Sony Projector Qualia 004 User Manual
Have a look at the manual Sony Projector Qualia 004 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
8081 Maintenance Troubleshooting (continued) Information panel display MessageCause/Remedy COVER FAILURE• The top cover or air filter is detached. Contact QUALIA Customer Service. LAMP FAILURE • The lamp has reached the end of its life. Contact QUALIA Customer Service. • Check to see whether or not the projector is being used at high altitudes. Contact QUALIA Customer Service. • The lamp temperature is high. Contact QUALIA Customer Service. FAN FAILURE• The fan is broken. Contact QUALIA Customer Service. TEMP FAILURE • The internal temperature is too high. Check to see if something is blocking the ventilation holes. Check to see if the air filter is clogged with dust. • Check to see whether or not the projector is being used at high altitudes. • Check to see whether or not the projector is tilted at an angle of more than 20 degrees. If the message persists, contact QUALIA Customer Service. POWER SYSTEM FAILURE• The electrical system has broken down. Contact QUALIA Customer Service. IRIS FAILURE• The optical iris is damaged. Contact QUALIA Customer Service. LENS PROTECTOR FAILURE• The lens protector is damaged. Contact QUALIA Customer Service. Please check Input-B Signal Sel.• Invalid input setting. Set “Input-B Signal Sel.” according to the input signal (see page 46). Please check DVI Signal Sel.• Invalid input setting. Set “DVI Signal Sel.” according to the input signal (see page 46). Frequency is out of range!• This input signal cannot be projected as the frequency is out of the acceptable range of the projector. Input a signal that is within the frequency range. ImageDirector Refer to the online help of the ImageDirector software when any messages are displayed on the screen while you are using the ImageDirector software. For details on connected equipment such as a computer, etc., refer to the operating instructions supplied with that equipment. Information panel display (continued) MessageCause/Remedy High temp! Switch to high altitude mode on?• When using the projector at an altitude of 1,500 m or higher, press the M button. Lamp/Filter life remains less than 50H.• The remaining life of the lamp and the air filter is 50 hours. Contact QUALIA Customer Service. Lamp/Filter life remains less than 15H.• The remaining life of the lamp and the air filter is 15 hours. Contact QUALIA Customer Service. End of Lamp/Filter life. Lamp off in 1min. • The lamp and the air filter life has reached the end. The lamp is automatically turned off in about a minute. Contact QUALIA Customer Service. High temp! Lamp off in 1min.• The internal temperature is too high. The lamp is automatically turned off in about a minute. Contact QUALIA Customer Service. Iris unit doesn't work.• The optical iris unit does not work. Contact QUALIA Customer Service.
8283 Specifications Optical characteristics Panel dispay 0.78-inch SXRD panel 6,220,800 pixels (2,073,600 × 3) Lamp Pure xenon lamp Projection picture size Range: 40 to 300 inches (16:9 screen as the basis) Electrical characteristics Color system NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N switched automatically/manually Acceptable range for computer signals fH: 19 to 72 kHz, fV: 48 to 92 Hz Input/Output VIDEO IN VIDEO: Phono type Composite video:1 Vp-p ±2 dB sync negative (75 ohms terminated) S VIDEO: Y/C mini DIN 4-pin type (female) Y (luminance): 1 Vp-p ±2 dB sync negative (75 ohms terminated) C (chrominance): burst 0.286 Vp-p ±2 dB (NTSC) (75 ohms terminated), burst 0.3 Vp-p ±2 dB (PAL) (75 ohms terminated) INPUT A Component/Progressive component/HD signal: Phono type INPUT B Component/Progressive component/HD signal/RGB: BNC type G: 0.7 Vp-p ±2 dB (75 ohms terminated) G with sync/Y: 1 Vp-p ±2 dB sync negative (75 ohms terminated) B/CB/PB: 0.7 Vp-p ±2 dB (75 ohms terminated) R/CR/PR: 0.7 Vp-p ±2 dB (75 ohms terminated) SYNC/HD: Composite sync input: 1-5 Vp-p high impedance, positive/negative Horizontal sync input: 1-5 Vp-p high impedance, positive/negative VD: Vertical sync input: 1-5 Vp-p high impedance, positive/negative DVI-D (TMDS) Digital RGB HDMI Digital RGB/Y CB(PB) CR(PR) REMOTE RS-232C: D-sub 9-pin (female) CONTROL S IN/PLUG IN POWER Stereo minijack 5 Vp-p TRIGGER Minijack, Power on: DC 12 V, 4.7 kohm output impedance Power off: 0 V NETWORK RJ-45 USB Type B Additional Information • Please note that the warranty card for this product will be mailed to you in the next two to three weeks. • Please verify entries and details in the warranty card, and keep it in a safe place. • If you have any problems using the projector or if any accessory is missing, contact QUALIA Customer Service. QUALIA Customer Service Toll-free number: 1-877-782-5423 Warranty card and after-sale services Additional Information
