Sony Vaio Sony Vaio Vgna Manual
Have a look at the manual Sony Vaio Sony Vaio Vgna Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
A Series Confidential LCD Section-1 1) 2)1.MS-1-D.11 4) Wireless LAN card Cable (Wireless LAN) Peel off the Kapton Tape (two places), and remove the Cable. Cable (Wireless LAN) Disconnect the Cable (Wireless LAN) from the Wireless LAN Card. *Disconnect the Connector vertically with the tweezers or the like. 3) LCD Section Bottom section Cover (Hinge) Remove the Cover (two places)*Open the LCD as wide as possible, and hold the bottom section. Flip the large detent on the front side upward, and the Cover is easy to remove. Kapton Tape
A Series Confidential LCD Section-2 1.MS-1-D.123)4) Raise the LCD Section on your both hands to remove it. 1) Disconnect the Harness coming from the LCD. LCD Section Remove the two screws on the rear. Screw:B9 Screw:B7 Remove the three Screws each on the right and left. 2) *Hold the LCD Section not to tumble it while at work.
A Series Confidential Display Base 1) 2)1.MS-1-D.13 Remove the Display Base. Screw:B1 Remark ƒlƒW(7)Remove the seven screws. *It is recommended to disengaging the detents first in the direction of the arrows (left). Display Base
A Series Confidential Fin(Thermal Module) 1) 2)1.MS-1-D.14 Remove the three screws. Pull out the Fin (Thermal Module) toward you. Screw:B1 *Pull out the Fin from metallic box of the Thermal Module to remove it. Remark Fin(Thermal Module) Thermal Module
A Series Confidential CPU 1) 2)1.MS-1-D.15 Raise the CPU upward vertically to remove. *Be careful not to bend the pins. CPU Unlock the CPU by using a 4 mm flat head screwdriver as shown in the picture.
A Series Confidential Thermal Module 1) 2)1.MS-1-D.163) Remove the four screws.Disconnect the Harness vertically. Pull the Thermal Module toward your and remove it. Screw:Blue-B4,Red-B3 Harness Thermal Module
A Series Confidential Mother Board-1 1)1.MS-1-D.172)3) Remove the one screw.Remove the Bracket (RJ11) and Cable (RJ11) . Screw:B5 Harness FPC Mother Board Bracket (RJ11) Cable (RJ11) Disconnect the Harness and FPC from the Mother Board vertically.
A Series Confidential Mother Board-2 1) 2)1.MS-1-D.18 Raise the Mother Board from right side. Remove the 11 screws. Mother Board Connector 3) Mother Board Screw:Light blue- B13,Red-B5 Mother Board *B13---Use a 4 mm socket wrench. Pull out the Mother Board to the right to remove. *Pay attention to the connector. It is easy to be caught to somewhere.
A Series Confidential CNX-245 Board,Cable (ODD Eject) 1) 2)1.MS-1-D.193) 4) Remove the two screws. Remove the CNX Board. Remove the one screw and the Bracket (SW) . Remove the Cable (ODD Eject) . Screw:B5 CNX Board Screw:B5 Cable (ODD Eject) Bracket (SW) Cable (ODD Eject)
A Series Confidential Parts of the Housing (Bottom) 1)1.MS-1-D.203) Remove the Lock (BATT) and the Latch (BATT) . Screw:B5 Remove the two screws. 2) Lever (Latch) 4) Foot FrontHousing (Bottom) Door(Dock) Panel (Lens CTO) Foot Front CenterRemove the part indicated by the arrow. * Disassembly the EMI Spring (BATT) and Lever (Latch) . Remove the ten parts shown above from the bottom of the Housing. Latch (BATT) Lock (BATT) EMI Spring (Batt)Foot Rear Button (BATT)Button (BATT 3)Switch (W- LAN)