Home > Steinberg > Music Workstation > Steinberg Halion Sonic 2 Manual

Steinberg Halion Sonic 2 Manual

Here you can view all the pages of manual Steinberg Halion Sonic 2 Manual. The Steinberg manuals for Music Workstation are available online for free. You can easily download all the documents as PDF.

Page 91

91
AuronThe Voice Page
Duration
Controls the modulation depth of the grain duration modulation.
Cutoff
Controls the modulation depth of the filter cutoff modulation.
Mod Wheel Settings
Vib Freq
Controls the frequency of the second LFO that is used for pitch modulation (vibrato).
Vib Depth
Controls the depth of the vibrato modulation.
Position
Controls the influence of the mod wheel on the grain position.
Formant
Controls the influence of the mod wheel on the grain formant.
Duration
Controls the influence...

Page 92

92
AuronThe Voice Page
Fixed Pitch
Activate this option if you do not want the sample to be transposed over the keyboard. 
When you work with short grain durations and “Duration Key Follow” is activated, the 
pitch of the played key still follows the keyboard, and only the frequency response 
changes.
Pitchbend Up/Down
Here, you can set the range for the modulation that is applied when you move the 
pitchbend wheel.
Glide
You can use this parameter to bend the pitch between two notes that follow each...

Page 93

93
AuronThe Filter Section
The Filter Section
Filter Parameters
Filter Shape
The filter shapes are the same as on the Filter subpage, see “Filter Shape” on page 39.
Cutoff
Controls the cutoff frequency of the filter.
Resonance
This parameter emphasizes the frequencies around the cutoff. At higher resonance 
settings, the filter self-oscillates, which results in a ringing tone.
Distortion
This parameter adds distortion to the signal.
The following distortion types are available:
Env Amount
Controls the...

Page 94

94
AuronThe Amp Section
The Amp Section
Amp Parameters
Level
Controls the overall volume of the sound.
Velocity
Controls the level modulation from velocity. At 0, all notes are played with the same 
level.
Amp Envelope
Attack
Controls the attack time of the amplifier envelope.
Decay
Controls the decay time of the amplifier envelope.
Sustain
Sets the sustain level of the amplifier envelope.
Release
Sets the release time of the amplifier envelope.
The Arp Page
This page contains the same parameters as the...

Page 95

95
Trium
Introduction
Trium was designed to create modern and rich sounds. It comes with three oscillators, 
a sub oscillator, a ring modulator, and a noise generator. With the integrated 
arpeggiator and step sequencer, you can create anything from sequencer lines to 
stepped chords.
The oscillators are followed by a multi-mode filter that offers a large number of 
different filter shapes. The filter can be modulated using modulation sources like the 
keyboard, velocity, and LFO, but also by the...

Page 96

96
TriumThe Osc Page
The Osc Page
The Oscillator page contains the same parameters as the Oscillator subpage, see 
“The Oscillator Subpage” on page 34. 
The following additional parameter is available:
Filter Envelope
Here, you can specify how much the modulation of the filter envelope influences the 
oscillator waveform. This parameter is only available for oscillator types that allow 
waveform modulation. 
The Sub Page
The parameters for the sub oscillator, the ring modulator, and the noise generator...

Page 97

97
TriumThe Sub Page
Mono
Activates monophonic playback. 
Retrigger
When this option is activated, a note that was stolen is retriggered if you still hold the 
stolen note when releasing the new one. This lets you play trills by holding one note 
and quickly and repeatedly pressing and releasing another note, for example.
Trigger Mode
Defines the trigger behavior for new notes. The following settings are available:
Filter Section
Filter Shape
The filter shapes are the same as on the Filter subpage, see...

Page 98

98
TriumThe Amp Section
Filter Envelope
Attack
Controls the attack time of the filter envelope.
Decay
Controls the decay time of the filter envelope.
Sustain
Controls the sustain level of the filter envelope. 
Release
Controls the release time of the filter envelope.
The Amp Section
Amp Parameters
Level
Controls the overall volume of the sound.
Velocity
Controls the level modulation from velocity. At 0, all notes are played with the same 
loudness.
Amp Envelope
Attack
Controls the attack time of the...

Page 99

99
TriumThe Arp Page
Pitch
Controls the modulation depth of the pitch modulation.
Cutoff
Controls the modulation depth of the filter cutoff modulation.
Osc1/2/3 Wave
These parameters control the modulation depth of the waveform modulation of the 
three main oscillators. These controls are only available if the selected oscillator type 
supports waveform modulation.
Mod Wheel Parameters
Vib Freq
Controls the frequency of the second LFO that is used for pitch modulation (vibrato).
Vib Depth
Controls the...

Page 100

100
Voltage
Introduction
Voltage is a two-oscillator and noise synthesizer that can be used for synth basses, 
but it also allows you to create any kind of classic monophonic and polyphonic synth 
sound. With the integrated arpeggiator and step sequencer, you can create anything 
from sequencer lines to stepped chords.
The two oscillators and the noise generator are followed by a 24 dB low-pass filter. 
The filter can be modulated using modulation sources like the keyboard, velocity, and 
LFO, but also...
Start reading Steinberg Halion Sonic 2 Manual

Related Manuals for Steinberg Halion Sonic 2 Manual

All Steinberg manuals