Sony Vaio Sony Vaio Vgna Manual
Here you can view all the pages of manual Sony Vaio Sony Vaio Vgna Manual. The Sony manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 1
A Series Confidential Chapter 1. Disassembly & Assembly Guide 1.MS-1-D.1 1-3. Disassembly & Assembly - Main Section - MS-1Main Section Disassembly(15-inch Model)
Page 2
A Series Confidential Battery Pack 1) 2)1.MS-1-D.23) Button (Battery,3) Slide the Button (Battery,3) to the “UNLOCK” side. Button (Battery) Door (Battery) 3) Remove the Battery Pack. Battery Pack *There are four detents. Remove the Battery from one side detents (two places) . Slide the Button (Battery) in the direction of the arrow, and remove the Door (Battery) .
Page 3
A Series Confidential Screws(Bottom) 1)1.MS-1-D.3 Screw:Red-B7Light blue-B4Yellow green-B3Yellow-B5 Blue-B18Orange-B1 Remove the 22 screws (The Screws of the Palmrest are not denoted). Screw securing Key Board MBX (I/O bracketsecuring screw
Page 4
A Series Confidential Keyboard 1.MS-1-D.43) 4)1) Detent Keyboard 2) FPC DetentDisengage the three Detents. *Press them lightly, and the keyboard is unlocked. *Detents are located under the Ctrl, Space and End keys.Raise the Keyboard. Slide the Lock lever upward vertically to unlock the FPC. Remove the FPC vertically. Lock lever
Page 5
A Series Confidential Palmrest 1)1.MS-1-D.53) Remove the two Screws. Screw:Blue-B7,Red-B4 Palmrest FFC 2) FPC 4) Raise the Palmrest lightly, and remove the FFC vertically. Pull out the FPC vertically. Remove the Pamlrest. *There are three detents.
Page 6
A Series Confidential Bluetooth Module 1) 2)1.MS-1-D.63) 4) Kapton tape Cable (BT Antenna) IFX Board Cable (BT Antenna) Screw:B12 Connector Remove the Screw. Remove the Cable (BT Antenna) from the Housing (Bottom). Peel off the Kapton tape. Remove the Bluetooth Module from the IFX Board. *They are connected by the Connector. Bluetooth Equipped Model Housing (Bottom) Bluetooth Module
Page 7
A Series Confidential IFX-324 Board 1)1.MS-1-D.73) IFX Board Dowel FFC Screw:B7 2) Remove the three screws. Hold the area around the dowel and raise it to remove the IFX Board. *FFC is connected. Pull the FFC vertically to remove it from the Mother Board.
Page 8
A Series Confidential HDD 1) 2)1.MS-1-D.8 Screw:B7 HDD Remove the two screws. Raise the CNX Board portion that is connected to the HDD, and remove the HDD. *The connector is located on the back of the CNX Board. CNX Board Connector Portions
Page 9
A Series Confidential Parts of the HDD 1) 2)1.MS-1-D.93) HDDRemove the Bracket (two places). HDD Bracket RHDD Bracket L Screw:B11 4) Remove the IFX Board from the HDD. *Be careful not to bend the pins. Remove the screw each on the right and left. Remove the screw each on the right and left, and remove the EMI Spring (HDD). EMI Spring (HDD) Screw:B11 IFX Board
Page 10
A Series Confidential Optical Disc Drive 1)1.MS-1-D.10 Slide the Optical Disc Drive in the direction of the arrow to remove it. *The Connector is connected to the Main Board. 2) Main Board Connector Remove the Screw. Screw:B5 Optical Disc Drive