Sony Peg N760c Clie Handheld Instructions Manual

201Chapter6Additional information
Using Memory Stick media to transfer data
You can use Memory Stick media to transfer your old CLIÉ handheld to
your new CLIÉ handheld.
Notes
•Use Memory Stick media that has sufficient free memory space.
•Make sure that the write protect tab on the Memory Stick media not set to LOCK.
1Insert Memory Stick media into your old CLIÉ handheld.
2Rotate the Jog Dial™ navigator to select MS Gate and then
press the Jog Dial navigator. Or tap the MS Gate 
 icon on
the Application...

202Chapter6Additional information
5Tap OK.
The data selected in step 3 is copied onto Memory Stick media.
6Remove the Memory Stick media from your old CLIÉ
handheld and then insert it into your new CLIÉ handheld.
7Rotate the Jog Dial navigator to select MS Gate and then
press the Jog Dial navigator. Or tap the MS Gate 
 icon on
the Application Launcher screen.
MS Gate starts. The data in your CLIÉ handheld is listed.
8Press the Jog Dial navigator to select MS.
You can also tap the arrow V in the upper...

203Chapter6Additional information
Performing HotSync between your old CLIÉ handheld and
the new Palm Desktop for CLIÉ software
You can use your other CLIÉ handhelds (PEG-S300, PEG-S320, PEG-N710C,
PEG-N610C) with the Palm Desktop for CLIÉ software supplied to this
newest CLIÉ handheld (PEG-N760C).
After setting up your CLIÉ handheld as indicated in the Read This First
manual, perform the HotSync operation as indicated on page 112.
 If you have any trouble with the HotSync operation, check the following....

204Chapter6Additional information
Precautions
Notes on use
•Take care not to scratch or damage your CLIÉ handheld’s screen or the
Graffiti® writing area. Always use the supplied stylus or a plastic-tipped
pointer to tap on the screen. Do not use a real pen, pencil, or other sharp
object on the screen.
•Do not expose your CLIÉ handheld to rain or moisture. Should water
enter the circuitry through the crevice around the front buttons, your
CLIÉ handheld may be damaged.
•Your CLIÉ handheld screen is made of...

205Chapter6Additional information
Battery considerations
Follow these precautions when you charge your CLIÉ handheld.
On charging
•It takes about four hours to charge your CLIÉ handheld when the battery
is empty.
•When you charge your CLIÉ handheld every day, it takes only a few
minutes to charge the battery.
•You can view data or play audio files with your CLIÉ handheld while it is
being charged.
On the battery life
•With a fully-charged battery, you can use your CLIÉ handheld for about
fifteen days, 30...

206Chapter6Additional information
Precautions
When your battery runs out
•When the battery runs out, a caution message appears on the screen. If
this occurs, perform a HotSync® operation to back up all your CLIÉ
handheld’s data on your computer. Then charge your CLIÉ handheld
using the cradle. This helps prevent accidental data loss.
•If your CLIÉ handheld does not turn on when you press the POWER
button, charge your CLIÉ handheld immediately.
•The remaining battery indicator does not always reflect the...

207Chapter6Additional information
Troubleshooting – Frequently Asked Questions
Continued on next page
This section describes how to solve common problems you may encounter
when using your CLIÉ handheld. If a problem arises, we suggest you charge
your CLIÉ handheld. If the problem persists, review the following list of
frequently asked questions for possible solutions before you contact Sony
Customer Information Service Center.
Note
Thousands of third-party add-on applications are available for the Palm...

208Chapter6Additional information
My CLIÉ handheld keeps turning itself off.
,Your CLIÉ handheld is designed to turn itself off after a period of
inactivity. This period can be set at one, two, or three minutes. See
“Setting the automatic shut-off time” (page 176).
My CLIÉ handheld is not making any sounds.
,Check the System Sound setting. See “Setting sounds” (page 177).
,You can only hear such sounds through the supplied headphones if
you have them connected to the CLIÉ handheld.
My CLIÉ handheld has...

209Chapter6Additional information
Tapping and writing problems
When I tap the buttons or screen icons, my CLIÉ handheld
activates the wrong feature.
,Calibrate the screen. See “What you can do with Preferences”
(page 165).
When I tap the Menu icon, nothing happens.
,Not all applications or screens have menus. Try changing to a
different application.
I cannot get my CLIÉ handheld to recognize my handwriting.
,For your CLIÉ handheld to recognize handwriting input with the
stylus, you need to use Graffiti
®...

210Chapter6Additional information
Application problems
I tapped the Today button, but it does not show the correct
date.
,Your CLIÉ handheld is not set to the current date. Make sure the Set
Date box in the Date & Time Preferences screen displays the current
date. See “Setting the Date & Time preferences” (page 173).
,Your CLIÉ handheld is not set to the correct time zone or the correct
daylight saving setting. Make sure the Set Time Zone box and the
Daylight Saving box in the Date & Time Preferences...