Steinberg Cubase SX/SL 3 Remote Control Devices Manual

 
6
 
Mackie Control 

 
CUBASE SX/SL
 
6 – 22 Mackie Control 
About Mackie Control
 
Mackie Control is an automated touch-sensitive control surface. It is a 
nine-fader (eight channels and master) MIDI controller that provides 
in-depth mixing, editing, automation and navigational control for any 
supported digital audio workstation.
A special Lexan overlay that shows all Steinberg-specific key assign-
ments for the Mackie Control device is available to customize the con-
troller for Cubase SX/SL. 
• 
For details about...

 
7
 
Mackie HUI 

 
CUBASE SX/SL
 
7 – 24 Mackie HUI 
Specifications
 
Mackie HUI can control any number of channels in groups of 8. 
• 
Use the left and right Bank buttons to select channels 1-8, 9 -16 etc. 
• 
Use the left and right Channel buttons to shift the fader assignment in 
steps of one channel. 
• 
The Fader button in the Auto Enable section is used to disable/enable 
the motors. 
• 
The Mute, Pan, Send, Plug In and Send Mute buttons in the Auto En-
able section are currently not supported. 
• 
Use the Rec/Rdy...

 
CUBASE SX/SL
 
Mackie HUI 7 – 25 
• 
The SELECT ASSIGN four character display in the Select Assign 
section displays Send or Pan assignment for V-Pots and V-Sel but-
tons. 
• 
The four character displays above the Select buttons display the as-
signed track names. 
• 
The Bypass button in the Select Assign section is always selected to 
indicate the bypass function of the Insert buttons.
•The Mute, Rec/Rdy All, Input and Output buttons in the Select Assign 
section are currently not supported.
•Use the...

CUBASE SX/SL7 – 26 Mackie HUI
•The Undo button in the Keyboard Shortcuts section undoes the last 
performed operation in Cubase SX/SL.
Hold down the Shift button and press Undo to redo the last undone operation.
•Press the Save button in the Keyboard Shortcuts section to save the 
current project.
Hold down the Shift button and press the Save button to save a backup copy of the 
current project.
•The Edit Mode, Edit Tool, Option/All, Ctrl/Clutch and Alt/Fine buttons 
in the Keyboard Shortcuts section are...

CUBASE SX/SLMackie HUI 7 – 27
•The Scrub and Shuttle buttons are currently not supported.
•Pressing the cursor keys located to the left of the jog wheel is the 
same as pressing the arrow keys on your computer keyboard.
When the Mode button is selected, pressing the cursor keys will control zooming in 
the Project window.
•Use the Scroll control in the DSP Edit/Assign section to scroll through 
the pages of one parameter group.
•Use the Compare button in the DSP Edit/Assign section for page up.
Hold down...

CUBASE SX/SL7 – 28 Mackie HUI
•Use the Locate/Numerics buttons to set the project cursor position.
• Immediately after you enter a numeric character, the Mackie HUI time display 
will no longer show the project cursor position, but the new value.
• You don’t have to enter decimal points, colons, or semicolons for a new value.
• Use the CLR button to delete the last character. Holding down Shift (in the 
Keyboard Shortcuts section) and pressing the CLR button will delete the new 
value. 
• Press the Enter...

8
Radikal Technologies SAC-2K 

CUBASE SX/SL8 – 30 Radikal Technologies SAC-2K
Specifications
The SAC-2K can control 32 channels (8 channels at a time).
•Press the "17-24" and "25-32" buttons to switch from one set of 
eight channels to the next.
•Use the "1-8" and "9-16" buttons to shift the fader assignment in 
steps of one channel.
•Use the Select button above the master fader to disable/enable the 
motors.
•Press the Mute/Solo button (the button on the far left) repeatedly to 
cycle through the...