Steinberg Nuendo 3 Remote Control Devices Manual

 
7
 
Mackie HUI 

 
NUENDO
7 – 22 Mackie HUI 
Specifications
 
Mackie HUI can control any number of channels in groups of 8. 
• 
Use the left and right Bank buttons to select channels 1-8, 9 -16 etc. 
• 
Use the left and right Channel buttons to shift the fader assignment in 
steps of one channel. 
• 
The Fader button in the Auto Enable section is used to disable/enable 
the motors. 
• 
The Mute, Pan, Send, Plug In and Send Mute buttons in the Auto En-
able section are currently not supported. 
• 
Use the Rec/Rdy buttons...

 
NUENDO
Mackie HUI 7 – 23 
• 
The SELECT ASSIGN four character display in the Select Assign sec-
tion displays Send or Pan assignment for V-Pots and V-Sel buttons. 
• 
The four character displays above the Select buttons display the as-
signed track names. 
• 
The Bypass button in the Select Assign section is always selected to 
indicate the bypass function of the Insert buttons. 
• 
The Mute, Rec/Rdy All, Input and Output buttons in the Select Assign 
section are currently not supported. 
• 
Use the...

NUENDO
7 – 24 Mackie HUI
•Press the Save button in the Keyboard Shortcuts section to save the 
current project.
Hold down the Shift button and press the Save button to save a backup copy of the 
current project.
•The Edit Mode, Edit Tool, Option/All, Ctrl/Clutch and Alt/Fine buttons 
in the Keyboard Shortcuts section are currently not supported.
•The Cut, Copy, Paste and Delete buttons in the Edit section control 
the equivalent Nuendo functions.
•The Capture and Separate buttons in the Edit section are...

NUENDO
Mackie HUI 7 – 25
•Pressing the cursor keys located to the left of the jog wheel is the 
same as pressing the arrow keys on your computer keyboard.
When the Mode button is selected, pressing the cursor keys will control zooming in 
the Project window.
•Use the Scroll control in the DSP Edit/Assign section to scroll through 
the pages of one parameter group.
•Use the Compare button in the DSP Edit/Assign section for page up.
Hold down the Shift button in the Keyboard Shortcuts section and press the...

NUENDO
7 – 26 Mackie HUI
•Use the Locate/Numerics buttons to set the project cursor position.
•Immediately after you enter a numeric character, the Mackie HUI time display 
will no longer show the project cursor position, but the new value.
•You don’t have to enter decimal points, colons, or semicolons for a new value.
•Use the CLR button to delete the last character. Holding down Shift (in the 
Keyboard Shortcuts section) and pressing the CLR button will delete the new 
value. 
•Press the Enter button...

8
Radikal Technologies SAC-2K 

NUENDO
8 – 28 Radikal Technologies SAC-2K
Specifications
The SAC-2K can control 32 channels (8 channels at a time).
•Press the "17-24" and "25-32" buttons to switch from one set of 
eight channels to the next.
•Use the "1-8" and "9-16" buttons to shift the fader assignment in 
steps of one channel.
•Use the Select button above the master fader to disable/enable the 
motors.
•Press the Mute/Solo button (the button on the far left) repeatedly to 
cycle through the...

NUENDO
Radikal Technologies SAC-2K 8 – 29
•The Play, Stop, Record, "" transport controls control the 
equivalent functions in Nuendo.
•The jog wheel is used to move the project cursor position in Nuendo.
•The Scrub button is currently not supported.
•The status of the Num button (in the Software Navigation section) de-
termines the assignment of the "1" to "0" and Enter buttons:
With Num-LED on, use the buttons to set the project cursor position:
•Immediately after you enter a...

NUENDO
8 – 30 Radikal Technologies SAC-2K
Pan button in the Mixer-Mode section: Fader Set mode Panning:
•Page 1 - Pan left/right
•Page 2 - Pan front/rear
•Pressing a V-Pot will toggle Monitor for that channel.
High button: Fader Set mode EQ High:
•Page 1 - Gain
•Page 2 - Frequency 
•Page 3 - Q
•Page 4 - Enable
•Pressing a V-Pot will bypass EQs for that channel.
HiMid, LowMid, Low button: Fader Set mode EQ Mid-High, Mid-Low, 
Low (same functionality as above).
Snd/Ins 1 button: Fader Set mode Send 1:...