Steinberg Nuendo 3 Remote Control Devices Manual
Have a look at the manual Steinberg Nuendo 3 Remote Control Devices Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 523 Steinberg manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NUENDO Radikal Technologies SAC-2K 8 – 31 Dynamics button: Selected Channel mode Routing: •Page 1 - Output Bus, Monitor, Input Bus, Input Gain, Input Phase •Pressing a V-Pot will toggle Monitor. For a description of the functionalities for the MIDI button: Selected Channel mode Inserts, Shift+Inserts/Sends button: Global mode Send Effects, Shift+Dynamics button: Global mode Master Effects, Shift+MIDI button: Global mode Instruments, see the separate pdf document “Mackie Control and Nuendo”.
NUENDO 9 – 34 Roland MCR-8 Specifications Before you can initiate remote control operation, the MCR-8 “Mode” switch must be set to “4”. The Roland MCR-8 can control 16 mixer channels, plus transport con- trol. The “A/B switch” is used to switch between controlling channels 1 - 8 and 9 - 16. The following MCR-8 parameters control the equiva- lent parameters for each channel strip: •Fader level, mute, solo and pan. The following MCR-8 transport controls control the equivalent Nuendo functions: •Play, Stop, Record, Rewind, Fast Forward. The MCR-8 does not support “MIDI feedback”, that is, the current status of parameters in Nuendo is not indicated on the MCR-8. Therefore, you only need a one-way MIDI connection between the MCR-8 and Nuendo.
NUENDO 10 – 36 Tascam US-428 Specifications The US-428 can remote control up to 64 mixer channels and 1 or 2 DSP Factory cards, if installed (Windows version only). •When the Tascam US-428 device is added in the Device Setup dia- log, you can open the Remote Status window by selecting “Tascam US-428” from the Devices menu. This indicates which bank (group of eight channels in Nuendo) is currently being con- trolled by the remote device. To select another bank, use the pop-up menu in the win- dow or use the Bank Left/Right buttons on the remote device. •The US-428 transport keys will have the equivalent functionality in Nuendo. •To set markers, hold down “Set” while pressing a locator key. •If you hold down the function key [Null] and then move a fader, the Select and Rec indicators above the fader will indicate whether the fader position is below or above the current fader level in Nuendo. If the upper indicator is lit, the fader position on the panel is above the fader level in Nuendo and vice versa. When both indicators are dark, fader positions are matched for that channel. The US-428 supports “MIDI Feedback”, allowing for mute/solo, channel selection, EQ band, Aux 1 to 4 and transport status to be indicated on the panel. For this (and the fader position indication described above) to work, you need to select the “US-428 Control” port as input and output.
NUENDO Tascam US-428 10 – 37 Nuendo mixer The following US-428 controls will remote control the following mixer parameter for each channel strip: •Fader: volume •Mute/Solo: mute and solo (selected via the Solo switch) •Select: selects channel for editing •Pan-Dial: pan •EQ-Gain Controls the EQ gain for each band selected with the Low, LoMid, HiMid and High but- tons. These correspond to the four EQ bands in Nuendo, starting from the leftmost band. •EQ-Freq Controls the EQ frequency for each band selected with the Low, LoMid, HiMid and High buttons. These correspond to the four EQ bands in Nuendo, starting from the leftmost band. •EQ-“Q” Controls the EQ “Q” for each band selected with the Low, LoMid, HiMid and High but- tons. These correspond to the four EQ bands in Nuendo, starting from the leftmost band. •Aux 1 to Aux 4 and shuttle wheel: The effect send levels for sends 1 to 4. •The shuttle wheel will act as position shuttle if no Aux send button is selected. Press the activated button to deselect it. •Holding down the “Asgn” button and pressing the Low, LoMid, HiMid and High EQ buttons switches the corresponding EQ band “On” but- ton status. •Holding down the “Asgn” button and pressing the Aux1 to Aux4 but- tons switches the corresponding Effect Send 1-4 “On” button status.
NUENDO 10 – 38 Tascam US-428 DSP Factory (Nuendo for Windows only) The following US-428 controls will remote control the following DSP Factory parameter for each channel strip: •Fader: volume •Mute/Solo: mute and solo (selected via the Solo switch) •Select: selects channel for editing •Pan-Dial: pan •EQ-Gain Controls the corresponding EQ gain for each band selected with the Low, LoMid, HiMid and High buttons. •EQ-Freq Controls the corresponding EQ frequency for each band selected with the Low, LoMid, HiMid and High buttons. •EQ-“Q” Controls the corresponding EQ “Q” for each band selected with the Low, LoMid, HiMid and High buttons. •Aux 1 to Aux 4 and shuttle wheel: Control the effect send levels for sends 1/2 and 5/6. •Holding down the “Asgn” button and pressing the Low, LoMid, HiMid and High EQ buttons switches the corresponding EQ band “Bypass” button status. •Holding down the “Asgn” button and pressing the Aux1 to Aux4 but- tons switches the effect sends 1/2 and 5/6 “On” button status.
NUENDO 11 – 40 Yamaha 01V Specifications The Yamaha 01V can remote control either the Nuendo mixer or the Yamaha DSP Factory if installed (Windows only; see the separate “Using Nuendo with DSP Factory” document for details). Before you can initiate remote control operation, the 01V must be set up in the following way: •MIDI Parameter Change and Receive must be enabled. •MIDI Control Change and Receive must be disabled. •Device ID / MIDI Channel Receive must be set to “1”. •Local Control should be set to “Off”. As soon as Local Control is set to “Off”, remote control of the mixer is enabled. The 01V remote operation of the Nuendo mixer is very straightforward, with (almost) every parameter having the equivalent parameter control- ler in the 01V mixer. The current status of all controllable parameters is fed back to the 01V and indicated on the panel, using the motorized faders, indicators, etc. (for this to work, you need a two-way MIDI con- nection between the 01V and Nuendo). To facilitate 32 channel remote control, two separate control “Layouts” are used, each controlling 16 mixer channels. The “Memory” button on the 01V is used to switch between VST layout 1 and 2 (when using Nu- endo for Windows there are also two layouts for the DSP Factory – see the “Using Nuendo with DSP Factory” document). Page 1 displays VST Layout 1, page 2 VST Layout 2, page 3 DSP Factory Layout 1 and page 4 DSP Factory Layout 2.