Starplus Triad Xts Installation Manual
Here you can view all the pages of manual Starplus Triad Xts Installation Manual. The Triad manuals for Telephone are available online for free. You can easily download all the documents as PDF.
Page 51
Main Processing Board Installation 3-17 Chapter 3 - System Installation Figure 3-10: MPB, PMU, and MODU Configuration Program Module Unit The Program Module Unit (PMU) is installed on the MPB and contains the software used by the system to control features and their function. Install the PMU before installing the MPB. PMU MODU Por t 2 Paging (MPB2 only) Music on Hold Por t 5 Por t 1 LEDs Database Reset Button Ethernet Jack Default Switch Future Use) (MPB2 only) (MPB2 only) (MPB2 only -
Page 52
3-18 Main Processing Board Installation Chapter 3 - System Installation Installing the PMU 1. Unpack the PMU from its antistatic conductive bag. 2. LocatetheCN8andCN9connectorsontheMPB.LocatetheCN1andCN9connectorson the PMU. 3. Position the PMU so that CN1 and CN2 align withCN8 and CN9 respectively on the MPB. Push the PMU onto the respective connectors and make sure it seats properly. Modem Unit The Modem Unit (MODU) provides an asynchronous modem for access to the system database and fault reporting...
Page 53
Miscellaneous Interface Unit Installation 3-19 Chapter 3 - System Installation Figure 3-12: LMU2 Board Configuration Miscellaneous Interface Unit Installation The Miscellaneous Interface unit (MISB) contains an External Music port (MOH/BGM), an External paging port, and four dry contacts. Optionally, the MISB is equipped with two serial interface ports by installing the Serial Interface Unit (SIU) daughter board. The SIU should be installed if more than two serial communication devices are to be...
Page 54
3-20 Miscellaneous Interface Unit Installation Chapter 3 - System Installation Table 3-4: MISB Wiring Pair PIN # Color Description Pair PIN # Color Description 126 1WH/BL BL/WHRELAY1R RELAY1T14 39 14BK/BN BN/BK 227 2WH/OR OR/WHRELAY2R RELAY2T15 40 15BK/SL SL/BK 328 3WH/GN GN/WHRELAY3R RELAY3T16 41 16YL/BL BL/YL 429 4WH/BN BN/WHRELAY4R RELAY4T17 42 17YL/OR OR/YL 530 5WH/SL SL/WH18 43 18YL/GN GN/YLALARM - R ALARM - T 631 6RD/BL BL/RD19 44 19YL/BN BN/YL 732 7RD/OR OR/RD20 45 20YL/SL SL/YL 833 8RD/GN GN/RD21...
Page 55
Miscellaneous Interface Unit Installation 3-21 Chapter 3 - System Installation Serial Interface Unit The Serial Interface Unit (SIU) board is used for SMDR printout and caller ID. The system supports up to 4 Serial Interface circuits, 2 circuits on the MPB and an additional 2 circuits on the SIU board (ports 3 and 4). The following is a list of the system’soutput: On-line SMDR ACD Caller ID Installing the SIU 1. Unpack the SIU from its antistatic conductive bag. There should also be a plastic bag with...
Page 56
3-22CO/PBX Connections Chapter 3 - System Installation CO/PBX Connections There are four types of analog CO/PBX Line interface boards available. These boards include the Loop Start CO Line Interface Boards (LCOB, LCOBE, and LCOBC) and the Direct Inward Dial Interface Board (DIDB). There are four types of digital CO/PBX Line interface boards available. These boards include the T1IB, PRIB, BRIB, and VOIP card. When using CO Lines as additional music inputs, keep in mind that the music source may require a...
Page 57
CO/PBX Connections3-23 Chapter 3 - System Installation DTRU4 to LCOBE or LCOBC 1. Unpack the DTRU4 module from its antistatic conductive bag. 2. Locate the CN1 and CN2 connectors on the DTRU4 module. 3. Locate the CN1 and CN2 connectors on the LCOBE. 4. Position the DTRU4 module so that the CN2 and CN1 connectors align with the CN1 and CN2 connectors on the LCOB respectively. 5. Push the DTRU4 onto these connectors to seat it securely. Figure 3-15: LCOB Interface Board w/DTRU Installation DTRUCON2...
Page 58
3-24CO/PBX Connections Chapter 3 - System Installation Figure 3-16: LCOBE & LCOBC w/DTRU4 Installation CN2CN1 CN2 CN3 D TR U4
Page 59
CO/PBX Connections3-25 Chapter 3 - System Installation Table 3-5: LCOB Wiring LCOB Connector LCOB Designation Connector Pin # J2 3 Tip 1 2Ring1 4Tip2 1Ring2 J3 3 Tip 3 2Ring3 4Tip4 1Ring4 J4 3 Tip 5 2Ring5 4Tip6 1Ring6
Page 60
3-26CO/PBX Connections Chapter 3 - System Installation Pair PIN # Color Description Pair PIN # Color Description 126 1WH/BL BL/WHRing 1 Tip 1 LCOBE and LCOBC Station Ports 13 38 13BK/GN GN/BK 227 2WH/OR OR/WHRing 2 Tip 214 39 14BK/BN BN/BK 328 3WH/GN GN/WHRing 3 Tip 315 40 15BK/SL SL/BK 429 4WH/BN BN/WHRing 4 Tip 416 41 16YL/BL BL/YL 530 5WH/SL SL/WHRing 5 Tip 517 42 17YL/OR OR/YL 631 6RD/BL BL/RDRing 6 Tip 618 43 18YL/GN GN/YL 732 7RD/OR OR/RDRing 7 Tip 719 44 19YL/BN BN/YL 833 8RD/GN GN/RDRing 8 Tip...