Studio Experience Projector Premier 30hd User Manual
Here you can view all the pages of manual Studio Experience Projector Premier 30hd User Manual. The Studio Experience manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
Easy to Use Functions 39 Easy to Use Functions
Page 42
40 Easy to Use Functions Selecting the Picture Display Mode This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose “Standard”, “Letter Box”, “Anam orphic” or “Pixel to Pixel” image. Switching the Picture Display Using Different input signals Press on remote or on keypad and select layout. • Each time is pressed, the display changes as shown on page 41 and 42. Info • In the Pixel to Pixel Mode, images...
Page 43
Easy to Use Functions 41 VIDEO StandardLetterboxAnamorphicPixel to Pixel For 4:3aspect ratio 480i480P576i576PNTSCPA LSECAM 768X5761024X5761024X576 640X480i640X480P768X576i768X576P640X480768X576768X576 For 16:9aspect ratio 480P576P768X576768X5761024X5761024X5761024X576720X480720X576 720P--1024X576- 1080i--1024X576- Input SignalOutput screen image StandardLetterboxAnamorphicPixel to Pixel 480I 480P 576I 576P NTSC PA L SECAM For 4:3 aspect ratio Letter box image 1080I For 16:9 aspect...
Page 44
42 Easy to Use Functions . COMPUTER StandardAnamorphicPixel to Pixel For 4:3aspect ratio VGA(640X480)768X5761024X576640X480 SVGA(800X600)768X5761024X576800X600 XGA(1024X768)768X5761024X5761024X768 Input SignalOutput screen image StandardAnamorphicPixel to Pixel VGA For 4:3 aspect ratio (640x480) SVGA For 4:3 aspect ratio (800x600) XGA For 4:3 aspect ratio (1024x768)
Page 45
Easy to Use Functions 43 H-V Position Function This function enables you to center the display vertically and horizontally. 1Press “W” or “X” of the H Position, the display will move to the left or the right. 2Press “W” or “X” of the V Position, the display will move upward or downward. Main Menu Main Menu
Page 46
44 Easy to Use Functions H-V Keystone Function Correcting Trapezoidal Distortion and Adjusting Vertical Size of the picture. This function allows for Keystone correction. Note • When the image is projected either from top or from bottom toward the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. • The Keystone Correction can be adjusted up to angle of approximately ± 15 degrees. • “KEYSTONE” does not...
Page 47
Easy to Use Functions 45 White Enhance Selecting the Economy Mode These functions allow you to reduce the power consumption of the projector. Use this option to adjust: the color: white bright or dark. Note • ON Emphasizes the bright portions of images. • OFF Disables “White Enhance”. Setting the Power Save Select “ON” from the “Economy Mode” under the “Options” menu on the menu screen. For operating the menu screen, See page 31. Note • Although noise is reduced when “ECO” is set to “ON”,...
Page 48
46 Easy to Use Functions Automatic Power Off Function Source Select When an input signal is not detected or you dont press any input button on Keypad or remote for more than 15 minutes, the projector will automatically turn off if set to “ON”. Auto Power Off function will be disabled when it is set to “OFF”. Select “Auto Power Off” from the “Options” menu on the menu screen. For operating the menu screen, see page 31. Note • When the Auto Power Off function is set to “O N”, 5 minutes before...
Page 49
Easy to Use Functions 47 OSD Timeout Setting a Background Image This function allows you to select the image displayed when a signal is not being sent to the projector. OSD Timeout is used to set how long the OSD will stay open if no buttons are pressed. Selecting a Background Image Select “Background” from the “Options” menu on the menu screen. For operating the menu screen, see page 31. OSD Timeout5 15 60 Main Menu Main Menu Selected itemDescription BlueBlue screen BlackBlack screen
Page 50
48 Easy to Use Functions OSD Blending This function allows you to set the transparency of the OSD menu. When set to transparent, you can see the image behind the menu. Reversing/Inverting Projected Images This projector is equipped with a reverse/invert image function that allows you to reverse or invert the projected image for various applications. Select “OSD Blending” from the “Options” menu on the menu screen. For operating the menu screen, see page 31. Setting the Projection Mode Select...