Sony Vaio Sony Vaio Vgna Manual

A Series
Confidential
LCD Section-1
1)
2)1.MS-1-D.11
4)
Wireless LAN card
Cable (Wireless LAN)
Peel off the Kapton Tape (two places), and remove the Cable.
Cable (Wireless LAN)
Disconnect the Cable (Wireless LAN) from the Wireless LAN Card.
*Disconnect the Connector vertically with the tweezers or the like. 
3)
LCD Section
Bottom section
Cover (Hinge)
Remove the Cover (two places)*Open the LCD as wide as possible, and hold the bottom section. 
Flip the large detent on the front side upward, and the Cover...

A Series
Confidential
LCD Section-2
1.MS-1-D.123)4)
Raise the LCD Section on your both hands to remove it.
1)
Disconnect the Harness coming from the LCD.
LCD Section
Remove the two screws on the rear.
Screw:B9
Screw:B7
Remove the three Screws each on the right and left. 
2)
*Hold the LCD Section not to tumble it while at work. 

A Series
Confidential
Display Base
1)
2)1.MS-1-D.13
Remove the Display Base.
Screw:B1
Remark
ƒlƒW(7)Remove the seven screws.
*It is recommended to disengaging the detents first in the direction of the arrows (left). 
Display Base 

A Series
Confidential
Fin(Thermal Module)
1)
2)1.MS-1-D.14
Remove the three screws.
Pull out the Fin (Thermal Module) toward you.
Screw:B1
*Pull out the Fin from metallic box of the Thermal Module to remove it.
Remark
Fin(Thermal Module)
Thermal Module 

A Series
Confidential
CPU
1)
2)1.MS-1-D.15
Raise the CPU upward vertically to remove. 
*Be careful not to bend the pins. 
CPU
Unlock the CPU by using a 4 mm flat head screwdriver as shown in the picture. 

A Series
Confidential
Thermal Module
1)
2)1.MS-1-D.163)
Remove the four screws.Disconnect the Harness vertically.
Pull the Thermal Module toward your and remove it.
Screw:Blue-B4,Red-B3
Harness
Thermal Module 

A Series
Confidential
Mother Board-1
1)1.MS-1-D.172)3)
Remove the one screw.Remove the Bracket (RJ11) and Cable (RJ11) .
Screw:B5
Harness
FPC
Mother Board
Bracket (RJ11)
Cable (RJ11)
Disconnect the Harness and FPC from the Mother Board vertically. 

A Series
Confidential
Mother Board-2
1)
2)1.MS-1-D.18
Raise the Mother Board from right side. Remove the 11 screws.
Mother Board
Connector
3)
Mother Board
Screw:Light blue- B13,Red-B5
Mother Board
*B13---Use a 4 mm socket wrench.
Pull out the Mother Board to the right to remove.
*Pay attention to the connector. It is easy to be caught to somewhere. 

A Series
Confidential
CNX-245 Board,Cable (ODD Eject)
1)
2)1.MS-1-D.193) 4)
Remove the two screws. 
Remove the CNX Board.
Remove the one screw and the Bracket (SW) .
Remove the Cable (ODD Eject) .
Screw:B5
CNX Board
Screw:B5
Cable (ODD Eject)
Bracket (SW)
Cable (ODD Eject) 

A Series
Confidential
Parts of the Housing (Bottom)
1)1.MS-1-D.203)
Remove the Lock (BATT) and the Latch (BATT) .
Screw:B5
Remove the two screws.
2)
Lever (Latch)
4)
Foot FrontHousing (Bottom)
Door(Dock)
Panel (Lens CTO)
Foot Front CenterRemove the part indicated by the arrow. 
* Disassembly the EMI Spring (BATT) and Lever (Latch) .
Remove the ten parts shown above from the bottom of the Housing.
Latch (BATT)
Lock (BATT)
EMI Spring (Batt)Foot Rear
Button (BATT)Button (BATT 3)Switch (W-
LAN)