Steinberg Nuendo 3 Remote Control Devices Manual
Have a look at the manual Steinberg Nuendo 3 Remote Control Devices Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 523 Steinberg manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 17
NUENDO
JL Cooper MCS-3000 5 – 17
•
The MCS-3000 bank keys 1 - 4 are used to select channels 1 - 32 in
groups of 8.
Bank key 1 selects channels 1 - 8, bank key 2 selects channels 9 - 16 and so on.
•
You can create markers by pressing the “Set Locate” key on the
MCS-3000, typing in a marker ID and pressing [Return].
•
To locate to a marker, press “Locate”, type in a marker ID and press
[Return].
•
The MCS-3000 Play, Stop, Record, Rewind and Fast Forward trans-
port controls will have the...](http://img.usermanuals.tech/thumb/86/103690/w64_Remote_Control_Devices_d-16.png "Page 17
NUENDO
JL Cooper MCS-3000 5 – 17
•
The MCS-3000 bank keys 1 - 4 are used to select channels 1 - 32 in
groups of 8.
Bank key 1 selects channels 1 - 8, bank key 2 selects channels 9 - 16 and so on.
•
You can create markers by pressing the “Set Locate” key on the
MCS-3000, typing in a marker ID and pressing [Return].
•
To locate to a marker, press “Locate”, type in a marker ID and press
[Return].
•
The MCS-3000 Play, Stop, Record, Rewind and Fast Forward trans-
port controls will have the...")
NUENDO 7 – 22 Mackie HUI Specifications Mackie HUI can control any number of channels in groups of 8. • Use the left and right Bank buttons to select channels 1-8, 9 -16 etc. • Use the left and right Channel buttons to shift the fader assignment in steps of one channel. • The Fader button in the Auto Enable section is used to disable/enable the motors. • The Mute, Pan, Send, Plug In and Send Mute buttons in the Auto En- able section are currently not supported. • Use the Rec/Rdy buttons to arm a track for recording. • Use the Select buttons to select a single track for detailed settings. • With the Mute and Solo buttons you can mute or solo a track. • Use the Default button to un-solo all tracks. • Use the Assign button to un-mute all tracks. • To the right of the time display, you find an LED labeled “Rude Solo Light”. This LED lights up as soon as any channel is soloed. • Use the Insert buttons to bypass all inserts of one track. Pan button in the Select Assign section: •Fader Set: panning left/right or panning front/rear. Press button repeatedly to cycle through the assignments (the eight V-Pots control the pan parameters). •V-Sel button in the Select Assign section: monitor track. Send A to Send E buttons in the Select Assign section: •Fader Set: Send 1 level to Send 8 level (Send A to Send D assigns Send 1 to Send 4, Send E assigns Send 5 to Send 8: press button repeatedly to cycle through the assignments). •V-Sel button in the Select Assign section: send on/off switch (depending on selected Send). •V-Sel button with Shift in the Select Assign section selected: pre/post fader switch (depending on selected Send).
NUENDO Mackie HUI 7 – 23 • The SELECT ASSIGN four character display in the Select Assign sec- tion displays Send or Pan assignment for V-Pots and V-Sel buttons. • The four character displays above the Select buttons display the as- signed track names. • The Bypass button in the Select Assign section is always selected to indicate the bypass function of the Insert buttons. • The Mute, Rec/Rdy All, Input and Output buttons in the Select Assign section are currently not supported. • Use the Auto buttons to control the status of the Read and Write but- tons in the Mixer of Nuendo, depending on the Read/Write status in the Auto Mode section. • Use the Off button in the Auto Mode section to control the Read All or Write All button in the mixer of Nuendo, depending on the Read/Write status in the Auto Mode section. •The Touch, Latch and Trim buttons in the Auto Mode section are cur- rently not supported. •Use the Transport button in the Window section to open or close the Transport panel. •Use the Edit button in the Window section to bring the current Project window to the front. •Use the Status button in the Window section to open or close the VST Performance window. •Use the Mix button in the Window section to open or close the Mixer window. •Use the Mem-Loc button in the Window section to open the Marker window. •The Alt button in the Window section is used for user-assigned functions. •The Undo button in the Keyboard Shortcuts section undoes the last performed operation in Nuendo. Hold down the Shift button and press Undo to redo the last undone operation.