8485 Warning on power connection Use a proper power cord for your local power supply. The United States, CanadaContinental EuropeThe United Kingdom, Ireland, Australia, New Zealand Japan Plug typeCAT-019——CAT-109 Female endEF-28VEF-28VEF-28VEF-28V Cord typeSJTH05VV-FH05VV-FHVCTF Rated voltage & current15 A/125 V10 A/250 V10 A/250 V15 A/125 V Safety approvalUL/CSAVDEVDEDENANHO Cord length (max.)4.5 m——— General Dimensions 598 × 206 × 753 mm (23 5/8 × 8 1/8 × 29 3/4 inches) (w/h/d) Mass Approx. 40 kg (88 lb 3 oz) Power requirements AC 100 to 240 V, 50/60 Hz Power consumption Max. 980 W (Standby mode: 7.8 W) Operating temperature 0 ºC to 35 ºC (32 ºF to 95 ºF) Operating humidity 35 % to 85 % (no condensation) Storage temperature -20 ºC to +60 ºC (-4 ºF to +140 ºF) Storage humidity 10 % to 90 % Supplied accessories Remote RM-PJR1F (1) R03 (Size AAA) batteries (4) AC power cord set (1) “Owner's Guide” (this guide) (with a document case) (1) CD-ROM (ImageDirector) (1) End-User Licence Agreement (1) Air filter cover (1) Safety regulations UL60950, CSA No. 950, FCC class B, IC class B, EN 60950 (NEMKO), CE, C-T ick A nameplate that indicates the model and serial numbers is located beside the input jacks on the bottom of the projector. Design and specifications are subject to change without notice. Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Additional Information Specifications (Continued)
8687 Side Bottom ������������������ ���������� ������������������� ���������� ����������������� ������ ������� �������� ����� ��� �� ��� Unit: mm (inches) Front Top ������������������� ���������� ����� ����� ��������������� ������ ��������� ��� ������� Unit: mm (inches)Additional Information Specifications (Continued) Dimensions
8889 M MAC address...............................51 Mail Report function ..................70 Maintenance .................................74 Menu ...............................................30 MENU button ................21 , 23 , 30 Menu Color ...................................48 Menu Position ..............................48 MENU SETTING menu ..............48 Moisture condensation .............75 N NETWORK connector................67 O Operating the projector from a computer....................................68 P, Q PICTURE MODE..........................32 PICTURE MODE button ............23 PICTURE MUTING button ........22 PICTURE SETTING menu .........32 Plug holder ............................19 , 61 Power ......................................27 , 84 Power Saving ...............................47 Projector suspension support ................................60 , 62 R Remote....................................22 , 78 Detector .................................19 Infrared transmitter ............23 REMOTE connector ...................67 RESET button ..............................23 S Screen projection mode....28 , 41 Screen resolution ........................51 SET SETTING menu ...................46 Sharpness .....................................33 Shift ..........................................23 , 36 SHIFT button .........................21 , 27 Source Direct ........................23 , 47 SOURCE DIRECT button ..........23 Specifications ..............................83 STANDARD/Standard .........23 , 32 Standby mode .............................21 Status (on-screen display) .......48 Subnet Mask ................................51 S VIDEO .........................................22 T Test Patter n..................................50 Throwing distance ......................63 Title Area .......................................41 TRIGGER jack ..............................67 U USB connector............................67 USER ..............................................23 V Ventilation hole Exhaust ..................................19 Intake ......................................19 VIDEO .............................................22 V Keystone ....................................49 V Position ......................................41 W, X, Y War ning messages.....................79 Wide Mode .............................28 , 40 WIDE MODE button ...................23 Wired remote ................................23 Z Zoom.......................................23 , 40 ZOOM button ........................21 , 27 Symbol/Number ?/1 (on/standby) button....21 , 23 4:3 Default ....................................37 M/m/