Sony Projector VPL-VW365 User Manual

21
Setting menu
Adjustment menu
Next menu window
4Make the setting or adjustment of an 
item.
When changing the adjustment 
level
To increase the value, press M/,.
To decrease the value, press m/

22
Picture Menu
The Picture menu is used for adjusting the picture.
These items may not be available, depending on the type of input signal. For details, see “Input 
Signals and Adjustable/Setting Items” (page 54).
Item names in brackets represent those printed on the remote control.
Note
Setting items Description
Calib. Preset 
[CALIBRATED 
PRESET]You can select the picture viewing mode that best suits the type of video 
source or the environment.
You can save and use different preset modes for 2D/3D...

23
Reality Creation 
[REALITY 
CREATION]Adjusts the detail and noise processing of images. (Super-resolution 
function)
On: Adjusts the settings of “Reality Creation.”
Database: Select “Normal” or “Mastered in 4K.”
“Mastered in 4K” provides image quality suitable for Blu-ray Disc™ 
“Mastered in 4K” releasing from Sony Pictures Home Entertainment.
Resolution: When you increase the setting value, the texture and detail 
of the picture become sharper.
Noise Filtering: When you increase the setting value,...

24
Brightness
[BRIGHTNESS]Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The lower the setting, the 
darker the picture.
You can make adjustments by pressing the BRIGHTNESS +/- on the 
remote control.
Color Adjusts the color density.
The higher the setting, the greater the intensity. The lower the setting, the 
lower the intensity.
Hue Adjusts the color tone.
The higher the setting, the more greenish the picture becomes. The lower 
the setting, the more reddish...

25
MPEG NR 
(MPEG Noise 
Reduction)Reduces block noise and mosquito noise, in particular in digital signals.
Auto: Detects the noise level to reduce the block noise and mosquito 
noise of the picture automatically.
High/Middle/Low: Select a setting according to the block noise and 
mosquito noise of the input signal source.
Off: The MPEG NR (MPEG noise reduction) function is not applied.
Tip
The noise level may not be detected accurately with “Auto” depending 
on the input signal source. If the picture...

26
x.v.Color Set this item when connecting the unit with equipment that supports 
x.v.Color and playing back an x.v.Color video signal.
On: You can play back an x.v.Color video signal.
Off: The “x.v.Color” function is not applied.
For details on x.v.Color, see “About the x.v.Color” (page 46).
Tip
Setting x.v.Color to “On” disables gamma adjustment.
Color Space
[COLOR SPACE]Converts the color space.
BT.709: An ITU-R BT.709 color space, which is used for high-
definition television broadcast or Blu-ray...

27
Screen Menu
You can set the picture size, aspect mode, etc.
These items may not be available, depending on the type of input signal. For details, see “Input 
Signals and Adjustable/Setting Items” (page 54).
Item names in brackets represent those printed on the remote control.
Note
Setting items Description
Aspect
[ASPECT]You can set the aspect ratio of the picture to be displayed for the current 
input signal (page 16). 
You can set the function only when a video signal other than a resolution 
of...

28
Tips
 When you select “V Stretch” or “Squeeze,” select the anamorphic lens 
type from “Anamorphic Lens” in the Installation   menu.
 Selectable aspect modes vary depending on the input signal (page 57).
 The aspect cannot be selected for an input signal from a computer, or 
an input signal with a resolution of 4096 × 2160 (pages 52, 53, 57).
Blanking This feature allows you to adjust the displayable region within the four 
directions of the screen.
On: Select the edge to adjust by highlighting Left,...

29
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
Setting items Description
Status Sets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for certain menus, 
message when turning off the power, and warning messages.
Language Selects the language used in the menu and on-screen displays.
Menu Position You can change the position to display the menu on the screen.
Bottom Left: Displays the menu on the bottom left area of...

30
Network ManagementOn: Set when connected to the network and continuously 
communicating with the projector control equipment.
When Network Management is set to “On,” the network function is 
continuously enabled. Set Network Management to “Off” for normal 
use. If you set to “On,” the power consumption increases.
Power Saving Sets the power saving mode.
Standby: If no signal is input for 10 minutes, power is turned off 
automatically and the projector goes into standby mode.
Off: Disables the power...