NUENDO 7 – 24 Mackie HUI •Press the Save button in the Keyboard Shortcuts section to save the current project. Hold down the Shift button and press the Save button to save a backup copy of the current project. •The Edit Mode, Edit Tool, Option/All, Ctrl/Clutch and Alt/Fine buttons in the Keyboard Shortcuts section are currently not supported. •The Cut, Copy, Paste and Delete buttons in the Edit section control the equivalent Nuendo functions. •The Capture and Separate buttons in the Edit section are currently not supported. •The buttons in the Status/Group section are currently not supported. •Use the In and Out buttons above the transport controls to set the project cursor to the positions of the left or right locators. Hold down the Shift button and press the In or Out button to move the left or right lo- cator to the current project cursor position. •Use the RTZ and END buttons to set the project cursor to the begin- ning or the end of the project. •Press the Quick Punch button to switch automatic punch in on or off. Hold down the Shift button and press the Quick Punch button to switch automatic punch out on or off. •Press the Loop button to switch Cycle mode on or off. •Press the On Line button to switch Synchronisation on or off. •The Audition, Pre and Post buttons are used for user assignable func- tions (see function keys F1 to F7). •The Mackie HUI Play, Stop, Record, Rewind and Fast Forward trans- port controls control the equivalent functions in Nuendo. •The jog wheel is used for moving the project cursor position in Nuendo. •The Scrub and Shuttle buttons are currently not supported.
NUENDO Mackie HUI 7 – 25 •Pressing the cursor keys located to the left of the jog wheel is the same as pressing the arrow keys on your computer keyboard. When the Mode button is selected, pressing the cursor keys will control zooming in the Project window. •Use the Scroll control in the DSP Edit/Assign section to scroll through the pages of one parameter group. •Use the Compare button in the DSP Edit/Assign section for page up. Hold down the Shift button in the Keyboard Shortcuts section and press the Compare button to jump to the last page. •Use the Bypass button in the DSP Edit/Assign section for page down. Hold down the Shift button in the Keyboard Shortcuts section and press the Bypass button to jump to the first page. •Use the Insert/Param button in the DSP Edit/Assign section to switch the display of names of the available parameters in the lower row on or off. F1 button: Selected Channel: EQ •Page 1 - Gain, Frequency, Q and Enable for the lo band •Page 2 - Gain, Frequency, Q and Enable for the lo mid band •Page 3 - Gain, Frequency, Q and Enable for the hi mid band •Page 4 - Gain, Frequency, Q and Enable for the hi band •Buttons above dials: bypass EQs F2 button: Selected Channel: Sends •Pages 1 to 8 - Level, Enable, Pre/Post and Bus for Sends 1 to 8 •Buttons above dials: bypass sends F3 button: Selected Channel: Routing •Page 1 - Output Bus, Monitor, Input Bus, Input Gain •Page 2 - Input Phase •Buttons above dials: monitor •For a description of the functionalities for the F4 button: Selected Channel: Inserts, F5 button: Global mode Send Effects, F6 button: Global mode Master Effects, F7 button: Global mode Instruments, see the separate pdf document “Mackie Control and Nuendo”.
NUENDO 7 – 26 Mackie HUI •Use the Locate/Numerics buttons to set the project cursor position. •Immediately after you enter a numeric character, the Mackie HUI time display will no longer show the project cursor position, but the new value. •You don’t have to enter decimal points, colons, or semicolons for a new value. •Use the CLR button to delete the last character. Holding down Shift (in the Keyboard Shortcuts section) and pressing the CLR button will delete the new value. •Press the Enter button to set the project cursor to the position according to the new value. •Use the "+" and "-" buttons to shift the project cursor position forward or backward by the amount of time set with the new value. •The three LEDs left of the time display indicate whether Bars+Beats (BEATS), a frame based timecode (TIME CODE), Feet+Frames (FEET) or Samples (all LEDs off) is selected.
