shows the items that can be set in the projector. „Composite Video/S-Video, DVI Mode PictureBrightness -50 ~ +50 Contrast -50 ~ +50 Color -64 ~ +64 (DVI hide) Tint -64 ~ +64 (DVI hide) SharpnessSoftest, Soft, Normal, Sharp, Sharpest Gamma1.0/1.5/1.8/2.0/2.2/2.35/2.5/2.8 Color TempColor Temp 5000k ~ 10000k, Native x -30 ~ +30 y -30 ~ +30 Reset this CT Color TypeStandard/Custom1/Custom2/ Custom3 Target Color (B/C/G/Y/R/M) Lightness -64 ~ +63 Saturation -64 ~ 0 Tint -64 ~ +64 Reset (This color) Reset (All color) Picture SettingNormal/Bright/Movie/Custom1/ Custom2 Save this setting Reset LayoutAspect Ratio (720p, 1080i, Hide)Standard/Anamorphic/ Letterbox/Pixel to Pixel H-Position (DVI Hide) -16 ~ +16 V-Position (DVI Hide) -16 ~ +16 V-Keystone -128 ~ +127 (1080i Hide)Vertical Keystone Horizontal Keystone H-Keystone -128 ~ +127 (1080i Hide)Vertical Keystone Horizontal Keystone Reset OptionsWhite EnhanceON/OFF ECO modeON/OFF Auto Power OffON/OFF Source SelectManual/Auto OSD Timeout5. 15. 60 secs BackgroundBlue, Black OSD BlendingON/OFF PRJ ModeFront/Front ceiling/ Rear/Rear ceiling Deinterlace (Dvi Hide)DCTI0 ~ 7 Video on filmON/OFF Film Mode3:2@60Hz 2:2@50Hz 2:2@50Hz3:2@60Hz OFF Reset Lamp Timer Reset Status Input SourceS-Video Composite Component 1 Component 2 DVI PC LanguageEnglish Français Italiano Deutsch Español 中文 日本語 한국어 Factory Reset
30 Basic Operation „PC/Component 1&2 Mode PictureBrightness -50 ~ +50 Contrast -50 ~ +50 Color -64~+64 (PC Hide) Tint -64~+64 (PC Hide) SharpnessSoftest, Soft, Normal, Sharp, Sharpest Gamma1.0/1.5/1.8/2.0/2.2/2.35/2.5/2.8 Color TempColor Temp 5000k ~ 10000k, Native x -30 ~ +30 y -30 ~ +30 Reset this CT Color TypeStandard/Custom1/Custom2/ Custom3 Target Color (B/C/G/Y/R/M) Lightness -64 ~ +63 Saturation -64 ~ 0 Tint -64 ~ +64 Reset (This color) Reset (All color) Picture SettingNormal/Bright/Movie/Custom1/ Custom2 Save this setting Reset Fine SyncClock -50 ~ +50 (Component 1/2 Hide) Phase -16 ~ +15 Reset Execute Auto Tune Auto Tune (ON/OFF) LayoutAspect Ratio (720p, 1080i, Hide)Standard/Anamorphic/ Letterbox/Pixel to pixel H-Position -16 ~ +16 V-Position -16 ~ +16 V-Keystone -128 ~ +127 (1080i Hide)Vertical Keystone Horizontal Keystone H-Keystone -128 ~ +127 (1080i Hide)Vertical Keystone Horizontal Keystone Reset OptionsWhite EnhanceON/OFF ECO modeON/OFF Auto Power OffON/OFF Source SelectManual/Auto OSD Timeout5. 15. 60 secs BackgroundBlue, Black OSD BlendingON/OFF PRJ ModeFront/Front ceiling/ Rear/Rear ceiling Deinterlace (1080i, PC Hide)DCTI0 ~ 7 Video on filmON/OFF Film Mode3:2@60Hz 2:2@50Hz 2:2@50Hz3:2@60Hz OFF Reset Lamp Timer Reset Status Input SourceS-Video Composite Component 1 Component 2 DVI PC LanguageEnglish Français Italiano Deutsch Español 中文 日本語 한국어 Factory Reset
31 Basic Operation Using the Menu Screen This projector has one set of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following procedure. Menu Selections (Adjustments) 1Press on remote or on keypad. • The menu screen is displayed. Note • The “Picture” menu screen for the selected input mode is displayed. 2Press S or T to select the menu you want to adjust. 3Press X or to reach the Sub- menu and then press S or T to select the item you want to adjust. Note • The selected item will be highlighted. 4Press W or X to adjust the item selected. • The adjustment is stored. 5Press to return to “Main MENU”. 6Press , the menu screen will disappear. Main Menu COMPONENT 1 COMPONENT 2 VIDEO/S-VIDEO DVI/PC MENU button STATUS EXIT INPUTMENU ECO ENTER MENU button MENUMENU
32 Basic Operation Adjusting the Picture You can adjust the projectors picture to your preferences with the following picture settings. Adjusting Image Preferences Use this option to adjust the overall brightness of the image. Use this control in conjunction with contrast to fine-tune the display. The scale is from -50 to 50.The default setting is 0. Use this option to adjust the contrast of the image. Use this control in conjunction with contrast to fine-tune the display. The scale is from -50 to 50. The default setting is 0. Selected itemDescription BrightnessFor adjusting the brightness of an imageFor lower brightnessFor higher brightness ContrastFor adjusting the contrast levelFor lower contrastFor higher contrast ColorFor adjusting the color intensity of an imageFor lower color intensityFor higher color intensity TintFor adjusting the tones of an imageSkin tones become purplishSkin tones become greenish Brightness Contrast Main Menu
