Sony Vpl Ew7 Projector User Manual

31The PICTURE SETTING Menu
Adjustments and Settings Using a Menu
Color Temp. Adjusts the color temperature.
High: Makes white colors bluish.
Middle: Makes white part of the picture natural 
white. 
Low: Makes white colors reddish.Set according to 
the input signal
DDE (Dynamic 
Detail 
Enhancer)Selects the mode to play the input video signal 
according to the material.
Off: Plays back the interlace format without 
conversion.
Progressive: Plays back the video picture of the 
interlace format converting...

32The INPUT SETTING Menu
The INPUT SETTING Menu
The INPUT SETTING menu is used to adjust the input signal.
When the signal is input from a computer
Setting items Functions Initial setting
Adjust Signal...
Dot Phase Adjusts the dot phase of the LCD panel and the signal 
output from a computer. 
Adjust the picture further for finer picture after the 
picture is adjusted by pressing the APA key.Set according to 
the input signal
H Size Adjusts the horizontal size of a picture output from a 
computer.
Adjust...

33The INPUT SETTING Menu
Adjustments and Settings Using a Menu
*1: VPL-EW7 only
*2: VPL-EX70/EX7 only
 For Aspect, some of the “Aspect” setting items are not displayed on the screen according to the 
input signal.
 Note that if the projector is used for profit or for public viewing, modifying the original picture by 
switching to the wide mode may constitute an infringement of the rights of authors or producers, 
which are legally protected.
This projector has 45 types of preset data for 
input signals...

34The SET SETTING Menu
The SET SETTING Menu
The SET SETTING menu is used for changing the settings of the projector.
Setting items Functions Initial setting
Smart APA The APA (Auto Pixel Alignment) automatically 
adjusts “Dot Phase,” “H Size” and “Shift” on the 
INPUT SETTING menu for the input signal from a 
computer.  
On: When a signal is input from a computer, the 
APA functions automatically so that the picture can 
be seen clearly.  You can adjust the picture by 
pressing the APA key on the Remote...

35The SET SETTING Menu
Adjustments and Settings Using a Menu
 Press the APA key when the full image is displayed on the screen. If the projected image includes 
a black portion around it, the APA function will not work properly and some parts of the image 
may not be displayed on the screen.
- You can cancel the adjustment by pressing the APA key again while “Adjusting” appears on the 
screen.
- The picture may not be adjusted properly depending on the type of input signal.
- Adjust the “Dot Phase,” “H...

36The MENU SETTING Menu
The MENU SETTING Menu
The MENU SETTING menu is used for changing the menu displays.
Setting items Functions Initial setting
Status (on-screen 
display)Sets up the on-screen display.
When set to “Off,” turns off the on-screen displays 
except for the menus, a message when the power is 
turned off, and warning messages.On
Language Selects the language used in the menu and on-screen 
displays. Use the v/V/b/B keys to select the display 
language, and press the ENTER key.English
Menu...

37The INSTALL SETTING Menu
Adjustments and Settings Using a Menu
The INSTALL SETTING Menu
The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTINGInput-A
V Keystone:  Auto
Image Flip:  Off
Background: Blue
Lamp Mode:  Standard
High Altitude Mode: Off
Security Lock:  Off
Direct Power On:  Off
Standby Mode:  Low
Setting items Functions Initial setting
V Keystone
(VPL-EX70/
EW7 only)Corrects the trapezoidal distortion caused by the projection 
angle. Select “Auto” for...

38The INSTALL SETTING Menu
 The picture quality may deteriorate when the V Keystone function is used, because it is an 
electrical correction.
 If you set “High Altitude Mode” to “On” at an altitude of under 1,500 m, the reliability of the lamp 
may be reduced.
 The auto V Keystone adjustment may not correct the trapezoidal distortion perfectly, depending 
on the room temperature or the screen angle.
 If you need fine adjustment when V Keystone is set to “Auto”, press the KEYSTONE key on the 
control...

39The INFORMATION Menu
Adjustments and Settings Using a Menu
The INFORMATION Menu
The INFORMATION menu displays the model name, serial number, the horizontal and vertical 
frequencies of the input signal and the cumulated hours of usage of the lamp.
These are only displayed on the screen. You cannot alter the display, and these is no setting to be 
altered.
fH: 48,47kHzfV: 60,00Hz
 No.23
 1024x768
Lamp Timer:  2     H VPL-EX70 Serial No. 3333333
INFORMATIONInput A
Memory number of an input signal
Signal...

40The INFORMATION Menu
Input signals and adjustable/setting items
Some of the items in the menus cannot be adjusted depending on the input signal as indicated 
in the following tables. 
The items that cannot be adjusted are not displayed in the menu.
PICTURE SETTING menu
z : Adjustable/can be set
– : Not adjustable/cannot be set
*1: Except for preset memory No. 7, 8*2: Cannot be set in the Presentation mode
INPUT SETTING menu
z : Adjustable/can be set
– : Not adjustable/cannot be set
*3: Can be set...