Sony Projector VPL-VW665 User Manual

41
Network Setting Perform internet protocol settings.
IPv4 SettingIP Address Setup: Selects the IP address setting method.
Auto (D HCP): The IP address is assigned automatically from the 
DHCP server such as a router.
Manual: Specifies the IP address manually.
When “Manual” is selected for “IP Address Setup,” select the item 
with the 

42
Information Menu
The Information menu displays the model name, serial number, input signal type, software 
version and the cumulated hours of usage of the lamp.
You cannot adjust or change the displays listed above.
This unit has default image data to adjust preset data for input signals appropriately according 
to the signals shown in “Preset Signals” (page 57) (the preset memory). When the preset signal 
is input, the unit automatically detects the signal type and recalls the data for the signal...

43
Connection to the network allows you to 
operate the following features:
 Checking the current status of the unit 
via a Web browser.
 Making the network settings for the 
unit.
 Network monitoring and controlling 
with control protocol (SDAP 
[Advertisement], SDCP [PJ Talk], 
DDDP [AMX], Crestron RoomView, 
Control4).
 When connecting this projector with the 
network, consult with the person who sets up 
the network. The network must be secured.
 When using this projector connected with the 
network,...

44
Once you make the network settings, 
you can open the Control window only 
by performing step 3 of this procedure.
Operating the 
Control Window
Click one of the Page Switching buttons to 
display the desired setting page.
You can limit a user for accessing any 
particular page.
Administrator: Allowed access to all 
pages
User: Allowed access to all pages 
except the Setup page
When you access the Setup page for the first 
time, input “root” as the user name and 
“Projector” as the password in the...

45
The password can be changed in the 
Password page in the Setup page.
When you change the password, input a new 
password after deleting the password 
(*****) that was set.
The password of the administrator and user 
should be 8 to 16 characters that includes 
both alphabet and numeric characters. 
Alphabet is case-sensitive.
The default password “Projector” cannot be 
set as a new password. 
If you forget your password, consult with 
qualified Sony personnel.
You can confirm the current settings for...

46
Troubleshooting
If the unit appears to be operating erratically, try to diagnose and correct the problem using the 
following instructions. If the problem persists, consult with qualified Sony personnel.
Power
Picture
Error Handling
SymptomCause and RemedyPage
The power is not turned 
on.The power may not turn on if you turn the power off with ?/
1 (ON/STANDBY) button and turn it on again in a short 
time. After about 1 minute, turn the power on.–
Close the lamp cover securely, then tighten the screws...

47
On-screen display
Remote control
The color of characters or 
the picture is not 
appropriate.Select the desired color registration in “Panel Alignment” of 
the Installation   menu.40
Image is left on the 
screen. (image retention)When high contrast non-moving images are displayed for a 
long period of time, there may be some image retention on 
the screen. This is only a temporary condition. Turning off 
the power for a while will eliminate the retained image.–
SymptomCause and RemedyPage
On-screen...

48
3D video images
Others
SymptomCause and RemedyPage
The video image does not 
seem like 3D video 
images.Check if the 3D glasses are turned on. 16
Make sure that the battery in the 3D glasses could be weak 
or is sufficiently charged.–
Set “2D-3D Display Sel.” to “Auto” or “3D.” 36
Check if the input signals are compatible 3D signals. 60
The 3D signals may not be input depending on the 
specifications of the connected AV selector/AV amplifier/
external equipment. If the 3D signal is not input, confirm...

49
Warning Indicators
The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with 
your projector.
When a warning indicator other than the above starts flashing, and the symptom persists even after 
carrying out the above methods, consult with qualified Sony personnel. 
Flashing/Lighting indicatorsThe number of 
flashesCause and Remedy
Twice Close the lamp cover securely, then tighten 
the screws securely (page 53).
Three times The temperature of lamp is unusually high. 
Turn...

50
Message Lists
Warning messages
Caution messages
SymptomCause and RemedyPage
High temp.! Lamp off in 
1 min.Turn off the power. –
Check to ensure that nothing is blocking the ventilation 
holes.4, 5
Frequency is out of 
range!Frequency is out of range. Input a signal that is within the 
acceptable frequency range of the unit.57
Please replace the Lamp. It is time to replace the lamp. Replace the lamp.
If this message appears again after you replace the lamp, the 
lamp replacement process is not...