NUENDO 8 – 28 Radikal Technologies SAC-2K Specifications The SAC-2K can control 32 channels (8 channels at a time). •Press the "17-24" and "25-32" buttons to switch from one set of eight channels to the next. •Use the "1-8" and "9-16" buttons to shift the fader assignment in steps of one channel. •Use the Select button above the master fader to disable/enable the motors. •Press the Mute/Solo button (the button on the far left) repeatedly to cycle through the assignments for the Mute/Solo and Select buttons of every channel. The current assignments are indicated by the LED in the button: •Use the From and To buttons to set the project cursor to the position of the left or right locator. Hold down Shift and press the From or To button to move the left or right locator to the current project cursor position. If you hold down Shift and press the "" but- tons, the project cursor is set to the beginning or the end of the project •Press the Store Marker button to create a marker at the project cursor position. Hold down Shift and press the Store Marker button to open the Marker window. •Use the Recall Marker button to move the project cursor to the clos- est marker to the right. Hold down Shift and press the Recall Marker button to move the project cursor to the closest marker to the left. LED status Mute/Solo buttons Select buttons Off Mute track. Select a single track for detailed settings. On Solo track. Select a single track. Blinking Control the status of the Write buttons in the Nuendo mixer.Control the status of the Read buttons in the Nuendo mixer.
NUENDO Radikal Technologies SAC-2K 8 – 29 •The Play, Stop, Record, "" transport controls control the equivalent functions in Nuendo. •The jog wheel is used to move the project cursor position in Nuendo. •The Scrub button is currently not supported. •The status of the Num button (in the Software Navigation section) de- termines the assignment of the "1" to "0" and Enter buttons: With Num-LED on, use the buttons to set the project cursor position: •Immediately after you enter a numeric character, the SAC-2k time display will no longer show the project cursor position but the new value. •You don’t have to enter decimal points, colons, or semicolons for a new value. •Num button: delete the new value and deactivate locate functionality. •Enter button: set the project cursor to the position according to the new value. •Store Marker button: set the project cursor to the position according to the new value, and create a marker at the new project cursor position. With the Num-LED off: •Use the "1" button for page up (step through pages of one parameter group). •Hold down Shift and press the "1" button to jump to the last page. •Use the "6" button for page down. •Hold down Shift and press the "6" button to jump to the first page. •Press the Enter button to switch the display of names of the available para- meters in the lower row on or off. •The function keys "2" to "5", "7" to "0" and function key combinations with the Shift button can be used to access functions in Nuendo. Refer to the Nuendo operation manual for information about how to assign program functions to remote controller function keys. Some of the keys are already pre-assigned (and/but can be modified): "5" button: undo the last operation in Nuendo. Hold down Shift and press the "5" button to “undo the undo”. "7" button: copy; hold down Shift and press the "7" button to cut. "9" button: paste. "0" button: save the current project; hold down Shift and press the "0" button to save a backup copy of the current project. Hold down Shift and press the "2", "3", "4" or "8" buttons to control zooming in the Project window.
NUENDO 8 – 30 Radikal Technologies SAC-2K Pan button in the Mixer-Mode section: Fader Set mode Panning: •Page 1 - Pan left/right •Page 2 - Pan front/rear •Pressing a V-Pot will toggle Monitor for that channel. High button: Fader Set mode EQ High: •Page 1 - Gain •Page 2 - Frequency •Page 3 - Q •Page 4 - Enable •Pressing a V-Pot will bypass EQs for that channel. HiMid, LowMid, Low button: Fader Set mode EQ Mid-High, Mid-Low, Low (same functionality as above). Snd/Ins 1 button: Fader Set mode Send 1: •Page 1 - Level •Page 2 - Enable •Page 3 - Pre/Post •Page 4 - Bus •Pressing a V-Pot will bypass sends for that channel. Snd/Ins 2 to 4 buttons: Fader Set mode Send 2 to Send 4 (same func- tionality as above). Depending on the Snd/Ins button status (above Snd/Ins 1 button) Snd/Ins 1 to Snd/Ins 4 buttons are assigned to Send 1 to Send 4 or Send 5 to Send 8. EQs button (Channel-Strips section): Selected Channel mode EQ: •Page 1 - Gain, Frequency, Q and Enable for the lo band, Gain, Frequency, Q and Enable for the lo mid band •Page 2 - Gain, Frequency, Q and Enable for the hi mid band, Gain, Fre- quency, Q and Enable for the hi band •Pressing a V-Pot will bypass EQs. Inserts/Sends button: Selected Channel mode Sends: •Page 1 - Level for Send 1 to Send 8 •Page 2 - Enable for Send 1 to Send 8 •Page 3 - Pre/Post for Send 1 to Send 8 •Page 4 - Bus for Send 1 to Send 8 •Pressing a V-Pot will bypass sends.