33 Basic Operation Use this option to adjust the color intensity of the image. Use this option to adjust the tint of your image. Press X to make the image more green. Press W to make the image more purple. Use this option to adjust the clarity and focus of the image. Use this option to set the color temperature of the image. Higher color temperatures make the image look cool with a bluish hue. Lower color temperature make the image look warmer with a reddish hue. The range is from 5000°K to 10000°K. The step is 500°K. When sets to NATIVE, the image has the maximum brightness. Select x, y to adjust the color temperature. For example : • When you adjust the x, X, y,W, the image will looks red. • When you adjust the x,W, y,W, the image will looks blue. • When you adjust the x,W, y,X, the image will looks green. • When you adjust the x, X, y, X, the image will looks yellow. Color Tint Sharpness Color TEMP The point will move in the Black Body Curve.
34 Basic Operation Use this option to adjust the gamma correction of the image. Default setting is 2.2. Gamma correction provides s even non-linear gamma corrections 1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, and 2.8. This function allows you to individually adjust the display characteristics of six colors (R:Red, Y:Yellow, G:Green, C:Cyan, B:Blue, M:Magenta). Gamma Color Type Color Type Mode Select “Color Type” from the picture menu on the menu screen,and then press Enter. For operating the menu screen, see page 31. Target color Select “Target color” from the “Color Ty p e" menu. Selected itemDescription StandardDefault setting Custom 1-3 “Lightness”, “Satura- tion”, and “Tint” can be adjusted for each of the six colors. BlueCyan GreenYe l l o w RedMagenta
35 Basic Operation Select “Lightness” from the “Color Ty p e ”menu. Select “Saturation” from the “Color Type” menu . Select “Tint” from the “Color Type” menu. Select “Reset (This Color)” or “Reset (All Colors)” from the “Color Type” menu on the menu screen. For operating the menu screen, see page 31. Lightness Saturation Tint Resetting User-Defined Color Settings Selected itemDescription Reset (This color) “Lightness” “Saturation” and “Tint” of the color selected for “Target” are reset. Reset (All colors) “Lightness” “Saturation” and “Tint” of all colors are reset.
36 Basic Operation Picture setting This function stores Brightness, Contrast, Color, Tint, Sharpness, Gamma, Color Temp, Color Type, and White Enhance set in “Picture”. Each stored setting is reassigned to each input mode. Select “Picture Setting” from the “Picture” menu on the menu screen. For operating the menu screen, see page 31. Note • When Recalling Saved Contents: When a saved memory number is selected, the contents of the “Picture” menu change to the adjustment values of the saved memory number. • When Editing Saved Contents: Edit the contents of the “Picture” menu after selecting the Memory number for which adjustment values are to be edited. Save this setting Use this option to save changes you made in “Picture setting” to custom 1 or custom 2. Reset Select this option to set to all items in the Picture menu to the factory default values. NormalBrightMovieCustom 1-2 Brightness05-10 Brightness, contrast, color, tint, sharpness, gamma, color temp, color type and white enhance of the color selected for “Target” are reset. Contrast0108 SharpnessNormalNormalNormal Color000 Tint000 GammaGamma2.2Gamma 1.8Gamma2.2 Color Temp8000K7500K6500K Color TypeStandardStandardStandard White EnhanceONONOFF
37 Basic Operation Adjusting Computer Images (Computer Source Signal Only) Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in portions of the screen. When Auto Tune is OFF When “Auto Tune” is “OFF”, interference such as flickering or vertical stripes may occur when displaying tilings or vertical stripes. Should this occur, adjust “Clock” and “Phase”, for obtaining an optimum image. Select “Clock”, “Phase”, in the “Fine Sync” menu on the menu screen. For operating the menu screen, see page 31. Auto Tune adjustment Used to automatically adjust a computer image. Select “Execute Auto Tune” from the “Fine Sync” menu on the menu screen. For operating the menu screen, see page 31. Screen display during Auto Tune Note • Auto Tune adjustment may take some time to complete, depending on the image stored in the computer connected to the projector. Selected itemDescription ClockAdjusts vertical noise. Phase Adjusts horizontal noise (similar to tracking on your VCR). Main Menu