Sony Projector VPL-VW365 User Manual

Operating Instructions
Before operating the unit, please read this manual and supplied Quick 
Reference Manual thoroughly and retain them for future reference.
VPL-VW365
4-580-167-01 (1)
Video Projector 

2
Table of Contents
Location of Controls
Front/Right Side  ................................ 3
Rear/Left Side/Bottom  ...................... 4
Remote Control  ................................. 5
Connections and 
Preparations
Installing the Unit  .............................. 6
Adjusting the Picture Position  ........... 7
Connecting to Video Equipment or a 
Computer ...................................... 11
Projecting
Projecting the Picture  ...................... 13
Turning Off the Power...

3
Front/Right Side
Warning indicators
aON/STANDBY indicator 
(page 44)
bWARNING indicator (page 44)
Connectors
cLAN connector (page 38)
dUSB connector (page 46)
eHDMI 1/HDMI 2 connector 
(page 11)
fREMOTE connector
Connects to a computer, etc. for remote 
control.
gIR IN connector 
Inputs signals to control the unit.
hTRIGGER 1/TRIGGER 2 
connector (page 34)
Others
iLamp cover (page 47)
j3D Sync Transmitter
Located on the inside of the lamp cover.
kVentilation holes (exhaust)
lVentilation holes (intake)...

4
Rear/Left Side/Bottom
The buttons on the control panel have the same names as those on the remote control.
Control panel
a?/1 (ON/STANDBY) button 
(page 7)
bINPUT button (page 13)
cMENU button (page 20)
dM/m/

5
Remote Control
aLIGHT button
Illuminates the buttons on the remote 
control.
bInfrared transmitter
c?/1 (ON/STANDBY) button 
(page 7)
dINPUT button (page 13)
eCALIBRATED PRESET buttons 
(page 19)
fPATTERN button (page 8)
gRESET button (page 21)
hM/m/

6
This section describes how to install the unit and screen, how to connect the equipment from 
which you want to project the picture, etc.
Installing the Unit
The installation distance between the unit 
and a screen varies depending on the size of 
the screen or whether or not you use the lens 
shift features. Install this unit so that it fits 
the size of your screen. For details on the 
distance between the unit and the screen (the 
projection distance) and the size of projected 
video, see...

7
Adjusting the Picture 
Position
Project an image on the screen and then 
adjust the picture position.
Tips
 The ?/1 (ON/STANDBY), INPUT, MENU, 
and M/m/

8
3Adjust the focus.
Press the PATTERN button repeatedly to 
display the Lens Focus adjustment 
window (test pattern). Then adjust the 
focus of the picture by pressing the M/m/

9
To adjust the horizontal position
Press 

10
Range of movement of the projected 
picture
To adjust the tilt of the installation 
surface
If the unit is installed on an uneven surface, 
use the front feet (adjustable) to keep the unit 
level.
 If the unit is tilted up or down, the projected 
image may be trapezoidal.
 Be careful not to catch your finger when 
turning the front feet (adjustable).
Lens adjustment window (test 
pattern)
Notes
0.85V
0.31H
H: Width of the projected picture
V: Height of the projected picture0.31H
0.8V Projected...