Studio Experience Projector Matinee 1hd User Manual

21
Basic Operation
Keystone Adjustment
1
Press the KEYSTONE /button on the remote control or
select the Keystone in the Setting menu.  (Refer to page 42.)
The Keystone dialog box appears.
2
Correct keystone distortion by pressing the KEYSTONE /
button or the POINT UP/DOWN button.  Press the KEYSTONE
button or the POINT UP button to reduce the upper part of
image, and press the KEYSTONE button or the POINT
DOWN button to reduce the lower part.  
Reduce the upper width with the KEYSTONE 
button or...

22
Basic Operation
On-Screen Menu
MENU
POINT
RIGHT
BUTTON
ITEM
Display the on-screen menu by pressing the MENU button on
the top control or the remote control. A main menu appears.
1
Main menu
Select an item by pressing the POINT UP/DOWN button, and
activate the item that you have selected by the 
, ,or 
button.  
Select a menu from the main menu by pressing the POINT
UP/DOWN button, and press the POINT RIGHT button to
enter the sub-menu.  (The selected icon turns yellow.)
3
2
Sub-menu
Press the SELECT...

23
Basic Operation
Contents of Menus
VIDEO MENUS
COMPUTER MENUS
INPUT SOURCE SELECTION:select input source either Video [Auto, Video, S-Video, (Y-Pb/Cb-Pr/Cr)] or
Computer.  (Refer to page 24, 25.)
VIDEO SYSTEM SELECTION:select Video system from AUTO, PAL, SECAM, NTSC, NTSC4.43, PAL-M,
PAL-N, 1080i, 1035i, 720p, 575p, 480p, 575i, 480i.  (Refer to page 26.)
IMAGE LEVEL SELECTION:select image level from Standard, Cinema, and Image 1 ~ 4.  (Refer to page
27.)
IMAGE LEVEL ADJUSTMENT:adjust Contrast /...

24
Video Input
Input Source Selection (Direct Operation)
You can select Video input or Computer input with the INPUT button.
(The input source that was selected last is selected when the projector
is turned on.)  
If the projector cannot reproduce proper video source, select correct
input source through menu operation on the next page.INPUT button
Video
Computer
WARNINGTEMP.
LAMPREPLACE
READY
LAMP
MENUINPUT
ON-OFF
SELECTNO SHOW
IMAGE
INPUT
1
2
IMAGEAUTO
VIDEO
VIDEO
TOP CONTROL REMOTE CONTROL
Press AUTO,...

25
Video Input
Input Source Selection (Menu Operation)
Press the MENU button, and the main menu appears.  Select
the Input Source Selection menu with the POINT UP/DOWN
button, and then press the POINT RIGHT button to enter the
sub-menu.  
Choose Video with the POINT UP/DOWN button and press
the POINT RIGHT button.  The source selection menu
appears.  
1
2
Source Selection menu (VIDEO)
Input Source Selection menu
Move the pointer to the source that you want to select with the
POINT UP/DOWN button, and...

26
Video input
Video System Selection menu (VIDEO / S-VIDEO)Press the MENU button, and the main menu appears.  Select
the Video System Selection menu with the POINT UP/DOWN
button, and then press the POINT RIGHT button to enter the
sub-menu.
Choose the system that you want to select with the POINT
UP/DOWN button, and then press the SELECT button to
activate the item. 
1
2
If the projector cannot reproduce proper video image, select a specific
system among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N....

27
Video Input
Image Level Selection (Menu Operation)
Press the MENU button, and the main menu appears.  Select
the Image Level Selection menu with the POINT UP/DOWN
button, and then press the POINT RIGHT button to enter the
sub-menu.
1
2
Choose the level that you want to set with the POINT UP/DOWN
button, and then press the SELECT button to activate it.
Image Level Selection menu
Normal picture adjustment preset on this projector.
Standard
Picture level adjusted for the picture with fine tone.
Cinema...

28
Video Input
Press the MENU button, and the main menu appears.  Select
the Image Level Adjustment menu with the POINT UP/DOWN
button, and then press the POINT RIGHT button to enter the
sub-menu.
1
2
Choose the item that you want to adjust with the POINT
UP/DOWN button, and then press the POINT LEFT/RIGHT
button to adjust each item.  The items displayed in a line can be
adjusted while you see the change of the image.  Press the
SELECT button to finish adjusting an item.  The on-screen menu
returns to...

29
Video Input
Press the POINT LEFT button to decrease contrast and the POINT RIGHT button to increase contrast.  (From 0 to 63.)
Press the POINT LEFT button to adjust image darker and the POINT RIGHT button to adjust image brighter.  (From 0 to 63.)
Contrast
Brightness
Press the POINT LEFT button or the POINT RIGHT button to obtain better balance of contrast.  (From 0 to 15.)
Gamma
Press the POINT LEFT button to lighten color and the POINT RIGHT button to deepen color.  (From 0 to 63.)
Press the POINT...

30
Video Input
This projector has a picture screen resize function, which enables you to display the desirable image size.
NOTE :  The Screen Size Adjustment cannot be operated when
“720p,” “1035i,” or “1080i” is selected in the Video
System Selection menu (p26).
Provides an image to fit screen size (16 : 9 aspect ratio) by expanding
the image width and height uniformly.  This function can be used for
providing a letter box mode picture (4 : 3 aspect picture with black bar
on the top and bottom edges) at...