Sony Projector VPL-FHZ60 User Manual

21
Press the RESET key to restore the 
projected image before adjustment.*1
When correcting deflection on the 
top/bottom sides of the image
1Move x using V/v/B/b to select the 
side you want to correct.
2Press the ENTER key.
The cursor appears.
3Adjust the deflection of the side, using 
V/v/B/b.
You can adjust the center point of 
deflection using B/b. For the range of 
deflection, use V/v. You can adjust the 
top/bottom independently.Press the RESET key to restore the 
projected image before...

22
5Adjust the color matching setting.
Finely adjust each tone as necessary 
(page 35).
6Set the Edge Blending setting.
When overlaying multiple projections, 
the Edge Blending setting is available.
Select “Multi Screen” in the Installation 
menu, then select “Edge Blending” 
(page 35).
7Enable the Edge Blending function.
In “Blend Settings,” set “Edge 
Blending” to “On” for each blending 
position.
8Set the blending width.
Set the blending width according to the 
overlapping range for the source...

23
BAdjustments and Settings Using a Menu
Using a Menu
The menu displays used for the explanation 
below may be different depending on the 
model you are using.
1Press the MENU key to display the 
menu.
2Select the setting menu. 
Use the V or v key to select the setting 
menu, then press b or ENTER key.
3Select the setting item.
Use the V or v key to select the setting 
menu, then press b or ENTER key.
To return to the selection screen of the 
setting menu, press the B key or the 
RETURN key.
4Make the...

24
The Picture Menu
For adjusting the picture for each input signal.
Setting items Description
Picture ModeDynamic: Emphasizes the contrast to produce a “dynamic” picture.
Standard: Makes the picture be natural and well balanced.
Brightness Priority: Makes the picture bright to suit a bright environment.
Multi Screen: Optimizes the picture quality to suit projecting using multiple 
projectors.
Reset The picture settings are initialized to their factory preset values.
However, “Picture Mode” and “Custom...

25
*1: The projector may not be able to maintain the brightness in an environment with a lot of dust and 
dirt. Expert Setting
Reality 
CreationAdjusts the detail and noise processing of images. (Super-resolution function)
On: Adjusts the settings of “Reality Creation.”
Resolution: When you increase the setting value, the texture and detail of the 
image become sharper.
Noise Filtering: When you increase the setting value, the noise (picture 
roughness) becomes less prominent.
Test: On/Off: Switches “On”...

26
*2: The display position of the status during the test works together with the “Menu Position” setting 
(page 31).
*3: Available when a computer signal is input from the DVI-D input terminal (INPUT B), HDMI 
input terminal (INPUT C), or HDBaseT input terminal (INPUT D). This projector is not to be 
used as a device for medical diagnosis.
*4: When a video signal is input, this option is available.
*5: When a progressive signal is input, this option is not available. 

27
The Screen Menu
For adjusting the size, position, and aspect ratio of the projected image for each input signal.
*1:  Note that if the projector is used for profit or for public viewing, modifying the original picture 
by switching to the aspect mode may constitute an infringement of the rights of authors or 
producers, which are legally protected.
 Depending on the input signal or “Screen Aspect” setting, setting items for aspect ratio or 
some other setting items cannot be set in some cases, or...

28
*2: Available when a video signal is input from the RGB/YPBPR input terminal (INPUT A), DVI-D 
input terminal, HDMI input terminal, and HDBaseT terminal.
*3: Available when “Aspect” is “Zoom” and “Screen Aspect” is 16:10 or 16:9.
*4: Available when a computer signal is input from the RGB/YP
BPR input terminal (INPUT A).
*5: If the projected image includes a large amount of black portion around it, the APA function will 
not work properly and a part of the image may not be displayed on the screen. In...

29
Aspect
*1: If you select “Normal,” the image is 
projected in the same resolution as the 
input signal without changing the aspect 
ratio of the original image.
*2: If you select “Full 2,” the image is 
projected to fit the projected image size, 
regardless of the aspect ratio of the image.
*3: Depending on the input signal, the 
projected image may be projected as 
illustrated below. In this a case, select 
“16:9.”
*4: Depending on the input signal, the image 
may be projected as illustrated below....

30
The Function Menu
The Function menu is used for setting various functions of the projector.
*1: Executes APA when a computer signal is input via the RGB/YPBPR input terminal (INPUT A).
*2: When using the Twin Picture display mode and there is no input signal, the background will be 
black even if you set this item to “Image”. Setting items Description
Audio Output Vol. The higher the setting, the higher an audio level output from the audio 
output terminal. The lower the setting, the lower the audio...