Steinberg UR28M Getting Started Manual

UR28M  Getting Started11
Panel Controls and Terminals
English
Front Panel
HI-Z switch
 PAD switch
 +48V button
 INPUT GAIN knob 1/2
 PHONES knob 1/2
 2TR IN LEVEL knob
 2TR IN ON button
 INPUT meter
 OUTPUT meter

 OUTPUT buttons A–C
 SOURCE SELECT button
! MIX 1–3 lamp
 DIM button
 MONO MIX button
 OUTPUT LEVEL knob
? MUTE button
 Power button
 Word clock source lamp 

Setup
12UR28M  Getting Started
EnglishSetup
1. Setting up the 
Power Supply
Connecting the AC Power 
Adaptor
1.Insert the plug of the AC power 
adaptor into the DC IN 12V jack 
on the device.
To prevent accidental unplugging 
of the cable during operation, 
wrap the cable of AC power 
adaptor around the cable clip.
2.Insert the plug of the AC power 
adaptor into the pr oper AC outlet 
on the wall.
WARNING
Only use the included AC power 
adaptor (or an equivalent 
recommended by Yamaha). Using the 
wrong...

UR28M  Getting Started13
Setup
English
CAUTION
Before you connect external devices 
to the device, turn off the power to all 
devices after setting all volume 
levels to minimum. Otherwise, 
electrical shock, hearing loss, or 
damage to the components may 
occur.
NOTICE
Even when the device is turned off, 
electricity is still flowing to the device at 
the minimum level. When you are not 
using the device for a long time, make 
sure you unplug the AC power adaptor 
from the wall AC outlet.
2. Installing...

Setup
14UR28M  Getting Started
English3. Installing TOOLS 
for UR28M
NOTE
You are only permitted to use this 
software pursuant to the terms and 
conditions of the “License Agreement” 
shown during the installation.
Windows .................................page 14
Mac .........................................page 15
Windows
Preparation
If the following warning messages 
appear during the installation, click 
[Continue Anyway], [Y es], or [Install].
Example warning message on 
Windows XP Example warning...

UR28M  Getting Started15
Setup
English
7.When installation has been 
completed, click [Finish].
If a window requiring you to restart 
your computer appears, follow the 
on-screen instructions and restart 
the computer.
Device Connection
8.Connect the device directly to 
the computer by using the 
included USB cable.
Make sure to not connect it to a 
USB hub.
9.Turn on the device.
Windows XP:
The “Found New Hardware 
Wizard” window appears. Go on to 
step 10.
Windows Vista/Windows 7:
Go on to step 13....

Setup
16UR28M  Getting Started
English5.Open the CD-ROM then double-
click the file “TOOLS for 
UR28M.mpkg.”
6.Follow the on-screen 
instructions to install the 
software.
7.When installation has been 
completed, click [Restart] to 
restart the computer.
Device Connection
8.Connect the device directly to 
the computer by using a USB 
cable.
Make sure to not connect it to a 
USB hub.
9.Turn on the device.
Confirmation of Installation
10.Open the “Audio MIDI Setup” 
window as follows.
[Macintosh HD] 
...

UR28M  Getting Started17
Basic Operations
English
Basic Operations
Introduction
This section explains the connection 
examples and audio driver settings on 
DAW software. For more detailed 
usage, refer to the section “Usage 
Examples” in the Operation Manual.
CAUTION
Make sure to set all volume levels to 
minimum before connecting or 
disconnecting the external device. 
Otherwise, high-volume output may 
damage your hearing or equipment.
NOTICE
Be sure to observe the following points 
when connecting to...

Basic Operations
18UR28M  Getting Started
English4.Launch the Cubase series 
program as follows.
Windows:
[Start] 
 [All Programs]  
[Steinberg (Cubase series)] 
 
[(Cubase series)]
Mac:
[Macintosh HD] 
 [Applications]  
[(Cubase series)]
5.When the following window 
appears while the Cubase series 
program is launching, confirm 
that the device is selected, then 
click [OK].
The audio driver settings are now 
completed.
For instructions on using Cubase 
series programs, refer to the PDF 
manual,...

UR28M  Getting Started19
Troubleshooting
English
Troubleshooting
Tu r n i n g  O ff  t h e  Po w e r  
Automatically, or Flashing 
the Power Button
•The automatic power off function is 
enabled. 
Refer to the section “Control Panel of 
the Audio Driver” in the Operation 
Manual to disable this function.
No Sound
•Are the volume controls of the 
device set to appropriate levels?
Confirm the OUTPUT LEVEL knob 
and PHONES knob.
•Are the microphones and monitor 
speakers connected to the device 
properly?...

Troubleshooting
20UR28M  Getting Started
English•Does your computer satisfy the 
system requirements?
Confirm the system requirements. For 
the latest information, see the 
Steinberg web site below.
http://www.steinberg.net
•Are you recording or playing long 
continuous sections of audio?
The audio data processing 
capabilities of your computer will 
depend on a number of factors 
including CPU speed and access to 
external devices. Reduce the audio 
tracks then confirm the sound.
•Is a network adaptor...