Sony Projector Vpl Vw12ht User Manual

21 (GB)
Projecting
The picture size for the screen size
Refer to the following for selecting the aspect.
When the 4:3 picture is displayed on the 16:9
screen
Example: The 120 inch screen is used.
The 98 inch picture is displayed1,992 2,656
1,494
16:9 screen 4:3 picture
Unit (mm) Unit (mm)
90 73
110 90
120 98
Size
(Inch)
2,656
1,494
1,494 1,992 2,435
1,370
1,370 1,826 1,121 1,992
1,121 1,494
Size
(Inch)
INPUT SETTINGVIDEO
ASPECT:VIDEO MEMORY:
VIDEO/60FULL
FULL THROUGH
NORMAL
NORMAL THROUGHZOOM
SUBTITLE...

22 (GB)
To turn off the power
To turn off the power from the control panel
1Press the I / 1 key on the control panel.
“Power OFF?” appears on the screen.
Note
The message will disappear if you press any key
except the I / 
1 key, or if you do not press any
key for five seconds.
2Press the I / 1 key again.
The ON/STANDBY indicator flashes in green and
the fan continues to run for about 120 seconds to
reduce internal heat build-up. Also, the
ON/STANDBY indicator flashes quickly for the
first 40 seconds....

23 (GB)
Using the Menu
The projector is equipped with an on-screen menu for
making various adjustments and settings.
You can select the language to be used in the menu.
For details on selecting the language used in the menu, see
page 18 (GB).
1Press the MENU key.
The menu display appears.
The menu presently selected is shown as a yellow
button.
PICTURE CTRL
CONTRAST: 80
BRIGHT: 50
RGB ENHANCER:30
COLOR TEMP: LOWINPUT-A
2Use the M or m key to select a menu, then press
the , or ENTER key.
The selected menu...

24 (GB)
The PICTURE CTRL Menu
The PICTURE CTRL (control) menu is used for
adjusting the picture.
Unadjustable items for a particular input signal are not
displayed in the menu.
CONTRAST
Adjusts the picture contrast.
The higher the setting, the greater the contrast.
The lower the setting, the lower the contrast.
BRIGHT
Adjusts the picture brightness.
The higher the setting, the brighter the picture.
The lower the setting, the darker the picture.
COLOR
Adjusts color intensity.
The higher the setting, the...

25 (GB)
(NTSC3.58/
4.43 only)
Input signals and adjustable/setting items
Input signal
Video or Compo-Pro-RGB1)B&W
S video (Y/C) nent/
gres-
15k RGBsive
Compo-
nent/
HDTV/
DTV
CONTRAST
BRIGHT
COLOR––
HUE
––
SHARP–
RGB––––
ENHANCER
D. PICTURE
––
COLOR
TEMP
COLOR
–––
SYS
DRC-MF
––
 : Adjustable/can be set
– : Not adjustable/can not be set
The INPUT SETTING Menu
The INPUT SETTING menu is used to adjust the
input signal.
Unadjustable items for a particular input signal are not
displayed in the menu.
DOT...

26 (GB)
SHIFT
Adjusts the position of the picture input from the
INPUT A/B connectors.
H adjusts the horizontal position of the picture.
V adjusts the vertical position of the picture.
As the setting for H increases, the picture moves to
the right, and as the setting decreases, the picture
moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the < or , key to adjust the horizontal position
and the M or m key for the vertical...

27 (GB)
The INPUT SETTING Menu
SCAN CONV (Scan converter)
Converts the signal to display the picture according to
the screen size.
ON: Enlarges the picture according to the screen
aspect. The picture will lose some clarity.
OFF: Displays the picture while matching one pixel
of the input picture element to that of the LCD.
The picture will be clear but the picture size will
be smaller.
Note
This item will not be displayed if you input an XGA
or SXGA signal.
V SCROLL
Adjusts the vertical position of the...

28 (GB)
Memory Preset signalfH fV SyncSIZENo.(kHz) (Hz)H
1Video 60 Hz15.734 59.940 H-neg V-neg 1050
2Video 50 Hz15.625 50.000 H-neg V-neg 1072
315k RGB/Component 60 Hz 15.734 59.940 1050
415k RGB/Component 50 Hz 15.625 50.000 1072
5HDTV(1080/60i) 33.750 60.000 2200
6640 × 350VGA mode 131.469 70.086 H-pos V-neg 800
7VGA VESA 85 Hz37.861 85.080 H-pos V-neg 832
8640 × 400PC-9801 Normal24.823 56.416 H-neg V-neg 848
9VGA mode 231.469 70.086 H-neg V-pos 800
10VGA VESA 85 Hz37.861 85.080 H-neg V-pos 832
11640 ×...

29 (GB)
The INPUT SETTING Menu
Since the data is recalled from the preset memory for
the following signals, you can use these preset data by
adjusting SIZE H. Make finer adjustments using
SHIFT.
Signal Memory No. SIZE H
Super Mac-2 23 1312
SGI-1 23 1320
Macintosh 19 25 1328
Macintosh 21 28 1456
Sony News 36 1708
PC-9821 36 1600
1280 × 1024
WS Sunmicro 37 1664
Notes
•A part of the screen is displayed in black depending
on the aspect ratio of the input signal.
•Use the following signals to input the sync...

30 (GB)
The SET SETTING Menu
The SET SETTING menu is used for changing the
settings of the projector.
STATUS (on-screen display)
Sets up the on-screen display.
ON: Shows all of the on-screen display.
OFF: Turns off the on-screen display except for the
menus, a message when turning off the power,
and warning messages.
INPUT-A
Selects the computer, component, DTV YPBPR or
DTV GBR signal input from the INPUT A
connectors.
Note
If the setting is not correct, “Please check INPUT-A
setting.” appears on the...