Steinberg UR28M Getting Started Manual

USB AUDIO INTERFACE
EN
DE
FR
ES
JAIT 

2UR28M  Getting Started
1. IMPORTANT NOTICE: 
DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the 
instructions contained in this manual, meets FCC 
requirements. Modifications not expressly 
approved by Yamaha may void your authority, 
granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to 
accessories and/or another product use only high 
quality shielded cables. Cable/s supplied with this 
product MUST be used. Follow all installation 
instructions....

UR28M  Getting Started3
English
Contents
PRECAUTIONS ............................................ 4
Introduction ................................................. 7
A Message From the Development Team......... 7
Included Accessories ........................................ 7
How to Read the Manual ................................... 8
Panel Controls and Terminals ................. 10
Rear Panel ...................................................... 10
Front Panel...

4UR28M  Getting Started
EnglishPRECAUTIONS
PLEASE READ CAREFULLY
BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
 WARNING
Always follow the basic precautions listed below 
to avoid the possibility of  serious injury or even 
death from electrical shock, short-circuiting, 
damages, fire or other hazards. These 
precautions include, but are not limited to, the 
following:
• Do not place the power cord near heat sources such as 
heaters or radiators, and do not excessively...

UR28M  Getting Started5
English
• When removing the electric plug from the device or an 
outlet, always hold the plug itself and not the cord. Pulling 
by the cord can damage it.
• Remove the electric plug from the outlet when the device is  not to be used for extended periods of time, or during 
electrical storms.
• Do not place the device in an unstable position where it  might accidentally fall over.
• Do not place the device in a location where it may come  into contact with corrosive gases or salt...

6UR28M  Getting Started
EnglishNOTICE
To avoid the possibility  of malfunction/ damage 
to the product, damage to data, or damage to 
other property, follow the notices below.
• Do not use the device in the vicinity of a TV, radio, stereo 
equipment, mobile phone, or other electric devices. 
Otherwise, the device, TV, or radio may generate noise.
• Do not expose the device to excessive dust or vibrations,  or extreme cold or heat (such as in direct sunlight, near a 
heater, or in a car during the day) to...

UR28M  Getting Started7
Introduction
English
Introduction
A Message From the 
Development Team
Thank you for choosing the UR28M USB Audio 
Interface. The UR28M brings the sum total of our 
experience and know-how together with 
invaluable feedback from our customers 
throughout the world. Throughout the Yamaha n-
series and Steinberg MR series our focus has 
been on integrating consistently outstanding 
sonic design with features and software that are 
truly useful from a musici an’s perspective. The...

Introduction
8UR28M  Getting Started
English- Yamaha Steinberg USB Driver
This software allows 
communication between the device 
and a computer.
- Steinberg UR28M Applications This software allows setting the 
parameters of the device from a 
computer or using the Link function 
between the device and Cubase 
series. The software consists of the 
following four software 
components.
•dspMixFx UR28M
This software lets you set the 
device when using it with a DAW 
(Digital Audio Workstation) 
software...

UR28M  Getting Started9
Introduction
English
Operation Manual (PDF file)
This manual provides instructions on 
how to use the device and gives 
detailed information on specific 
functions. It is included in the TOOLS 
for UR28M CD-ROM.
NOTE
•For contents of the operation manual, 
refer to the section “Contents of the 
Operation Manual” (page 21).
•To view PDF files, you will need to install 
Adobe Reader on you computer. You 
can download the latest Adobe Reader 
at the following web site....

Panel Controls and Terminals
10UR28M  Getting Started
EnglishPanel Controls and Terminals
Rear Panel
DC IN 12V
 Grounding screw
 2TR IN (3.5mm, stereo)
 USB2.0 (USB port)
 S/PDIF IN/OUT (coaxial)
 PHONES 1/2 (phone type, stereo)
 LINE OUTPUT A–C (phone type, 
balanced/unbalanced)
 LINE INPUT 3/4 (phone type, 
balanced/unbalanced)
 MIC/LINE/HI-Z 1/2 (XLR/phone type, 
balanced/unbalanced)