Steinberg Nuendo SyncStation Operation Manual

6
Technical Data 

42
Technical Data
Specifications GPIO pin assignment
ÖWiring diagrams can be found on the Steinberg web 
site at http://service.steinberg.de/goto.nsf/show/
supportupdates_syncstation_en.
Connections5 V DC input
USB 1.1
Timecode In/Out (XLR)
MIDI In/Out
Video Sync In/Thru (BNC) SD/HD, 
bi-level/tri-level signals
Word Clock In (BNC)
Word Clock Out A-D (BNC) up to 192 kHz
AES In/Out (XLR) up to 96 kHz
AES In/Out (BNC) up to 96 kHz
SPDIF In/Out (Coax) up to 96 kHz
SPDIF In/Out (Optical) up to 96 kHz
RS422...

43
Technical Data
FCC information (U. S. A.)
Note: This equipment has been tested and found to comply 
with the limits for a Class A digital device, pursuant to part 
15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance 
with the instruction manual, may cause harmful...

44
Technical Data
Handling warranty issues
Go to www.steinberg.net/warranty to find the Steinberg 
Statement of Warranty, and information on the handling of 
warranty issues. This web page also contains the End 
User License Agreements for Steinberg software prod-
ucts. All documents are available as printable PDF files.
Updating the SyncStation driver
To operate the SyncStation via the USB port of your com-
puter, a driver software corresponding to the operating 
system of your computer must be...

Index 

46
Index
A
AES10, 14, 15, 19, 26
AES clock outputs
Setting in Nuendo30
Setting in SyncStation29
Audio pull
Setting in Nuendo28
Setting in SyncStation27
Auto-Edit20
B
Bi-level sync (video black burst)10
C
Clock distribution7
Clock outputs
Setting in Nuendo29
Setting in SyncStation28
Slave devices15
Status on SyncStation display19
Clock rate
On SyncStation display19
Setting in Nuendo27
Setting in SyncStation27
Clock reference
Inputs15
LED17
LTC10
MTC10
On SyncStation display19
Setting in Nuendo27
Setting...

47
Index
O
Operation (display mode)18
Opto/SPDIF outputs
Setting in Nuendo30
Setting in SyncStation30
Outputs on rear panel14
P
P2 In device ID
Setting in Nuendo32
Setting in SyncStation32
PAL9, 18, 25, 28
Phase (frame reference)11
Position from setting
In Nuendo32
In SyncStation32
Position request setting
In Nuendo32
In SyncStation31
Position source setting32
Precision Time Alignment25
Pull up/down9, 19
See also “Audio pull”
R
Rear panel inputs/outpus14
Recall factory settings26
Record track count...

Benutzerhandbuch 

Benutzerhandbuch von Ashley Shepherd
Überarbeitung, Qualitätssicherung und Übersetzung: Cristina Bachmann, Heiko Bischoff, Marion Bröer, Sabine Pfeifer, 
Heike Schilling
Die in diesem Dokument enthaltenen Informationen können ohne Vorankündigung geändert werden und stellen keine Ver-
pflichtung seitens der Steinberg Media Technologies GmbH dar. Ohne ausdrückliche schriftliche Erlaubnis durch die Stein-
berg Media Technologies GmbH darf kein Teil dieses Handbuchs für irgendwelche Zwecke oder in...

Inhaltsverzeichnis